If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
no outgoing Audio and Video
Hello,=20
i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not send a=20 picture or video. I have no firewall or router. can=20 somebody tell me please why it dosen=B4t work. Thanks for help |
Ads |
#2
|
|||
|
|||
no outgoing Audio and Video
Greetings,
I don't believe the problem is on your side, most likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not send a picture or video. I have no firewall or router. can somebody tell me please why it dosenīt work. Thanks for help |
#3
|
|||
|
|||
no outgoing Audio and Video
Jonathan,
Alot of people have with Intel nic cards have fixed this=20 problem by rolling back the driver. There is a problem=20 with intel nic cards and messenger that really needs to=20 be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most likely=20 since your contact isn't receiving you, something on their side is blocking it. Tell them=20 to do the following: Make sure that the Internet Connection Firewall hasn't=20 turned on, click Start, then click the Control Panel. If you're in category view=20 click Network and Internet connections then click Network Connections. Right click your=20 network/internet connection, then click Properties. Click the Advanced Tab, and verify that the=20 Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the=20 current port forwardings -- to do so, click Start, All Programs, Accessories, Communications,=20 Network Connections. Right-click the "Internet Gateway" (should be under the Internet Gateway=20 heading) and choose Properties. Choose the Settings button, click each 'msmsgs'=20 or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the=20 Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video=20 Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message=20 ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not send=20 a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . |
#4
|
|||
|
|||
no outgoing Audio and Video
Hi Richard,
The Intel NIC issue that you and others discovered in another thread is not the only cause of this problem. Realistically, the only way to get that fixed is to complain to Intel -- unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not send a picture or video. I have no firewall or router. can somebody tell me please why it dosenīt work. Thanks for help . |
#5
|
|||
|
|||
no outgoing Audio and Video
WEll the person that discovered the solution to the=20
problem-look back through the threads-said that he did=20 get his driver from windows update. And while it is not=20 the only cause of the problem I must say that every=20 person I have asked who have had the same symptoms-being=20 able to receive but not send audio and video-each one has=20 had an intel nic card. Most of the people complaining=20 aren;t even using firewalls or routers or are, like=20 myself, using a router but only having the problem on the=20 machine with the intel nic card. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in=20 another thread is not the only cause of this problem. Realistically, the only way to get that=20 fixed is to complain to Intel --=20 unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message=20 ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset=20 857, i get the incoming picture and Video, but i can not send a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . . |
#6
|
|||
|
|||
no outgoing Audio and Video
And I agree that it is not the only problem but so far=20
anyway, for every person complaining about these symptoms=20 who has an intel nic card rolling back the driver has=20 fixed it. =20 -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in=20 another thread is not the only cause of this problem. Realistically, the only way to get that=20 fixed is to complain to Intel --=20 unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message=20 ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset=20 857, i get the incoming picture and Video, but i can not send a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . . |
#7
|
|||
|
|||
no outgoing Audio and Video
And I like the "bad" reference. The fact is that they=20
are not "bad" they are BAD as in when you roll back the=20 driver the program them works. That is the definition of=20 BAD. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in=20 another thread is not the only cause of this problem. Realistically, the only way to get that=20 fixed is to complain to Intel --=20 unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message=20 ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset=20 857, i get the incoming picture and Video, but i can not send a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . . |
#8
|
|||
|
|||
no outgoing Audio and Video
If you can tell me the versions of the driver in question, as well as the
model of the card, I can have one of ours testers try to reproduce this. If it is causing an issue, we can work with Intel to fix it. -- John Holmes Developer, MSN Messenger This posting is provided "AS IS" with no warranties, and confers no rights. Please do not send e-mail directly to this alias. This alias is for newsgroup purposes only. "richard" wrote in message ... And I like the "bad" reference. The fact is that they are not "bad" they are BAD as in when you roll back the driver the program them works. That is the definition of BAD. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in another thread is not the only cause of this problem. Realistically, the only way to get that fixed is to complain to Intel -- unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not send a picture or video. I have no firewall or router. can somebody tell me please why it dosenīt work. Thanks for help . . |
#9
|
|||
|
|||
no outgoing Audio and Video
My motherboard is a D865 perl with an Intel Pro/1000 CT=20
