If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#31
|
|||
|
|||
Event viewer
http://en.wikipedia.org/wiki/IPsec Read Standards status
Important Information Call AT&T for Help on IPSec AT&T is the one making the Error I Believe it's Not Norton or Windows do it But your .AT&T routers firewall is running IPsec with IPv6 "William B. Lurie" wrote in message ... Bruce Chambers wrote: William B. Lurie wrote: You nice folks led me to Event Viewer not too long ago, and in studying it, I find under Applications that Automatic Live Update is being run every 3 hours. It isn't my Norton Anti- Virus Live Update, and I do not allow Windows Live Update to run. Or at least I think I have it set so that I run Windows Update when I choose to do so. How can I track down what is running so often, and preventing my system from hibernating as a result? Thank you. Many applications now install automatic update "features," so it's a bit hard to narrow it down. Do you have, for instance, Java or Acrobat Reader installed? Both have automatic updates features that the computer user is not warned about when installing them. Also, while I don't think this is the cause in this particular case, do you have your WinXP clock configured to automatically synchronize with an Internet time server? (Haven't used WinXP for a couple of years, so I've forgotten some of the details, such as the frequency of those checks.) To try narrowing down which application is doing this, double-click on the pertinent entry in the application log to see if it will identify a specific executable file's name. You can also use MSConfig to see what is starting with the computer. Also, just in case someone tried to be clever, you can check for Scheduled Tasks that would show up in the usual "Startup" locations. Thanks for the added clues, Bruce. I do get notices about downloading updates for Adobe Reader, but never Java. The only clock reset that I have pings an atomic clock site, but only on my request. As I messaged, I found in Norton System Works a place that ostensibly turns off auto updates, and I'll look again tomorrow to see what happened overnight. And it's back to hibernating after an hour so maybe the intrusions have ceased. |
Ads |
#32
|
|||
|
|||
Event viewer
http://en.wikipedia.org/wiki/IPsec Read Standards status
Important Information Call AT&T for Help on IPSec AT&T is the one making the Error I Believe it's Not Norton or Windows do it But your .AT&T routers firewall is running IPsec with IPv6 "William B. Lurie" wrote in message ... Bruce Chambers wrote: William B. Lurie wrote: You nice folks led me to Event Viewer not too long ago, and in studying it, I find under Applications that Automatic Live Update is being run every 3 hours. It isn't my Norton Anti- Virus Live Update, and I do not allow Windows Live Update to run. Or at least I think I have it set so that I run Windows Update when I choose to do so. How can I track down what is running so often, and preventing my system from hibernating as a result? Thank you. Many applications now install automatic update "features," so it's a bit hard to narrow it down. Do you have, for instance, Java or Acrobat Reader installed? Both have automatic updates features that the computer user is not warned about when installing them. Also, while I don't think this is the cause in this particular case, do you have your WinXP clock configured to automatically synchronize with an Internet time server? (Haven't used WinXP for a couple of years, so I've forgotten some of the details, such as the frequency of those checks.) To try narrowing down which application is doing this, double-click on the pertinent entry in the application log to see if it will identify a specific executable file's name. You can also use MSConfig to see what is starting with the computer. Also, just in case someone tried to be clever, you can check for Scheduled Tasks that would show up in the usual "Startup" locations. Thanks for the added clues, Bruce. I do get notices about downloading updates for Adobe Reader, but never Java. The only clock reset that I have pings an atomic clock site, but only on my request. As I messaged, I found in Norton System Works a place that ostensibly turns off auto updates, and I'll look again tomorrow to see what happened overnight. And it's back to hibernating after an hour so maybe the intrusions have ceased. |
#33
|
|||
|
|||
Event viewer
http://www.att.com/esupport/search.j...01&x=22& y=10
"William B. Lurie" wrote in message ... Gerry wrote: William http://www.eventid.net/display.asp?e...ri ty&phase=1 Thanks for the referral, Gerry. I appreciate your effort to be helpful.....but I found nothing there that would help me understand the source of the message, or lead me to a solution. I surmise that I am just not up to it. |
#34
|
|||
|
|||
Event viewer
