If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#361
|
|||
|
|||
Replace Mobo in XP??
Also be careful about not having any encrypted files or folders made
private. I remember that once I could not access my data after a new install because I had password. Or learn how to back up your encryption keys. "TT" wrote in message ... one_red_eye wrote: "jim" wrote in message ... I'd like to ask some questions about replacing/changing a mobo in an XP pro system. I've done some research on this issue and have come to the following conclusions. XP is not quite as Plug & Play as 98[SE] was in this regard. One can not just take the OS HD and put it in another box and expect it to boot and re-find everything and install all the appropriate drivers etc. like it would in 98SE. The limitations appear to be in two areas. The first is the HAL which is a function of the CPU and number thereof and presence/absence of ACPI mobo BIOS. The second is the HD drivers. I've found all sorts of site/articles regarding how to do this and fix these issues for the mobo ATA controller case. Other HD cases seem to be tractable using the F6 install drivers(SCSI technique). One that seems to be similar to many others regarding the mobo ATA HD issue is: www.mostlycreativeworkshop.com/article11.html My conclusion is that one should make the registry and file additions on any XP system so that failure recovery on new hardware is more convenient at a later time. Am I missing something here or is that about right. The second issue is that HAL. If the old and new systems are single CPU ACPI mobos then everything works. It makes no difference is one is a VIA chipset and Athlon and the other an Intel chipset and an Intel CPU. Do I have this right so far? If one is going from a single CPU case to a new P4 supporting HT then one must force in a new HAL for multiprocessor ACPI. Apparently that can be done in Recovery console or by putting the HD in another system where files may be manipulated before attempting a boot on the new mobo. Right so far? Are the above the only two issues? Will all the other gadgets and chipsets etc. be redetected and appropriate drivers installed? Will one be able to boot and move forward in most all cases if the above two issues are dealt with? Why not back up your data and reinstall on the new setup? If the old MB is bad, install your drive as a slave in another PC then backup. I agree-why all the extra headache when you could just either back up or install it as a slave or partition it first and dual boot?... |
Ads |
#362
|
|||
|
|||
Replace Mobo in XP??
jim wrote:
"wojo" wrote in message ... "Diogenes" wrote in message s.com... wojo wrote: "Diogenes" wrote in message s.com... jim wrote: "-Cryogenic-©" wrote in message ... Zknb wrote: Really? I have swapped quite a few motherboards with XP Pro. When XP restarted it detected all the new hardware and installed (or asked for) any new drivers that were needed. Never had a problem... And if it doesn't work (it doesn't always work), you resort to the "repair install" method. That's what we're all trying to tell the guy! Not all but just a few wackos unable to deal with the fact that an alternative does exist. Yes, I see all of your believers supporting you. Have you considered holding your breath and stomping your feet until someone agrees with you? What do you think will happen 1st? He'll pass out. Or his feet will get too sore to continue stomping. To him, it has become a Holy Grail. Surely his flock of followers will save him... before he loses consciousness. Let's hope he does in on the rim of Kilauea. Except so far I haven't seen any followers Except for the folks who report it works here for them and the web is full of more such folks and the "how to-s" so associated. Just the Liar. Cites. local fogger trolls are troubled and that's not surprising as they been telling folks that it can't be done. Such folks always go crackers when they are shown to have been blowing frags for sometime. Liar. They know far more workable methods to do things than do you. Such trolls always attack the poster rather than cite any real support for their debunked assertions. Liar. Only idiots (that would be you) get attacked. Notice how they form up into little troll packs. If one views their posting history in Google Groups then what they are becomes apparent. Liar. If you knew how to use Google Groups, you wouldn't have made such an absurd post in the first place. |
#363
|
|||
|
|||
Replace Mobo in XP??
