If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Win7 Backup Image Utility
I make backup inages via the tool that comes with Windows 7. My drive is 500GB
(with 40GB currently on it) and the drive I put the image to is 60GB. Obviously each time I backup a new image to it the previous one is gone. But now for a destination drive I use a 320GB. The way I figure it I should get at LEAST 5 images on it but Windows keeps deleteing the previous one. If I split the destination drive into 5 partitions (320/5) and each time I back up use a different partition will those images have a good integrity for restore if needed? I would hate to have a false sense of security. TIA, Dennis ================== |
Ads |
#2
|
|||
|
|||
Win7 Backup Image Utility
Remove the XX's wrote:
I make backup inages via the tool that comes with Windows 7. My drive is 500GB (with 40GB currently on it) and the drive I put the image to is 60GB. Obviously each time I backup a new image to it the previous one is gone. But now for a destination drive I use a 320GB. The way I figure it I should get at LEAST 5 images on it but Windows keeps deleteing the previous one. If I split the destination drive into 5 partitions (320/5) and each time I back up use a different partition will those images have a good integrity for restore if needed? I would hate to have a false sense of security. TIA, Dennis ================== On Windows 7, I've only used the System Image capability, rather than the other (file mode?) backup. I experienced the same thing. If I make a fresh image, the other one is erased and the new one takes its place. To stop that, I transfer the backup to any other place. Just move it out of the way, Then run your new backup, and see what happens. Then, for fun, run your recovery boot CD (or installer DVD), and go to the restore menu. Did the disk scan find both images or not ? That's the test you want to try. My experience was, there was an extended search interval during recovery, where the software searches for images. Maybe, it can find that image, if it is moved out of the way. And, it should show the date the backup was made. There's a fair amount of metadata in the folder, with the actual image files. Paul |
#3
|
|||
|
|||
Win7 Backup Image Utility
In article , Paul wrote:
On Windows 7, I've only used the System Image capability, rather than the other (file mode?) backup. I experienced the same thing. If I make a fresh image, the other one is erased and the new one takes its place. To stop that, I transfer the backup to any other place. Just move it out of the way, Then run your new backup, and see what happens. Then, for fun, run your recovery boot CD (or installer DVD), and go to the restore menu. Did the disk scan find both images or not ? That's the test you want to try. My experience was, there was an extended search interval during recovery, where the software searches for images. Maybe, it can find that image, if it is moved out of the way. And, it should show the date the backup was made. There's a fair amount of metadata in the folder, with the actual image files. Paul Thanx Paul, I'll play with that scenerio. I also just split my 320GB into 5 partitions. I'm also going to play with that. One good thing is that the Image utility is pretty quick so it's fairly easy to play around. Dennis =========== |
#4
|
|||
|
|||
Win7 Backup Image Utility
Paul wrote:
Remove the XX's wrote: I make backup inages via the tool that comes with Windows 7. My drive is 500GB (with 40GB currently on it) and the drive I put the image to is 60GB. Obviously each time I backup a new image to it the previous one is gone. But now for a destination drive I use a 320GB. The way I figure it I should get at LEAST 5 images on it but Windows keeps deleteing the previous one. If I split the destination drive into 5 partitions (320/5) and each time I back up use a different partition will those images have a good integrity for restore if needed? I would hate to have a false sense of security. TIA, Dennis ================== On Windows 7, I've only used the System Image capability, rather than the other (file mode?) backup. I experienced the same thing. If I make a fresh image, the other one is erased and the new one takes its place. To stop that, I transfer the backup to any other place. Just move it out of the way, Then run your new backup, and see what happens. Then, for fun, run your recovery boot CD (or installer DVD), and go to the restore menu. Did the disk scan find both images or not ? That's the test you want to try. My experience was, there was an extended search interval during recovery, where the software searches for images. Maybe, it can find that image, if it is moved out of the way. And, it should show the date the backup was made. There's a fair amount of metadata in the folder, with the actual image files. Paul Yes. I do that. I copy previous image to a folder on the same drive. My experience of using the recovery option was that it only found the one in the root of the drive. So I switched to Paragon images when I found on testing that it found all its stuff. Ed |
