If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
If you're a fan of Kingsoft Office, beware.
If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. |
Ads |
#2
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
On 10/02/2014 17:39, Juan Wei wrote:
If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! -- Cheers, Roger ____________ Please reply to Newsgroup. Whilst email address is valid, it is seldom checked. |
#3
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
Roger Mills has written on 2/10/2014 1:34 PM:
On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? |
#4
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
Juan Wei said on 2/10/2014 2:22 PM: Roger Mills has written on 2/10/2014 1:34 PM: On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? Hit a few returns and then up keys to get to the line, enter a lot of underscores and then hit down. |
#5
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
Juan Wei wrote:
Roger Mills has written on 2/10/2014 1:34 PM: On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? I suspect you're making a mountain out of a molehill. "Large flaw"? I don't think so. You could simply type a space after the last underscore and before the enter key. If having the space there bothers you, remove it (e.g. left-arrow backspace right-arrow). On a scale of one to ten for inconvenient workarounds, I'd score it at 1.5 maximum, unless there's something you're not telling us. -- Mike Barnes |
#6
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
Big Al has written on 2/10/2014 2:44 PM:
Juan Wei said on 2/10/2014 2:22 PM: Roger Mills has written on 2/10/2014 1:34 PM: On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? Hit a few returns and then up keys to get to the line, enter a lot of underscores and then hit down. As soon as I hit Enter/Return, the ________ changes to a Paragraph Border. I hit 5 Enter/Returns, the 5 up arrows and typed ___________ So now I have both the underscores and the para border! |
#7
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
Juan Wei said on 2/10/2014 3:08 PM: Big Al has written on 2/10/2014 2:44 PM: Juan Wei said on 2/10/2014 2:22 PM: Roger Mills has written on 2/10/2014 1:34 PM: On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? Hit a few returns and then up keys to get to the line, enter a lot of underscores and then hit down. As soon as I hit Enter/Return, the ________ changes to a Paragraph Border. I hit 5 Enter/Returns, the 5 up arrows and typed ___________ So now I have both the underscores and the para border! I didn't say type _________________________ and hit enter. Obviously you can't follow directions. |
#8
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
Big Al has written on 2/10/2014 3:15 PM:
Juan Wei said on 2/10/2014 3:08 PM: Big Al has written on 2/10/2014 2:44 PM: Juan Wei said on 2/10/2014 2:22 PM: Roger Mills has written on 2/10/2014 1:34 PM: On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? Hit a few returns and then up keys to get to the line, enter a lot of underscores and then hit down. As soon as I hit Enter/Return, the ________ changes to a Paragraph Border. I hit 5 Enter/Returns, the 5 up arrows and typed ___________ So now I have both the underscores and the para border! I didn't say type _________________________ and hit enter. Obviously you can't follow directions. Or you can't write them! I asked how can I continue editing the document (after adding ____________)? Kingsoft says don't hit Enter. I think you meant that if I want to have _____________ on a line, I have to enter a bunch of blank lines first and then backtrack. Let me try that. I see. You need only two Enters and one up arrow. For example, if I want Name: _____________________________ I have to type Name: [ENTER] [ENTER] Then move the cursor up to just after the space after Name: and now I can enter _______________. Somehow I think that typing Name: _______________________________[SPACE][ENTER] is a lot easier. But thanks anyway. Practice reading for comprehension. :-) |
#9
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
Mike Barnes has written on 2/10/2014 2:53 PM:
Juan Wei wrote: Roger Mills has written on 2/10/2014 1:34 PM: On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? I suspect you're making a mountain out of a molehill. "Large flaw"? I don't think so. You could simply type a space after the last underscore and before the enter key. Scroll back to just below the ================ If having the space there bothers you, remove it (e.g. left-arrow backspace right-arrow). On a scale of one to ten for inconvenient workarounds, I'd score it at 1.5 maximum, unless there's something you're not telling us. At my age, every trick I have to remember rates at least a 6. :-) I think it's unconscionable that any program does something automatically that you cannot reconfigure. |
#10
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
On Mon, 10 Feb 2014 12:39:59 -0500, Juan Wei