Also be careful about not having any encrypted files or folders made
private. I remember that once I could not access my data after a new install because I had password. Or learn how to back up your encryption keys. "TT" wrote in message ... one_red_eye wrote: "jim" wrote in message ... I'd like to ask some questions about replacing/changing a mobo in an XP pro system. I've done some research on this issue and have come to the following conclusions. XP is not quite as Plug & Play as 98[SE] was in this regard. One can not just take the OS HD and put it in another box and expect it to boot and re-find everything and install all the appropriate drivers etc. like it would in 98SE. The limitations appear to be in two areas. The first is the HAL which is a function of the CPU and number thereof and presence/absence of ACPI mobo BIOS. The second is the HD drivers. I've found all sorts of site/articles regarding how to do this and fix these issues for the mobo ATA controller case. Other HD cases seem to be tractable using the F6 install drivers(SCSI technique). One that seems to be similar to many others regarding the mobo ATA HD issue is: www.mostlycreativeworkshop.com/article11.html My conclusion is that one should make the registry and file additions on any XP system so that failure recovery on new hardware is more convenient at a later time. Am I missing something here or is that about right. The second issue is that HAL. If the old and new systems are single CPU ACPI mobos then everything works. It makes no difference is one is a VIA chipset and Athlon and the other an Intel chipset and an Intel CPU. Do I have this right so far? If one is going from a single CPU case to a new P4 supporting HT then one must force in a new HAL for multiprocessor ACPI. Apparently that can be done in Recovery console or by putting the HD in another system where files may be manipulated before attempting a boot on the new mobo. Right so far? Are the above the only two issues? Will all the other gadgets and chipsets etc. be redetected and appropriate drivers installed? Will one be able to boot and move forward in most all cases if the above two issues are dealt with? Why not back up your data and reinstall on the new setup? If the old MB is bad, install your drive as a slave in another PC then backup. I agree-why all the extra headache when you could just either back up or install it as a slave or partition it first and dual boot?... |
#364
|
|||
|
|||
Replace Mobo in XP??
jim wrote:
"wojo" wrote in message ... "Diogenes" wrote in message s.com... wojo wrote: "Diogenes" wrote in message s.com... jim wrote: "-Cryogenic-©" wrote in message ... Zknb wrote: Really? I have swapped quite a few motherboards with XP Pro. When XP restarted it detected all the new hardware and installed (or asked for) any new drivers that were needed. Never had a problem... And if it doesn't work (it doesn't always work), you resort to the "repair install" method. That's what we're all trying to tell the guy! Not all but just a few wackos unable to deal with the fact that an alternative does exist. Yes, I see all of your believers supporting you. Have you considered holding your breath and stomping your feet until someone agrees with you? What do you think will happen 1st? He'll pass out. Or his feet will get too sore to continue stomping. To him, it has become a Holy Grail. Surely his flock of followers will save him... before he loses consciousness. Let's hope he does in on the rim of Kilauea. Except so far I haven't seen any followers Except for the folks who report it works here for them and the web is full of more such folks and the "how to-s" so associated. Just the Liar. Cites. local fogger trolls are troubled and that's not surprising as they been telling folks that it can't be done. Such folks always go crackers when they are shown to have been blowing frags for sometime. Liar. They know far more workable methods to do things than do you. Such trolls always attack the poster rather than cite any real support for their debunked assertions. Liar. Only idiots (that would be you) get attacked. Notice how they form up into little troll packs. If one views their posting history in Google Groups then what they are becomes apparent. Liar. If you knew how to use Google Groups, you wouldn't have made such an absurd post in the first place. |
#365
|
|||
|
|||
Replace Mobo in XP??
jim wrote:
"wojo" wrote in message ... "Diogenes" wrote in message s.com... wojo wrote: "Diogenes" wrote in message s.com... jim wrote: "-Cryogenic-©" wrote in message ... Zknb wrote: Really? I have swapped quite a few motherboards with XP Pro. When XP restarted it detected all the new hardware and installed (or asked for) any new drivers that were needed. Never had a problem... And if it doesn't work (it doesn't always work), you resort to the "repair install" method. That's what we're all trying to tell the guy! Not all but just a few wackos unable to deal with the fact that an alternative does exist. Yes, I see all of your believers supporting you. Have you considered holding your breath and stomping your feet until someone agrees with you? What do you think will happen 1st? He'll pass out. Or his feet will get too sore to continue stomping. To him, it has become a Holy Grail. Surely his flock of followers will save him... before he loses consciousness. Let's hope he does in on the rim of Kilauea. Except so far I haven't seen any followers Except for the folks who report it works here for them and the web is full of more such folks and the "how to-s" so associated. Just the Liar. Cites. local fogger trolls are troubled and that's not surprising as they been telling folks that it can't be done. Such folks always go crackers when they are shown to have been blowing frags for sometime. Liar. They know far more workable methods to do things than do you. Such trolls always attack the poster rather than cite any real support for their debunked assertions. Liar. Only idiots (that would be you) get attacked. Notice how they form up into little troll packs. If one views their posting history in Google Groups then what they are becomes apparent. Liar. If you knew how to use Google Groups, you wouldn't have made such an absurd post in the first place. |
#366
|
|||
|
|||
Replace Mobo in XP??