#5
|
|||
|
|||
Win7 Backup Image Utility
On 21/11/2012 10:03 PM, Remove the XX's wrote:
I make backup inages via the tool that comes with Windows 7. My drive is 500GB (with 40GB currently on it) and the drive I put the image to is 60GB. Obviously each time I backup a new image to it the previous one is gone. But now for a destination drive I use a 320GB. The way I figure it I should get at LEAST 5 images on it but Windows keeps deleteing the previous one. If I split the destination drive into 5 partitions (320/5) and each time I back up use a different partition will those images have a good integrity for restore if needed? I would hate to have a false sense of security. TIA, Dennis ================== For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. |
#6
|
|||
|
|||
Win7 Backup Image Utility
On Thu, 22 Nov 2012 17:23:19 -0800 "Anthony Buckland"
wrote in article N- For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. I second that! Used it for years and it's saved my bacon a time or two. |
#7
|
|||
|
|||
Win7 Backup Image Utility
On Thu, 22 Nov 2012 17:23:19 -0800 "Anthony Buckland" wrote in article N- For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. wrote: I second that! Used it for years and it's saved my bacon a time or two. I agree guys, done a half dozen or so 'disaster' restores over the years using xcopy32 /c/h/e/r/k on 95, XXCLONE or Ghost on XP and now Win7's tool. I figured out the issue...you have to go through the restore from Windows then reboot to see the saved backups in Backup and Restore manager. I could swear I set it to restore from Safe Mode a while back but I must be confused. Also the Win7 recovery disk works fine too. To get around losing the previous backups on the destination drive I just made 5-60GB Partions. I have about 40GB on my drive so I should be good for while. In theory I should only want the most recent but it's the paranoia factor..... Dennis =============== |
#8
|
|||
|
|||
Win7 Backup Image Utility
On 11/22/2012 9:07 PM, Jason wrote:
On Thu, 22 Nov 2012 17:23:19 -0800 "Anthony Buckland" wrote in articleN- For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. I second that! Used it for years and it's saved my bacon a time or two. I've been burned by Acronis for many years. It will make backups all day long faithfully. When it comes to restoring, it can't see some USB drives that it had saved files on for years. And this is a known Acronis problem. And no other backup software has this major flaw. -- Bill Gateway M465e ('06 era) - Thunderbird v12 Centrino Core2 Duo T7400 2.16 GHz - 4GB - Windows 8 |
#9
|
|||
|
|||
Win7 Backup Image Utility
On Fri, 23 Nov 2012 05:06:15 -0600, BillW50 wrote:
On 11/22/2012 9:07 PM, Jason wrote: On Thu, 22 Nov 2012 17:23:19 -0800 "Anthony Buckland" wrote in articleN- For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. I second that! Used it for years and it's saved my bacon a time or two. I've been burned by Acronis for many years. It will make backups all day long faithfully. When it comes to restoring, it can't see some USB drives that it had saved files on for years. And this is a known Acronis problem. And no other backup software has this major flaw. I have Shadowprotect, possibly the most expensive backup/recovery software. It will backup to anything writeable, but if you want to recover your system disk you have to boot from the SP stand-alone disk and that cannot see USB3 drives, as far as I can tell. -- Robin Bignall Herts, England |
#10
|
|||
|
|||
Win7 Backup Image Utility
On 23/11/2012 11:38 AM, Robin Bignall wrote:
On Fri, 23 Nov 2012 05:06:15 -0600, BillW50 wrote: On 11/22/2012 9:07 PM, Jason wrote: On Thu, 22 Nov 2012 17:23:19 -0800 "Anthony Buckland" wrote in articleN- For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. I second that! Used it for years and it's saved my bacon a time or two. I've been burned by Acronis for many years. It will make backups all day long faithfully. When it comes to restoring, it can't see some USB drives that it had saved files on for years. And this is a known Acronis problem. And no other backup software has this major flaw. I have Shadowprotect, possibly the most expensive backup/recovery software. It will backup to anything writeable, but if you want to recover your system disk you have to boot from the SP stand-alone disk and that cannot see USB3 drives, as far as I can tell. Can you connect your USB3 device to a USB2 port ? That port likely uses a different driver. Paul |
