If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Cant' download SP2 to save.
Every time I try to download SP2 to save to a CD (from the MS site) it
starts out as a slow 80 kb and trickles off to 40 KBs, then stops altogether. I have Satellite download and this should download in a few minutes - not hours! How is this downloaded to save? FS~ |
Ads |
#2
|
|||
|
|||
Try R.clicking on the button,select "save as".You can also order the
cd,"free" from microsoft. "~ FreeSpirit ~" wrote: Every time I try to download SP2 to save to a CD (from the MS site) it starts out as a slow 80 kb and trickles off to 40 KBs, then stops altogether. I have Satellite download and this should download in a few minutes - not hours! How is this downloaded to save? FS~ |
#3
|
|||
|
|||
"Andrew E." wrote in message ... Try R.clicking on the button,select "save as". ## Thanks. Yes, that's what I did. I tried 3 times now and each time it trailed off to nothing. :-( You can also order the cd,"free" from microsoft. ## I had hoped I could just download it, burn it to a CD and save it. FS~ "~ FreeSpirit ~" wrote: Every time I try to download SP2 to save to a CD (from the MS site) it starts out as a slow 80 kb and trickles off to 40 KBs, then stops altogether. I have Satellite download and this should download in a few minutes - not hours! How is this downloaded to save? FS~ |
#4
|
|||
|
|||
~ FreeSpirit ~ wrote:
Every time I try to download SP2 to save to a CD (from the MS site) it starts out as a slow 80 kb and trickles off to 40 KBs, then stops altogether. I have Satellite download and this should download in a few minutes - not hours! How is this downloaded to save? Andrew E. wrote Try R.clicking on the button,select "save as". You can also order the cd,"free" from microsoft. ~ FreeSpirit ~ wrote: Thanks. Yes, that's what I did. I tried 3 times now and each time it trailed off to nothing. :-( I had hoped I could just download it, burn it to a CD and save it. Where are you downloading it from? Direct Download of Service Pack 2 (SP2) for Windows XP http://snipurl.com/8bqy Order the Free Windows XP SP2 CD http://snipurl.com/8umo What browser are you using to download it? Do you have any "download accelerators" or "Internet accelerators" installed? I just tried and stayed consistently above 630KB/sec. So it is not Microsoft but your provider or some hop between yourself and Microsoft could be having trouble. What does a TRACERT to download.microsoft.com give you? I never got anything above 107ms and it was only 8 hops. -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#5
|
|||
|
|||
"Shenan Stanley" wrote in message ... ~ FreeSpirit ~ wrote: Every time I try to download SP2 to save to a CD (from the MS site) it starts out as a slow 80 kb and trickles off to 40 KBs, then stops altogether. I have Satellite download and this should download in a few minutes - not hours! How is this downloaded to save? Andrew E. wrote Try R.clicking on the button,select "save as". You can also order the cd,"free" from microsoft. ~ FreeSpirit ~ wrote: Thanks. Yes, that's what I did. I tried 3 times now and each time it trailed off to nothing. :-( I had hoped I could just download it, burn it to a CD and save it. Where are you downloading it from? Direct Download of Service Pack 2 (SP2) for Windows XP http://snipurl.com/8bqy ## I can't get to Sp2 downloads page again to give you the URL. Now I keep getting a page that says "Try Microsoft Update Today" when I search for the Sp2 download. Order the Free Windows XP SP2 CD http://snipurl.com/8umo ## That's what I just did. However I had time tonight to download and burn it to a CD rather than wait 4 to 6 weeks for it to arrive. I did finally order it from MS - a few minutes ago. Now I can't even find/get to the download page. What browser are you using to download it? ## IE6. Do you have any "download accelerators" or "Internet accelerators" installed? ## No because my Satellite (Direcway) is so fast. None are needed. I just tried and stayed consistently above 630KB/sec. ## It started at about 100KB/sec which rapidly dropped off to 40 or less,... then it stops altogether. So it is not Microsoft but your provider or some hop between yourself and Microsoft could be having trouble. ## This is possible. However, now I can't get to a Sp2 download page........ I keep getting routed back to the "Try Microsoft Update Today" when I search for the Sp2 download. What does a TRACERT to download.microsoft.com give you? ## What is a TRACERT? I never got anything above 107ms and it was only 8 hops. ## 107ms? 8 hops? FS~ -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#6
|
|||
|
|||
~ FreeSpirit ~ wrote:
Every time I try to download SP2 to save to a CD (from the MS site) it starts out as a slow 80 kb and trickles off to 40 KBs, then stops altogether. I have Satellite download and this should download in a few minutes - not hours! How is this downloaded to save? Andrew E. wrote Try R.clicking on the button,select "save as". You can also order the cd,"free" from microsoft. ~ FreeSpirit ~ wrote: Thanks. Yes, that's what I did. I tried 3 times now and each time it trailed off to nothing. :-( I had hoped I could just download it, burn it to a CD and save it. Shenan Stanley wrote: Where are you downloading it from? Direct Download of Service Pack 2 (SP2) for Windows XP http://snipurl.com/8bqy Order the Free Windows XP SP2 CD http://snipurl.com/8umo What browser are you using to download it? Do you have any "download accelerators" or "Internet accelerators" installed? I just tried and stayed consistently above 630KB/sec. So it is not Microsoft but your provider or some hop between yourself and Microsoft could be having trouble. What does a TRACERT to download.microsoft.com give you? I never got anything above 107ms and it was only 8 hops. ~ FreeSpirit ~ wrote: I can't get to Sp2 downloads page again to give you the URL. Now I keep getting a page that says "Try Microsoft Update Today" when I search for the Sp2 download. (as for the Ordering of a CD..) That's what I just did. However I had time tonight to download and burn it to a CD rather than wait 4 to 6 weeks for it to arrive. I did finally order it from MS - a few minutes ago. Now I can't even find/get to the download page. Using IE6. No (accellerators) because my Satellite (Direcway) is so fast. None are needed. It started at about 100KB/sec which rapidly dropped off to 40 or less,... then it stops altogether. This is possible. However, now I can't get to a Sp2 download page........ I keep getting routed back to the "Try Microsoft Update Today" when I search for the Sp2 download. What is a TRACERT? 107ms? 8 hops? You realize I gave you the direct link to the download for SP2 above, right? http://snipurl.com/8bqy If it started at 100KB, that's "marginally fast", but good enough I guess. heh TRACERT.. You could have found this information on your own machine and/or using a GOOGLE search. Start button -- Help and Support -- search for: TRACERT (It is shortened version of "Trace Route", or tracing the route you go through to get to a site from your computer. It tells you how long it takes to get from each hop to the next - since you "hop" from your computer to the first router, from the first router to the next and so on until you reach your destination.) To trace a path by using the tracert command - Open Command Prompt, and type the following: tracert host_name (replace host_name appropriately.) Or, type tracert ip_address (replace ip_address appropriately) where host_name or ip_address is the host name or IP address, respectively, of the remote computer. For example, to trace a connection route from this computer to www.microsoft.com, type the following at a command prompt: tracert www.microsoft.com If you do not want the tracert command to resolve and display the names of all routers in the path, use the -d parameter. This expedites the display of the path. For example, to trace a path from this computer to www.microsoft.com without displaying the router names, type the following at a command prompt: tracert -d www.microsoft.com * Notes - To open a command prompt, click Start, point to All Programs, point to Accessories, and then click Command Prompt. - The tracert command traces the path by sending Internet Control Message Protocol (ICMP) Echo Request and Echo Reply messages (similar to the ping command) to produce command-line report output about each router that is crossed and the roundtrip time (RTT) for each hop. Packet filtering policies on routers, firewalls, or other types of security gateways might prevent the forwarding of this traffic. - If tracert is unsuccessful, you can use the command output to help determine at which intermediate router forwarding failed or was slowed. Search using Google! http://www.google.com/ (How-to: http://www.google.com/intl/en/help/basics.html ) Essentially, my tracert showed "download.microsoft.com" to be only 8 hops aways, with the largest delay from one router to the next of 107 milliseconds(ms). -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#7
|
|||
|
|||
On Thu, 11 Aug 2005 00:32:47 -0500, "~ FreeSpirit ~"
wrote: Every time I try to download SP2 to save to a CD (from the MS site) it starts out as a slow 80 kb and trickles off to 40 KBs, then stops altogether. I have Satellite download and this should download in a few minutes - not hours! How is this downloaded to save? FS~ Hi I had a very similar problem on a network PC when uploading to my Websites or using FTP Upload via remote access also sending large e mail files sometimes failed. Tried for ages to fix it but never managed it, still don't know why. Uploads started at 56Ks and went down to zip in under 30 seconds - not always but a good 50% of the time. Since I could work around it I did not really chase it down too hard I just used other machines and it became a backup server for a while. Eventually I re-installed the PCs XP installation after a MOBO failiure / replacement and the problem vanished which led me to suspect it was hardware related - but maybe not? Jonah |
#8
|
|||
|
|||
"Shenan Stanley" wrote in message ... ~ FreeSpirit ~ wrote: Every time I try to download SP2 to save to a CD (from the MS site) it starts out as a slow 80 kb and trickles off to 40 KBs, then stops altogether. I have Satellite download and this should download in a few minutes - not hours! How is this downloaded to save? Andrew E. wrote Try R.clicking on the button,select "save as". You can also order the cd,"free" from microsoft. ~ FreeSpirit ~ wrote: Thanks. Yes, that's what I did. I tried 3 times now and each time it trailed off to nothing. :-( I had hoped I could just download it, burn it to a CD and save it. Where are you downloading it from? Direct Download of Service Pack 2 (SP2) for Windows XP http://snipurl.com/8bqy Order the Free Windows XP SP2 CD http://snipurl.com/8umo ============================ I sent for the CD from MS and it arrived in a few days. Thanks FS~ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sp2 download | mamoose | Windows XP Help and Support | 0 | November 18th 04 07:49 PM |
SP2 Boot failure, system freeze, AGPCPQ.SYS, AGP440.SYS lock-ups. | Trebor | Windows Service Pack 2 | 2 | October 19th 04 07:55 PM |
SP2 Boot failure, system freeze, AGPCPQ.SYS, AGP440.SYS lock-ups. | Trebor | Windows XP Help and Support | 0 | October 19th 04 07:35 PM |
after Win SP2 install file download problem | Rasuds | Windows Service Pack 2 | 3 | September 5th 04 12:45 PM |
How Do I Reset My Machine to Download XP SP2 After Denying It During Upgrade | [email protected] | Windows Service Pack 2 | 1 | August 26th 04 04:50 AM |