jim wrote:
"wojo" wrote in message ... "Diogenes" wrote in message s.com... wojo wrote: "Diogenes" wrote in message s.com... jim wrote: "-Cryogenic-©" wrote in message ... Zknb wrote: Really? I have swapped quite a few motherboards with XP Pro. When XP restarted it detected all the new hardware and installed (or asked for) any new drivers that were needed. Never had a problem... And if it doesn't work (it doesn't always work), you resort to the "repair install" method. That's what we're all trying to tell the guy! Not all but just a few wackos unable to deal with the fact that an alternative does exist. Yes, I see all of your believers supporting you. Have you considered holding your breath and stomping your feet until someone agrees with you? What do you think will happen 1st? He'll pass out. Or his feet will get too sore to continue stomping. To him, it has become a Holy Grail. Surely his flock of followers will save him... before he loses consciousness. Let's hope he does in on the rim of Kilauea. Except so far I haven't seen any followers Except for the folks who report it works here for them and the web is full of more such folks and the "how to-s" so associated. Just the Liar. Cites. local fogger trolls are troubled and that's not surprising as they been telling folks that it can't be done. Such folks always go crackers when they are shown to have been blowing frags for sometime. Liar. They know far more workable methods to do things than do you. Such trolls always attack the poster rather than cite any real support for their debunked assertions. Liar. Only idiots (that would be you) get attacked. Notice how they form up into little troll packs. If one views their posting history in Google Groups then what they are becomes apparent. Liar. If you knew how to use Google Groups, you wouldn't have made such an absurd post in the first place. |
#367
|
|||
|
|||
Replace Mobo in XP??
Hmmm ... I have been reading this thread trying to figure out what you are
trying to achieve but it seems you are only talking about a hardware swap in Win XP (home or pro makes no difference). If I had a whole day to swap hardware parts and tootoo with the OS, then yea, why not do it your way, would beat the hell out of having to check the same install screen between other tasks. But I think the guys here are working on the following premise : expediance and highest possibility for success. Change the hardware, reboot and test -working, excellent done! If not working next step Try reinstall over the top (aforementioned repair install) then test - working, great finished! If not working Slave back-up, clean, reinstall - not working Other issue, different job - tshoot accordingly Admin time ... about an hour or so spread over a day. Your way if it works may shave time off but it looks pretty prone for failure at the moment, so you spend about an hour or so working through the recovery console and the F6 driver install page, make it work ... nice job. Don't make it work ... start on the process above. This effectively doubles the admin time to complete a simple hardware swap. Hmmm ... let me see which I would go for ... 1 hour max or 2 plus hours. I think I would go for the hour at this stage, means I get more time to search for those elusive "Fix it all, forever" documents that I am sure someone has on the net. |
#368
|
|||
|
|||
Replace Mobo in XP??
Hmmm ... I have been reading this thread trying to figure out what you are
trying to achieve but it seems you are only talking about a hardware swap in Win XP (home or pro makes no difference). If I had a whole day to swap hardware parts and tootoo with the OS, then yea, why not do it your way, would beat the hell out of having to check the same install screen between other tasks. But I think the guys here are working on the following premise : expediance and highest possibility for success. Change the hardware, reboot and test -working, excellent done! If not working next step Try reinstall over the top (aforementioned repair install) then test - working, great finished! If not working Slave back-up, clean, reinstall - not working Other issue, different job - tshoot accordingly Admin time ... about an hour or so spread over a day. Your way if it works may shave time off but it looks pretty prone for failure at the moment, so you spend about an hour or so working through the recovery console and the F6 driver install page, make it work ... nice job. Don't make it work ... start on the process above. This effectively doubles the admin time to complete a simple hardware swap. Hmmm ... let me see which I would go for ... 1 hour max or 2 plus hours. I think I would go for the hour at this stage, means I get more time to search for those elusive "Fix it all, forever" documents that I am sure someone has on the net. |
#369
|
|||
|
|||
Replace Mobo in XP??
Hmmm ... I have been reading this thread trying to figure out what you are
trying to achieve but it seems you are only talking about a hardware swap in Win XP (home or pro makes no difference). If I had a whole day to swap hardware parts and tootoo with the OS, then yea, why not do it your way, would beat the hell out of having to check the same install screen between other tasks. But I think the guys here are working on the following premise : expediance and highest possibility for success. Change the hardware, reboot and test -working, excellent done! If not working next step Try reinstall over the top (aforementioned repair install) then test - working, great finished! If not working Slave back-up, clean, reinstall - not working Other issue, different job - tshoot accordingly Admin time ... about an hour or so spread over a day. Your way if it works may shave time off but it looks pretty prone for failure at the moment, so you spend about an hour or so working through the recovery console and the F6 driver install page, make it work ... nice job. Don't make it work ... start on the process above. This effectively doubles the admin time to complete a simple hardware swap. Hmmm ... let me see which I would go for ... 1 hour max or 2 plus hours. I think I would go for the hour at this stage, means I get more time to search for those elusive "Fix it all, forever" documents that I am sure someone has on the net. |
#370
|
|||
|
|||
Replace Mobo in XP??