on the board. It is using the latest available drivers=20 downloaded from intel's support website. I cannot roll=20 the driver back to a previous version cause windows says=20 no previous version exists for me. The machine is brand=20 new and I don't have a previous driver to roll it back=20 to. If you go back through these threads the last couple=20 days other people named their boards and nic cards as=20 well (all intel and all having the same problem). Those=20 people were able to correct it by rolling back the=20 driver. The problem we are all having is that we can=20 connect but the other side receives no voice or video. =20 In my case I am using a Upnp enabled router and two non- intel boards on my network can communicate with voice and=20 video with each other behind the router and to anyone=20 else outside the router so I know it has nothing to do=20 with my firewall/router as it is working properly for the=20 other two machines. =20 Thanks -----Original Message----- If you can tell me the versions of the driver in=20 question, as well as the model of the card, I can have one of ours testers try to=20 reproduce this. If it is causing an issue, we can work with Intel to fix it. --=20 John Holmes Developer, MSN Messenger This posting is provided "AS IS" with no warranties, and=20 confers no rights. Please do not send e-mail directly to this alias. This=20 alias is for newsgroup purposes only. "richard" wrote in message ... And I like the "bad" reference. The fact is that they are not "bad" they are BAD as in when you roll back the driver the program them works. That is the definition of BAD. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in another thread is not the only cause of this problem. Realistically, the only way to get that fixed is to complain to Intel --=20 unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most=20 likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet=20 Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning=20 Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not=20 send a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . . . |
#10
|
|||
|
|||
no outgoing Audio and Video
It is intel driver version 7.0.36.0 dated March 11, 2003=20
for intel Pro/100 and Pro/1000 nic cards. -----Original Message----- If you can tell me the versions of the driver in=20 question, as well as the model of the card, I can have one of ours testers try to=20 reproduce this. If it is causing an issue, we can work with Intel to fix it. --=20 John Holmes Developer, MSN Messenger This posting is provided "AS IS" with no warranties, and=20 confers no rights. Please do not send e-mail directly to this alias. This=20 alias is for newsgroup purposes only. "richard" wrote in message ... And I like the "bad" reference. The fact is that they are not "bad" they are BAD as in when you roll back the driver the program them works. That is the definition of BAD. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in another thread is not the only cause of this problem. Realistically, the only way to get that fixed is to complain to Intel --=20 unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most=20 likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet=20 Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning=20 Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not=20 send a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . . . |
#11
|
|||
|
|||
no outgoing Audio and Video
I posted this in an older thread.
I just disabled my onboard Intel NIC and installed a=20 RealTek. I now have audio/video. Intel better fix=20 this! I was unable to roll back the drivers since the=20 original drivers that came with the board didn't work in=20 the first place and updating them to the ones they were=20 on the net didn't fix the problem either. So rolling=20 back the drivers was not an option for me. But it's working now with this NIC. I'll be watching=20 Intel's web site to see if they update their drivers=20 anytime soon. I better not hold my breath. My motherboard: D875PBZ (onboard lan Intel Pro/1000 CT) -----Original Message----- If you can tell me the versions of the driver in=20 question, as well as the model of the card, I can have one of ours testers try to=20 reproduce this. If it is causing an issue, we can work with Intel to fix it. --=20 John Holmes Developer, MSN Messenger This posting is provided "AS IS" with no warranties, and=20 confers no rights. Please do not send e-mail directly to this alias. This=20 alias is for newsgroup purposes only. "richard" wrote in message ... And I like the "bad" reference. The fact is that they are not "bad" they are BAD as in when you roll back the driver the program them works. That is the definition of BAD. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in another thread is not the only cause of this problem. Realistically, the only way to get that fixed is to complain to Intel --=20 unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most=20 likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet=20 Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning=20 Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not=20 send a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . . . |
#12
|
|||
|
|||
no outgoing Audio and Video
Thanks James
-----Original Message----- I posted this in an older thread. I just disabled my onboard Intel NIC and installed a=20 RealTek. I now have audio/video. Intel better fix=20 this! I was unable to roll back the drivers since the=20 original drivers that came with the board didn't work in=20 the first place and updating them to the ones they were=20 on the net didn't fix the problem either. So rolling=20 back the drivers was not an option for me. But it's working now with this NIC. I'll be watching=20 Intel's web site to see if they update their drivers=20 anytime soon. I better not hold my breath. My motherboard: D875PBZ (onboard lan Intel Pro/1000 CT) -----Original Message----- If you can tell me the versions of the driver in=20 question, as well as the model of the card, I can have one of ours testers try=20 to=20 reproduce this. If it is causing an issue, we can work with Intel to fix=20 it. --=20 John Holmes Developer, MSN Messenger This posting is provided "AS IS" with no warranties,=20 and=20 confers no rights. Please do not send e-mail directly to this alias. This=20 alias is for newsgroup purposes only. "richard" wrote in message ... And I like the "bad" reference. The fact is that they are not "bad" they are BAD as in when you roll back the driver the program them works. That is the definition=20 of BAD. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in another thread is not the only cause of this problem. Realistically, the only way to get that fixed is to complain to Intel --=20 unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message ... Jonathan, Alot of people have with Intel nic cards have fixed=20 this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most=20 likely since your contact isn't receiving you, something on their side is blocking it. Tell=20 them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that=20 the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories,=20 Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet=20 Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the=20 Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning=20 Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message .. . Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not=20 send a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . . . . |
#13
|
|||
|
|||
no outgoing Audio and Video
Dear Mr. Holmes,=20
i have tried a lot of solution, and i think that it is=20 the nic card, here is the card Intel pro 10/100VE and the=20 driver is 7.06.26.0, if you can fix the problem, could=20 you please contact me or post it in the newsgroup -----Original Message----- If you can tell me the versions of the driver in=20 question, as well as the model of the card, I can have one of ours testers try to=20 reproduce this. If it is causing an issue, we can work with Intel to fix it. --=20 John Holmes Developer, MSN Messenger This posting is provided "AS IS" with no warranties, and=20 confers no rights. Please do not send e-mail directly to this alias. This=20 alias is for newsgroup purposes only. "richard" wrote in message ... And I like the "bad" reference. The fact is that they are not "bad" they are BAD as in when you roll back the driver the program them works. That is the definition of BAD. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in another thread is not the only cause of this problem. Realistically, the only way to get that fixed is to complain to Intel --=20 unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most=20 likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet=20 Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning=20 Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not=20 send a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . . . |
#14
|
|||
|
|||
no outgoing Audio and Video
I appears that everyone I have found so far having the=20
problem has 845-875 chipsets with intel pro/100 and=20 pro/1000 nic cards built onto the boards. People have=20 replaced the boards and disabled the onboard nic card or=20 rolled back the driver and restored audio and video. -----Original Message----- If you can tell me the versions of the driver in=20 question, as well as the model of the card, I can have one of ours testers try to=20 reproduce this. If it is causing an issue, we can work with Intel to fix it. --=20 John Holmes Developer, MSN Messenger This posting is provided "AS IS" with no warranties, and=20 confers no rights. Please do not send e-mail directly to this alias. This=20 alias is for newsgroup purposes only. "richard" wrote in message ... And I like the "bad" reference. The fact is that they are not "bad" they are BAD as in when you roll back the driver the program them works. That is the definition of BAD. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in another thread is not the only cause of this problem. Realistically, the only way to get that fixed is to complain to Intel --=20 unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most=20 likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet=20 Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning=20 Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not=20 send a picture or video. I have no firewall or router. can somebody tell me please why it dosen=B4t work. Thanks for help . . . |
#15
|
|||
|
|||
no outgoing Audio and Video
i hav intel D845pebt2 mouther board, intel pro 10/100VE on board using
driver 6.4.14.0 date 9/25/2002 no probiem here "richard" wrote in message ... I appears that everyone I have found so far having the problem has 845-875 chipsets with intel pro/100 and pro/1000 nic cards built onto the boards. People have replaced the boards and disabled the onboard nic card or rolled back the driver and restored audio and video. -----Original Message----- If you can tell me the versions of the driver in question, as well as the model of the card, I can have one of ours testers try to reproduce this. If it is causing an issue, we can work with Intel to fix it. -- John Holmes Developer, MSN Messenger This posting is provided "AS IS" with no warranties, and confers no rights. Please do not send e-mail directly to this alias. This alias is for newsgroup purposes only. "richard" wrote in message ... And I like the "bad" reference. The fact is that they are not "bad" they are BAD as in when you roll back the driver the program them works. That is the definition of BAD. -----Original Message----- Hi Richard, The Intel NIC issue that you and others discovered in another thread is not the only cause of this problem. Realistically, the only way to get that fixed is to complain to Intel -- unless these "bad" drivers are on WindowsUpdate... ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "richard" wrote in message ... Jonathan, Alot of people have with Intel nic cards have fixed this problem by rolling back the driver. There is a problem with intel nic cards and messenger that really needs to be addressed. -----Original Message----- Greetings, I don't believe the problem is on your side, most likely since your contact isn't receiving you, something on their side is blocking it. Tell them to do the following: Make sure that the Internet Connection Firewall hasn't turned on, click Start, then click the Control Panel. If you're in category view click Network and Internet connections then click Network Connections. Right click your network/internet connection, then click Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is unchecked. If you're using a router (UPnP enabled), remove the current port forwardings -- to do so, click Start, All Programs, Accessories, Communications, Network Connections. Right-click the "Internet Gateway" (should be under the Internet Gateway heading) and choose Properties. Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete' to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart Messenger and try a voice/video conversation again. Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu in the main Messenger window, then Audio Tuning Wizard). ____________________________________________ Jonathan Kay Windows MVP, Messenger Associate Expert http://www.microsoft.com/windowsxp/expertzone/ Messenger Resources - http://messenger.jonathankay.com "cumi" wrote in message ... Hello, i have a dell dimension 8300 with the newest chipset 857, i get the incoming picture and Video, but i can not send a picture or video. I have no firewall or router. can somebody tell me please why it dosenīt work. Thanks for help . . . |
Thread Tools | |
Display Modes | |
|
|