http://www.att.com/esupport/search.j...01&x=22& y=10
"William B. Lurie" wrote in message ... Gerry wrote: William http://www.eventid.net/display.asp?e...ri ty&phase=1 Thanks for the referral, Gerry. I appreciate your effort to be helpful.....but I found nothing there that would help me understand the source of the message, or lead me to a solution. I surmise that I am just not up to it. |
#35
|
|||
|
|||
Event viewer
On Feb 14, 7:03*am, "Gerry" wrote:
Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. I find no use for the constant logging of routine events. I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! |
#36
|
|||
|
|||
Event viewer
On Feb 14, 7:03*am, "Gerry" wrote:
Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. I find no use for the constant logging of routine events. I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! |
#37
|
|||
|
|||
Event viewer
Jose wrote:
On Feb 14, 7:03 am, "Gerry" wrote: Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. I find no use for the constant logging of routine events. I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! Jose, I'm willing to stop logging except while we're trouble-shooting. I imagine I can find out how, but that's a side issue. The screen-saver works *most* of the time, except when these events prevent it. SP3 forced things on me that I didn't like and don't recall what they were, and couldn't undo except by going back to SP2. One of them I think had to do with automatic live update for Windows, which I most assuredly resented. The hotfix you mentioned seems to be a KB fix that I'd welcome a link to........ |
#38
|
|||
|
|||
Event viewer
Jose wrote:
On Feb 14, 7:03 am, "Gerry" wrote: Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. I find no use for the constant logging of routine events. I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! Jose, I'm willing to stop logging except while we're trouble-shooting. I imagine I can find out how, but that's a side issue. The screen-saver works *most* of the time, except when these events prevent it. SP3 forced things on me that I didn't like and don't recall what they were, and couldn't undo except by going back to SP2. One of them I think had to do with automatic live update for Windows, which I most assuredly resented. The hotfix you mentioned seems to be a KB fix that I'd welcome a link to........ |
#39
|
|||
|
|||
Event viewer
On Feb 15, 9:24*am, "William B. Lurie" wrote:
Jose wrote: On Feb 14, 7:03 am, "Gerry" wrote: Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. *I find no use for the constant logging of routine events. *I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. *My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! *It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. *Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! Jose, I'm willing to stop logging except while we're trouble-shooting. I imagine I can find out how, but that's a side issue. The screen-saver works *most* of the time, except when these events prevent it. SP3 forced things on me that I didn't like and don't recall what they were, and couldn't undo except by going back to SP2. One of them I think had to do with automatic live update for Windows, which I most assuredly resented. The hotfix you mentioned seems to be a KB fix that I'd welcome a link to........ I thought I sent all that aready - maybe to somebody else: http://support.microsoft.com/kb/909095 |
#40
|
|||
|
|||
Event viewer
On Feb 15, 9:24*am, "William B. Lurie" wrote:
Jose wrote: On Feb 14, 7:03 am, "Gerry" wrote: Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. *I find no use for the constant logging of routine events. *I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. *My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! *It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. *Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! Jose, I'm willing to stop logging except while we're trouble-shooting. I imagine I can find out how, but that's a side issue. The screen-saver works *most* of the time, except when these events prevent it. SP3 forced things on me that I didn't like and don't recall what they were, and couldn't undo except by going back to SP2. One of them I think had to do with automatic live update for Windows, which I most assuredly resented. The hotfix you mentioned seems to be a KB fix that I'd welcome a link to........ I thought I sent all that aready - maybe to somebody else: http://support.microsoft.com/kb/909095 |
#41
|
|||
|
|||
Event viewer
Jose wrote:
On Feb 15, 9:24 am, "William B. Lurie" wrote: Jose wrote: On Feb 14, 7:03 am, "Gerry" wrote: Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. I find no use for the constant logging of routine events. I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! Jose, I'm willing to stop logging except while we're trouble-shooting. I imagine I can find out how, but that's a side issue. The screen-saver works *most* of the time, except when these events prevent it. SP3 forced things on me that I didn't like and don't recall what they were, and couldn't undo except by going back to SP2. One of them I think had to do with automatic live update for Windows, which I most assuredly resented. The hotfix you mentioned seems to be a KB fix that I'd welcome a link to........ I thought I sent all that aready - maybe to somebody else: http://support.microsoft.com/kb/909095 Thanks, I installed that KB item. Had not seen it before. |
#42
|
|||
|
|||
Event viewer
Jose wrote:
On Feb 15, 9:24 am, "William B. Lurie" wrote: Jose wrote: On Feb 14, 7:03 am, "Gerry" wrote: Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. I find no use for the constant logging of routine events. I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! Jose, I'm willing to stop logging except while we're trouble-shooting. I imagine I can find out how, but that's a side issue. The screen-saver works *most* of the time, except when these events prevent it. SP3 forced things on me that I didn't like and don't recall what they were, and couldn't undo except by going back to SP2. One of them I think had to do with automatic live update for Windows, which I most assuredly resented. The hotfix you mentioned seems to be a KB fix that I'd welcome a link to........ I thought I sent all that aready - maybe to somebody else: http://support.microsoft.com/kb/909095 Thanks, I installed that KB item. Had not seen it before. |
#43
|
|||
|
|||
Event viewer
On Feb 15, 11:07*am, "William B. Lurie" wrote:
Jose wrote: On Feb 15, 9:24 am, "William B. Lurie" wrote: Jose wrote: On Feb 14, 7:03 am, "Gerry" wrote: Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. *I find no use for the constant logging of routine events. *I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. *My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! *It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. *Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! Jose, I'm willing to stop logging except while we're trouble-shooting. I imagine I can find out how, but that's a side issue. The screen-saver works *most* of the time, except when these events prevent it. SP3 forced things on me that I didn't like and don't recall what they were, and couldn't undo except by going back to SP2. One of them I think had to do with automatic live update for Windows, which I most assuredly resented. The hotfix you mentioned seems to be a KB fix that I'd welcome a link to........ I thought I sent all that aready - maybe to somebody else: http://support.microsoft.com/kb/909095 * Thanks, I installed that KB item. Had not seen it before. Good. Reboot, set your hibernate to something like 5 minutes and see how it goes. XP needs to think your system is idle before it will hibernate. If you are running some scan (at least for me) the scan has to complete, then the hibernate countdown starts. Try not to troubleshoot too many things at once - just fix one thing at a time. |
#44
|
|||
|
|||
Event viewer
On Feb 15, 11:07*am, "William B. Lurie" wrote:
Jose wrote: On Feb 15, 9:24 am, "William B. Lurie" wrote: Jose wrote: On Feb 14, 7:03 am, "Gerry" wrote: Jose Do you have success audits enabled? Obviously the answer is Yes; otherwise there would not be any reports! The computer has Windows XP Home Edition installed. I have never altered the default with regard to Auditing Entries. I realise as a result of Peter's response that I could and that the Security tabs can be displayed if a default is changed.http://www.dougknox.com/xp/tips/xp_security_tab.htm What is the point in investigating a Success Audit? An Audit Failure makes more sense because it is reporting some wrong. Understanding a Failure could pinpoint what is causing a problem. I have seen Failures in the past but not recently. If I am not looking into a problem, I will turn all that stuff off. It is extra I/O I don't need and would rather my CPU time be spent doing things I want. *I find no use for the constant logging of routine events. *I don't look at my Event Log unless I am suspicious of a problem which is almost never - or trying to help someone else with their problem which is often. *My event logs are no longer intellectually stimulating. If other folks want to log all that stuff, more power to 'em. I just chose not to! *It is also possible that with my tinkering over the years my XP has been installed, I changed some of the Event Log settings so they may not match yours. *Maybe we are not even talking about the same things anymore. Okay - I don't to get bogged down with it and would rather move on. The OP still does't seem to be able to hibernate reliably, his screen saver doesn't work, he does not have SP3, has not said the hotfix to fix hibernating for SP2 was installed, and has not described the SP3 anomalies. I think I'll just watch that for a while! Jose, I'm willing to stop logging except while we're trouble-shooting. I imagine I can find out how, but that's a side issue. The screen-saver works *most* of the time, except when these events prevent it. SP3 forced things on me that I didn't like and don't recall what they were, and couldn't undo except by going back to SP2. One of them I think had to do with automatic live update for Windows, which I most assuredly resented. The hotfix you mentioned seems to be a KB fix that I'd welcome a link to........ I thought I sent all that aready - maybe to somebody else: http://support.microsoft.com/kb/909095 * Thanks, I installed that KB item. Had not seen it before. Good. Reboot, set your hibernate to something like 5 minutes and see how it goes. XP needs to think your system is idle before it will hibernate. If you are running some scan (at least for me) the scan has to complete, then the hibernate countdown starts. Try not to troubleshoot too many things at once - just fix one thing at a time. |
#45
|
|||
|
|||
Event viewer
Jose wrote: On Feb 12, 6:10 am, "William B. Lurie" wrote: You nice folks led me to Event Viewer not too long ago, and in studying it, I find under Applications that Automatic Live Update is being run every 3 hours. It isn't my Norton Anti- Virus Live Update, and I do not allow Windows Live Update to run. Or at least I think I have it set so that I run Windows Update when I choose to do so. How can I track down what is running so often, and preventing my system from hibernating as a result? Thank you. Provide more information: Minimize back and forth Q&A and eliminate guesswork and assumptions: Click Start, Run and in the box enter: msinfo32 Click OK, and when the System Summary info appears, click Edit, Select All, Copy and then paste back here. There will be some personal information (like System Name and User Name), and whatever appears to be private information to you, just delete from the pasted information. What are your system settings regarding Hibernation? Mine is set to hibernate after 30 minutes of inactivity, but I can also hibernate anytime. Which does not work for you? Has hibernation ever worked? If you click Start, Turn Off Computer and press the Shift key, does the Stand By button turn into a Hibernate button and then if you click Hibernate does your system enter hibernation? Let's see this event you see: Look in the Event Viewer for clues around the time of the incident Here is a method to post the specific information about individual events. To see the Event Viewer logs, click Start, Settings, Control Panel, Administrative Tools, Event Viewer. A shortcut to Event Viewer is to click Start, Run and in the box enter: %SystemRoot%\system32\eventvwr.msc Click OK to launch the Event Viewer. The most interesting logs are usually the Application and System. Some logs may be almost or completely empty. Not every event is a problem, some are informational messages that things are working okay and some are warnings. No event should defy reasonable explanation. Each event is sorted by Date and Time. Errors will have red Xs, Warnings will have yellow !s. Information messages have white is. Not every Error or Warning event means there is a serious issue. Some are excusable at startup time when Windows is booting. Try to find just the events at the date and time around your problem. If you double click an event, it will open a Properties windows with more information. On the right are black up and down arrow buttons to scroll through the open events. The third button that looks like two pages on top of each other is used to copy the event details to your Windows clipboard. When you find an interesting event that occurred around the time of your issue, click the third button under the up and down arrows to copy the details and then you can paste the details (right click, Paste or CTRL-V) the detail text back here for analysis. To get a fresh start on any Event Viewer log, you can choose to clear the log (backing up the log is offered), then reproduce your issue, then look at just the events around the time of your issue. Okay, Jose, one mo' time: Event Type: Error Event Source: ati2mtag Event Category: CRT Event ID: 45062 Date: 2/16/2010 Time: 1:03:13 PM User: N/A Computer: COMPAQ-2006 Description: CRT invalid display type Data: 0000: 00 00 00 00 01 00 5a 00 ......Z. 0008: 2c 00 00 00 06 b0 00 c0 ,....°.À 0010: 00 00 00 00 00 00 00 00 ........ 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ The above is the Event that occurs every time the Power Options is invoked (I think). How do I find out what it doesn't like about my CRT? |
Thread Tools | |
Display Modes | |
|
|