A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Windows XP Help and Support
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Fast user switching after screen saver - problem



 
 
Thread Tools Display Modes
  #1  
Old April 5th 04, 01:26 PM
Eric
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem


I'm running XP Pro SP1. Fast user switching (FUS) works fine when I press
the "windows-L" key combination. However, when my screen saver is active and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric


Ads
  #2  
Old April 5th 04, 01:29 PM
Wesley Vogel
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Eric;

Have a look he
Lock Windows XP workstation with Welcome Screen and FUS enabled
http://www.mvps.org/sramesh2k/LockXP.htm

--
Hope this helps. Let us know.
Wes

In news:dVebc.60726$JO3.36619@attbi_s04,
Eric hunted and pecked:
I'm running XP Pro SP1. Fast user switching (FUS) works fine when I
press the "windows-L" key combination. However, when my screen saver
is active and I want to log back in, it reverts to the standard login
screen. It all worked fine up until a few days ago. I don't know what
changed

I have seen lots of articles on-line about FUS troubleshooting, but
none of them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric

  #3  
Old April 5th 04, 01:30 PM
Eric
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem


Interesting...

When I run LockXP, it says "Fast User Switching is currently enabled".
However, when I hit the "Lock Workstation" button, I get the standard (ie,
non-FUS) unlock dialog.




"Wesley Vogel" wrote in message
news:5rfbc.60011$K91.147786@attbi_s02...
Eric;

Have a look he
Lock Windows XP workstation with Welcome Screen and FUS enabled
http://www.mvps.org/sramesh2k/LockXP.htm

--
Hope this helps. Let us know.
Wes

In news:dVebc.60726$JO3.36619@attbi_s04,
Eric hunted and pecked:
I'm running XP Pro SP1. Fast user switching (FUS) works fine when I
press the "windows-L" key combination. However, when my screen saver
is active and I want to log back in, it reverts to the standard login
screen. It all worked fine up until a few days ago. I don't know what
changed

I have seen lots of articles on-line about FUS troubleshooting, but
none of them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric



  #4  
Old April 5th 04, 01:41 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric


  #5  
Old April 5th 04, 01:42 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Meanwhile, try this from Kellys Korner.

Line 161: On Resume, Display Welcome Screen=20
http://www.kellys-korner-xp.com/xp_tweaks.htm

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Ramesh [MVP]" wrote in message =
...
Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric
  #6  
Old April 5th 04, 02:03 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric


  #7  
Old April 5th 04, 02:03 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Meanwhile, try this from Kellys Korner.

Line 161: On Resume, Display Welcome Screen=20
http://www.kellys-korner-xp.com/xp_tweaks.htm

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Ramesh [MVP]" wrote in message =
...
Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric
  #8  
Old April 5th 04, 02:24 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric


  #9  
Old April 5th 04, 02:24 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Meanwhile, try this from Kellys Korner.

Line 161: On Resume, Display Welcome Screen=20
http://www.kellys-korner-xp.com/xp_tweaks.htm

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Ramesh [MVP]" wrote in message =
...
Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric
  #10  
Old April 5th 04, 02:43 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric


  #11  
Old April 5th 04, 02:43 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Meanwhile, try this from Kellys Korner.

Line 161: On Resume, Display Welcome Screen=20
http://www.kellys-korner-xp.com/xp_tweaks.htm

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Ramesh [MVP]" wrote in message =
...
Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric
  #12  
Old April 5th 04, 03:09 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric


  #13  
Old April 5th 04, 03:09 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Meanwhile, try this from Kellys Korner.

Line 161: On Resume, Display Welcome Screen=20
http://www.kellys-korner-xp.com/xp_tweaks.htm

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Ramesh [MVP]" wrote in message =
...
Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric
  #14  
Old April 5th 04, 03:32 PM
Eric
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Ramesh -

Thanks for the suggestion, but none of those registry values even exist on
my system:

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType - no
such value
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType -
no "system" key under "policies"
HKLM\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions - no such value
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMultiple
TSSessions - no "system" key under "policies"


Are they supposed to be string "1" or dword 1?




"Ramesh [MVP]" wrote in message
...
Interesting!

* On resume, password protect - Should appear only when FUS/Welcome Screen
is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMultiple
TSSessions

Check the above registry paths and post their values here. They all should
be one (with FUS/Welcome Screen enabled.)

--
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I press
the "windows-L" key combination. However, when my screen saver is active and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric



  #15  
Old April 5th 04, 03:34 PM
Ramesh [MVP]
external usenet poster
 
Posts: n/a
Default Fast user switching after screen saver - problem

Interesting!

* On resume, password protect - Should appear only when FUS/Welcome =
Screen is disabled.
[It actually shows "On resume, display welcome screen" with FUS/WS =
enabled]

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType
HKLM\SOFTWARE\Microsoft\Windows =
NT\CurrentVersion\Winlogon\AllowMultipleTSSessions
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti=
pleTSSessions

Check the above registry paths and post their values here. They all =
should be one (with FUS/Welcome Screen enabled.)

--=20
Ramesh - Microsoft MVP
Windows XP - Shell/User
www.mvps.org/sramesh2k
http://www.mvps.org/sramesh2k/Tips_Page.htm
http://www.mvps.org


"Eric" wrote in message =
news:dVebc.60726$JO3.36619@attbi_s04...

I'm running XP Pro SP1. Fast user switching (FUS) works fine when I =
press
the "windows-L" key combination. However, when my screen saver is active =
and
I want to log back in, it reverts to the standard login screen. It all
worked fine up until a few days ago. I don't know what changed

I have seen lots of articles on-line about FUS troubleshooting, but none =
of
them seem to apply:
* this system is not on a domain
* I haven't installed any software like Citrix that replaces the GINA =
DLL
* I have verified that the FUS service is enabled and running
* I have verified that "Use the Welcome Screen" and "Use Fast User
Switching" are enabled in the Users and Groups control panel
* I have verified that "On resume, password protect" is enabled in the
screen saver control panel

Any other ideas?

Thanks in advance.

-Eric


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 11:13 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.