#11
|
|||
|
|||
Win7 Backup Image Utility
On 11/23/2012 10:38 AM, Robin Bignall wrote:
On Fri, 23 Nov 2012 05:06:15 -0600, wrote: On 11/22/2012 9:07 PM, Jason wrote: On Thu, 22 Nov 2012 17:23:19 -0800 "Anthony Buckland" wrote in articleN- For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. I second that! Used it for years and it's saved my bacon a time or two. I've been burned by Acronis for many years. It will make backups all day long faithfully. When it comes to restoring, it can't see some USB drives that it had saved files on for years. And this is a known Acronis problem. And no other backup software has this major flaw. I have Shadowprotect, possibly the most expensive backup/recovery software. It will backup to anything writeable, but if you want to recover your system disk you have to boot from the SP stand-alone disk and that cannot see USB3 drives, as far as I can tell. Those boot up disks generally use Linux or WinPE as an OS just to run the application. And it sounds like whatever OS it is using, doesn't have the correct driver for USB3 ports. -- Bill Gateway M465e ('06 era) - Thunderbird v12 Centrino Core2 Duo T7400 2.16 GHz - 4GB - Windows 8 |
#12
|
|||
|
|||
Win7 Backup Image Utility
On Fri, 23 Nov 2012 12:31:33 -0500, Paul wrote:
On 23/11/2012 11:38 AM, Robin Bignall wrote: On Fri, 23 Nov 2012 05:06:15 -0600, BillW50 wrote: On 11/22/2012 9:07 PM, Jason wrote: On Thu, 22 Nov 2012 17:23:19 -0800 "Anthony Buckland" wrote in articleN- For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. I second that! Used it for years and it's saved my bacon a time or two. I've been burned by Acronis for many years. It will make backups all day long faithfully. When it comes to restoring, it can't see some USB drives that it had saved files on for years. And this is a known Acronis problem. And no other backup software has this major flaw. I have Shadowprotect, possibly the most expensive backup/recovery software. It will backup to anything writeable, but if you want to recover your system disk you have to boot from the SP stand-alone disk and that cannot see USB3 drives, as far as I can tell. Can you connect your USB3 device to a USB2 port ? That port likely uses a different driver. I'm sure I can, but my external is an exact copy of one of my internals, so I can always get at my backups. -- Robin Bignall Herts, England |
#13
|
|||
|
|||
Win7 Backup Image Utility
On Fri, 23 Nov 2012 12:41:56 -0600, BillW50 wrote:
On 11/23/2012 10:38 AM, Robin Bignall wrote: On Fri, 23 Nov 2012 05:06:15 -0600, wrote: On 11/22/2012 9:07 PM, Jason wrote: On Thu, 22 Nov 2012 17:23:19 -0800 "Anthony Buckland" wrote in articleN- For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. I second that! Used it for years and it's saved my bacon a time or two. I've been burned by Acronis for many years. It will make backups all day long faithfully. When it comes to restoring, it can't see some USB drives that it had saved files on for years. And this is a known Acronis problem. And no other backup software has this major flaw. I have Shadowprotect, possibly the most expensive backup/recovery software. It will backup to anything writeable, but if you want to recover your system disk you have to boot from the SP stand-alone disk and that cannot see USB3 drives, as far as I can tell. Those boot up disks generally use Linux or WinPE as an OS just to run the application. And it sounds like whatever OS it is using, doesn't have the correct driver for USB3 ports. Yes, it's some sort of Windows: the Vista logo comes up while booting. Indeed, it does not have the USB3 drivers. But there's a function called 'Load drivers' that you can run before looking for backups, and which you can point to the USB3 drivers you need. I haven't got that to work because of my lack of knowledge of exactly what drivers I need for USB3. (This is the trouble, I feel, for complex pieces of software with lots of functions, that one uses once in a blue moon. I shall never, ever master Paintshop Pro for exactly the same reason!) SP is pretty clever, and will do a restore to quite different hardware if you choose. Instead of asking for a simple restore plus setting the target as bootable etc, you do an HIR (Hardware Independent) Restore. Somewhere you get to load the drivers for your new hardware, and the restore incorporates them. That works, because I've done it using the internal backups. -- Robin Bignall Herts, England |