wrote in If you're a fan of Kingsoft Office, beware. Request a refund. -- I delete unread all messages posted through Google Groups. |
#11
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
On 10/02/2014 17:39, Juan Wei wrote:
If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. What version are you using? I tried this with my old Kingsoft Writer 8.1.0.3019 and couldn't replicate what you found. -- Jeff |
#12
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
Juan Wei wrote:
Mike Barnes has written on 2/10/2014 2:53 PM: Juan Wei wrote: Roger Mills has written on 2/10/2014 1:34 PM: On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? I suspect you're making a mountain out of a molehill. "Large flaw"? I don't think so. You could simply type a space after the last underscore and before the enter key. Scroll back to just below the ================ Yes, it's badly expressed to the point of being Just Plain Wrong, but a little bit of ingenuity goes a long way. If having the space there bothers you, remove it (e.g. left-arrow backspace right-arrow). On a scale of one to ten for inconvenient workarounds, I'd score it at 1.5 maximum, unless there's something you're not telling us. At my age, every trick I have to remember rates at least a 6. :-) I don't know how old that is but FWIW I'm in my late 60s. I think it's unconscionable that any program does something automatically that you cannot reconfigure. It's a bug. Most programs have them. -- Mike Barnes |
#13
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
On 2/10/2014, Juan Wei posted:
Big Al has written on 2/10/2014 3:15 PM: Juan Wei said on 2/10/2014 3:08 PM: Big Al has written on 2/10/2014 2:44 PM: Juan Wei said on 2/10/2014 2:22 PM: Roger Mills has written on 2/10/2014 1:34 PM: On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? Hit a few returns and then up keys to get to the line, enter a lot of underscores and then hit down. As soon as I hit Enter/Return, the ________ changes to a Paragraph Border. I hit 5 Enter/Returns, the 5 up arrows and typed ___________ So now I have both the underscores and the para border! I didn't say type _________________________ and hit enter. Obviously you can't follow directions. Or you can't write them! What Big Al wrote was perfectly clear to me. -- Gene E. Bloch (Stumbling Bloch) |
#14
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
On Mon, 10 Feb 2014 15:20:51 -0500, Juan Wei wrote:
Somehow I think that typing Name: _______________________________[SPACE][ENTER] is a lot easier. Doesn't it do underscore? Name: turn underscore on[spaces ]underscore off[ENTER] -- Faster, cheaper, quieter than HS2 and built in 5 years; UKUltraspeed http://www.500kmh.com/ |
#15
|
|||
|
|||
Large Flaw in Kingsoft Office Writer!
Juan Wei said on 2/10/2014 3:20 PM: Big Al has written on 2/10/2014 3:15 PM: Juan Wei said on 2/10/2014 3:08 PM: Big Al has written on 2/10/2014 2:44 PM: Juan Wei said on 2/10/2014 2:22 PM: Roger Mills has written on 2/10/2014 1:34 PM: On 10/02/2014 17:39, Juan Wei wrote: If you're a fan of Kingsoft Office, beware. If you type _________________________ and hit [Enter], your line of underscores will be transformed to a "paragraph border" -- a bold black line from margin to margin!!! Kingsoft Support says, "[T]he temporary workaround for this underline problem is not to press Enter key. "I have forwarded this problem to developers to see if there is a solution. When I get a reply, I will inform you. "Sorry that we do not support set 'no border' as default. We will consider adding this feature in the future." Don't press Enter!!!! Really???? ================ I did find a workaround. Type your line of underscores. Hit [Space] and then [Enter]. Doesn't sound life-threatening! Did I say it was life-threatening? And if I don't hit Enter, how can I continue editing the document? Hit a few returns and then up keys to get to the line, enter a lot of underscores and then hit down. As soon as I hit Enter/Return, the ________ changes to a Paragraph Border. I hit 5 Enter/Returns, the 5 up arrows and typed ___________ So now I have both the underscores and the para border! I didn't say type _________________________ and hit enter. Obviously you can't follow directions. Or you can't write them! I asked how can I continue editing the document (after adding ____________)? Kingsoft says don't hit Enter. I think you meant that if I want to have _____________ on a line, I have to enter a bunch of blank lines first and then backtrack. Let me try that. I see. You need only two Enters and one up arrow. For example, if I want Name: _____________________________ I have to type Name: [ENTER] [ENTER] Then move the cursor up to just after the space after Name: and now I can enter _______________. Somehow I think that typing Name: _______________________________[SPACE][ENTER] is a lot easier. But thanks anyway. Practice reading for comprehension. :-) I agree, the space is much simpler. |
Thread Tools | |
Display Modes | Rate This Thread |
|
|