relic wrote:
Kadaitcha Man wrote: Diogenes wrote: jim wrote: "-Cryogenic-©" wrote in message ... Zknb wrote: Really? I have swapped quite a few motherboards with XP Pro. When XP restarted it detected all the new hardware and installed (or asked for) any new drivers that were needed. Never had a problem... And if it doesn't work (it doesn't always work), you resort to the "repair install" method. That's what we're all trying to tell the guy! Not all but just a few wackos unable to deal with the fact that an alternative does exist. Yes, I see all of your believers supporting you. Have you considered holding your breath and stomping your feet until someone agrees with you? Maybe they're all confusing XP with win98. With all the ****e those turds spout, it' wouldn't be a surprise. Well, he did cross-post to the microsoft.public groups. Someone there will pick up on his thoery and start citing it as if it were bible. He also crossposted to 24hoursupport.helpdesk but it won't have any effect on the group repertoire at all. This is all 24hoursupport.helpdesk is good for... "Please learn to snip. No need to repeat the BS." "don't answer." "don't post the mp3 to the requests group" "don't jump in the middle of another thread" "don't start a new thread." "Please don't start new threads" "don't start a new thread" "don't post under the delimiter" "don't change the subject line" "don't reply after the ""." "don't change the subject line" "don't post the same message twice" "don't get frustrated." "don't start a new thread with the same question" "don't repost the same question an hour later." "don't start a new thread about the same problem(s)." "don't start your subject line with "Re"." "Don't post binaries to a non-binary newsgroup!" "DON'T start new messages about the same problem that you are working on" "don't put 'RE' in the subject line" "don't post the same message a second time." "don't post in all caps." "don't use HTLM in your sig." "don't put your reply after the """ "don't change the subject line" "don't start a new thread" "don't use HTML here." "don't start your subject line with 'Re'" "don't repost spam." "don't repost the HTML!!!!!" "don't repost your question again." "don't post again." "don't feed the troll." "DON'T post a binary to a non-binary group." "don't post with your Caps Lock key on." "don't use HTML in a plain text news group." "do you own the domain 'nowhere.com'? If not... the spam meant for you is going to this domain" "You are posting with a valid domain. "Invalid.com" Please don't do that. They are gettin spam meant for you." "unless you own the somewhere.com domain..... you are using someone anothers domain in your address. You should change it if that domain is not yours" "please use your very own domain" "You are still abusing a valid domain!" "All spam meant for you is going to that domain. You are abusing that domain!" "don't use a valid domain in your addy." "You are using their domain, in your address, without their permission." "Stop using a domain that is NOT yours!" "Quit using a valid domain name in your address" "Do Not abuse a valid domain" "Use an INVALID domain name!!!!!" "PLEASE use an INVALID domain!!!!! You don't own nothpole.org???" "The POINT IS that my-deja.com is a valid domain and YOU are using it!" "I can't help you but can suggest that ..." "I can't help you there." "Sorry I can't help" "I can't help with your problem but I can suggest ..." "Hi I don't use Agent. So I can't help but ..." "I don't know how OE works so I can't help you ..." "Sorry I can't help you with saving text and a graphic in Word." "Hi I can't help with your question but ..." "Sorry I can't help with "rules" if you use IE/OE" "I use Mozilla so I can't help you out." "Can't help you here. I Do Not like anything Norton." "I can't help with your problem. It may take a month until someone can answer you though." "I don't use ZA or AVG and can't help with your questions." "Not sure how RAM booster works. So I can't help you there." "Could you please adjust your Time Zone settings? You are posting from the future." "Could you please adjust your Time Zone settings? You are posting in the future." "And could you please adjust your Clock/Time Zone settings?" "Could you please adjust your Clock/Time Zone settings?" "Could you please adjust your Time Zone settings?" "Hello Could you please adjust your Clock/Time Zone settings?" "Hi Could you please adjust your Time Zone settings?" "Norman Could you please adjust your Time Zone settings?" "Spam report id 390702184 sent to: " "Spam report id 370272916 sent to: " "Spam report id 424845025 sent to: " -- http://kadaitcha.cx Windows XP Problem and Troubleshooting Resources a href="http://kadaitcha.cx"/a |
Thread Tools | |
Display Modes | |
|
|