#14
|
|||
|
|||
Win7 Backup Image Utility
On 11/23/2012 3:12 PM, Robin Bignall wrote:
On Fri, 23 Nov 2012 12:41:56 -0600, wrote: On 11/23/2012 10:38 AM, Robin Bignall wrote: On Fri, 23 Nov 2012 05:06:15 -0600, wrote: On 11/22/2012 9:07 PM, Jason wrote: On Thu, 22 Nov 2012 17:23:19 -0800 "Anthony Buckland" wrote in articleN- For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. I second that! Used it for years and it's saved my bacon a time or two. I've been burned by Acronis for many years. It will make backups all day long faithfully. When it comes to restoring, it can't see some USB drives that it had saved files on for years. And this is a known Acronis problem. And no other backup software has this major flaw. I have Shadowprotect, possibly the most expensive backup/recovery software. It will backup to anything writeable, but if you want to recover your system disk you have to boot from the SP stand-alone disk and that cannot see USB3 drives, as far as I can tell. Those boot up disks generally use Linux or WinPE as an OS just to run the application. And it sounds like whatever OS it is using, doesn't have the correct driver for USB3 ports. Yes, it's some sort of Windows: the Vista logo comes up while booting. Indeed, it does not have the USB3 drivers. But there's a function called 'Load drivers' that you can run before looking for backups, and which you can point to the USB3 drivers you need. I haven't got that to work because of my lack of knowledge of exactly what drivers I need for USB3. (This is the trouble, I feel, for complex pieces of software with lots of functions, that one uses once in a blue moon. I shall never, ever master Paintshop Pro for exactly the same reason!) SP is pretty clever, and will do a restore to quite different hardware if you choose. Instead of asking for a simple restore plus setting the target as bootable etc, you do an HIR (Hardware Independent) Restore. Somewhere you get to load the drivers for your new hardware, and the restore incorporates them. That works, because I've done it using the internal backups. Yes that disk is using WinPE v2. v1 has an XP logo and v3 uses a Windows 7 one. And WinPE usually always allows adding a driver. And two more backup utilities that I know of will also restore to totally different hardware. Acronis calls it "Restore to Dissimilar Hardware" Paragon calls it "Adaptive Restore" And it is pretty simple how they work. Basically they replace the drivers with generic drivers. The same drivers that Windows install uses. And the first time you boot Windows for real, Windows replaces them with the correct drivers. Now it is locked into that hardware. -- Bill Gateway M465e ('06 era) - Thunderbird v12 Centrino Core2 Duo T7400 2.16 GHz - 4GB - Windows 8 |
#15
|
|||
|
|||
Win7 Backup Image Utility
On Thu, 22 Nov 2012 17:23:19 -0800, Anthony Buckland wrote:
On 21/11/2012 10:03 PM, Remove the XX's wrote: I make backup inages via the tool that comes with Windows 7. My drive is 500GB (with 40GB currently on it) and the drive I put the image to is 60GB. Obviously each time I backup a new image to it the previous one is gone. But now for a destination drive I use a 320GB. The way I figure it I should get at LEAST 5 images on it but Windows keeps deleteing the previous one. If I split the destination drive into 5 partitions (320/5) and each time I back up use a different partition will those images have a good integrity for restore if needed? I would hate to have a false sense of security. TIA, Dennis ================== For years, I've used Acronis True Image, not just because I feel a sense of security, but because I have, more than once, actually restored a system with it. Your heart may dwell in your mouth, but there's nothing like actually having your computer saved. Disclosu I have no stake in their success. Further disclosu it costs money. I am a fan of the similar product Macrium Reflect, which can also be had in a less flexible free version. I've used EaseUS Todo Backup, which is free but, IIRC, is also available in a paid version. It works OK. Both of the above do image backups or clone backups, your choice. In fact I often[1] do one of each type. [1] Here, "often" means "a large percentage of backups"; I don't backup often enough :-) -- Gene E. Bloch (Stumbling Bloch) |
Thread Tools | |
Display Modes | Rate This Thread |
|
|