If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Memory check?
Tied to run "mdsched.exe", get to "restart now to check for problems",
restarts to DOS type screen with "File:\EFI\Microsoft\Boot\memtest.efi missing or corrupt, use DVD to repair". Booting from DVD doesn't give me repair as an option, only reinstall. Used Memtest86 and RAM's OK but wondering why Win 10 memory check doesn't work and why it won't let me do a repair. It's an Acer laptop, clean install Win 10 using ISO from MS, Version 1511 (OS Build 10586.36), chipset, graphics etc. drivers up to date.. Kenny --- news://freenews.netfront.net/ - complaints: --- |
Ads |
#2
|
|||
|
|||
Memory check?
Kenny Cargill wrote:
Tied to run "mdsched.exe", get to "restart now to check for problems", restarts to DOS type screen with "File:\EFI\Microsoft\Boot\memtest.efi missing or corrupt, use DVD to repair". Booting from DVD doesn't give me repair as an option, only reinstall. Used Memtest86 and RAM's OK but wondering why Win 10 memory check doesn't work and why it won't let me do a repair. It's an Acer laptop, clean install Win 10 using ISO from MS, Version 1511 (OS Build 10586.36), chipset, graphics etc. drivers up to date.. Kenny You can find various articles on BCDEDIT. https://technet.microsoft.com/en-us/.../dn336950.aspx The configuration is stored in the BCD file. And just executing bcdedit can dump the configuration details. The part I don't understand, is where exactly is \EFI\Microsoft\Boot\memtest.efi Is that a BIOS chip file store, or is it on a hard disk partition ? In the article above there is a reference to \Boot\memtest.exe and that would be on the System Reserved partition (or in the \boot folder of C: if you moved the contents of System Reserved onto C: instead). You can certainly use memtest86+ (memtest.org) as a substitute, so your options are still open. But it would be nice to have all the pointers in your BCD working properly. You can see a Startup Repair option here. But I don't know if that will fix every possible situation. If the current setup cannot find memtest.efi, it's quite possible the Startup Repair won't find it either. http://www.tenforums.com/tutorials/2...dows-10-a.html The options are never-ending. http://www.tenforums.com/tutorials/5...lure-boot.html If this was my problem, I'd want to understand first why memtest.efi cannot be found, before doing anything else. It says here, if you had an EFI partition as such, it would be using a FAT file system. And since I don't have any GPT-partitioned disk setups here, I won't have an example of one of these here. https://en.wikipedia.org/wiki/EFI_System_partition Paul |
#3
|
|||
|
|||
Memory check?
I've got memtest.efi.mui, it has a double extension, in the normally hidden
32bit EFI partition. I initially clean installed Win 10 on a normal HDD then used Samsung software to transfer it to an SSD. I suspect problem has something to do with the way the original HDD was partitioned by Acer. Maybe formatting the SSD making sure I get rid of hidden partitions as well then reinstalling Win 10 may fix it but since it's working OK otherwise I'll leave it for now. It could also be a flaw with the Samsung Data Migration program. Kenny "Paul" wrote in message ... Kenny Cargill wrote: Tied to run "mdsched.exe", get to "restart now to check for problems", restarts to DOS type screen with "File:\EFI\Microsoft\Boot\memtest.efi missing or corrupt, use DVD to repair". Booting from DVD doesn't give me repair as an option, only reinstall. Used Memtest86 and RAM's OK but wondering why Win 10 memory check doesn't work and why it won't let me do a repair. It's an Acer laptop, clean install Win 10 using ISO from MS, Version 1511 (OS Build 10586.36), chipset, graphics etc. drivers up to date.. Kenny You can find various articles on BCDEDIT. https://technet.microsoft.com/en-us/.../dn336950.aspx The configuration is stored in the BCD file. And just executing bcdedit can dump the configuration details. The part I don't understand, is where exactly is \EFI\Microsoft\Boot\memtest.efi Is that a BIOS chip file store, or is it on a hard disk partition ? In the article above there is a reference to \Boot\memtest.exe and that would be on the System Reserved partition (or in the \boot folder of C: if you moved the contents of System Reserved onto C: instead). You can certainly use memtest86+ (memtest.org) as a substitute, so your options are still open. But it would be nice to have all the pointers in your BCD working properly. You can see a Startup Repair option here. But I don't know if that will fix every possible situation. If the current setup cannot find memtest.efi, it's quite possible the Startup Repair won't find it either. http://www.tenforums.com/tutorials/2...dows-10-a.html The options are never-ending. http://www.tenforums.com/tutorials/5...lure-boot.html If this was my problem, I'd want to understand first why memtest.efi cannot be found, before doing anything else. It says here, if you had an EFI partition as such, it would be using a FAT file system. And since I don't have any GPT-partitioned disk setups here, I won't have an example of one of these here. https://en.wikipedia.org/wiki/EFI_System_partition Paul --- news://freenews.netfront.net/ - complaints: --- |
Thread Tools | |
Display Modes | Rate This Thread |
|
|