A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » The Basics
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

XP System32 Drivers Question Please



 
 
Thread Tools Display Modes
  #1  
Old February 24th 05, 11:20 PM
Dudley Henriques
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

I understand that the driver files that XP uses for my Samsung CDRW are
located in the Windows/ system32/drivers folder.
I think my driver folder might be corrupted by some InCD files left in
it after an uninstall of InCD. Can I delete the entire system32 driver
folder and will XP rebuild it fresh on a reboot? I sure don't want to do
this if XP doesn't rebuild this folder :-) But if it does, doing this
might solve an issue for me with my CDRW drive by giving me a pristine
driver folder so that I can then uninstall the device, have XP recognize
it on reboot and reinstall the default driver.
Reason I'm considering doing this is that there is an InCD file showing
(InCDPass.sys) in my XP driver files for the CDRW when pulled up in
device manager. I am having some issues, but I have no way of knowing if
this file is the culprit or not. There are 3 InCD files in the system32
driver folder (InCDfs) (InCDPass) and (InCDrec). Only InCDPass is
showing up in device manager for the drive.
Also, if some kind soul with a Samsung CDRW would look and tell me if
there is an InCDPass file in their device manager for their drive, that
would help a lot also.
Note; already did a system restore. What I need to know really is
whether these InCD files should be there, and if not, how to get a
pristine driver folder again in XP?
Thanks much,
Dudley



Ads
  #2  
Old February 25th 05, 12:23 AM
Mickey
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

Dudley,

This is my driver list in Device Manager:

SAMSUNG CD-R/RW SW-252S:

C:\WINDOWS\system32\DRIVERS\cdrom.sys
C:\WINDOWS\system32\DRIVERS\imapi.sys
C:\WINDOWS\system32\DRIVERS\redbook.sys
C:\WINDOWS\system32\storprop.dll

Have you tried just deleting the InCD file in that folder to see if it
solves your issue?

As far as deleting the entire folder? I would not, yet. Let me research this
and I'll get back to you.

Good Luck,
Mickey


  #3  
Old February 25th 05, 12:37 AM
Mickey
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

Dudley,

C:\WINDOWS\system32\drivers
Ah. This is a tricky one,

This is a list of what I believe are universal drivers used on most
systems...and which I keep on my

system...USUALLY BECAUSE MY SYSTEM WILL NOT BOOT...which seems like a fairly
good reason,

don't you think:

ACPI.sys
AEC.SYS
AFD.SYS
atapi.sys
AUDSTUB.SYS
BEEP.SYS
CDAUDIO.SYS
Cdfs.sys
CDROM.SYS
CLASSPNP.SYS
disk.sys
DMUSIC.SYS
DRMK.SYS
DRMKAUD.SYS
DXAPI.SYS
DXG.SYS
DXGTHK.SYS
FDC.SYS
FIPS.SYS
FLPYDISK.SYS
FS_REC.SYS
GAMEENUM.SYS
IMAPI.SYS
IPSEC.SYS
isapnp.sys
KBDCLASS.SYS
KMIXER.SYS
KS.SYS
MNMDD.SYS
MODEM.SYS
MODEMCSA.SYS
MOUCLASS.SYS
MountMgr.sys
Msfs.sys
MSGPC.SYS
Mup.sys
NDIS.sys
NDISTAPI.SYS
NDISWAN.SYS
NDPROXY.SYS
NETBT.SYS
Npfs.sys
Ntfs.sys
NULL.SYS
PARPORT.SYS
PartMgr.sys
PARVDM.SYS
pci.sys
PCIIDEX.SYS
PTILINK.SYS
RASACD.SYS
RASL2TP.SYS
RASPPPOE.SYS
RASPPTP.SYS
RASPTI.SYS
RDPCDD.SYS
REDBOOK.SYS
SCSIPORT.SYS
SERENUM.SYS
SERIAL.SYS
SFLOPPY.SYS
SPLITTER.SYS
SWENUM.SYS
SWMIDI.SYS
SYSAUDIO.SYS
TCPIP.SYS
TDI.SYS
TERMDD.SYS
UPDATE.SYS
USBD.SYS
USBHUB.SYS
USBPORT.SYS
USBUHCI.SYS
VGA.SYS
VIDEOPRT.SYS
VolSnap.sys
WANARP.SYS
WDMAUD.SYS
WMILIB.SYS

I also need these drivers, and I am fairly

certain that these, we almost all need on our systems:

asyncmac.sys
ctlfacem.sys
ctljystk.sys
dmio.sys
dmload.sys
emu10k1m.sys
mrxsmb.sys
MSPCLOCK.sys
MSPQM.sys
netbios.sys
processr.sys
psched.sys
rdbss.sys
rdpdr.sys
sfmanm.sys
stream.sys



  #4  
Old February 25th 05, 01:22 AM
Dudley Henriques
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

Hi Mickey;

I'm about ready to give up on this thing :-) I uninstalled InCD finally
after having nothing but trouble with it's formatting crashing the
computer. Now I'm just trying to use XP's default drivers for the CDRW.
It's an (SM-352B)
My driver details in DM are exactly as yours are with the exception of
the one InCD file (InCDPass.sys). I've tried every which way but loose
to get rid of it and reload the CDRW with the InCD file out of there,
but it's a no go. If I take the file out of the system32 drivers folder
and put it on the desktop, then uninstall the CDRW in DM and reboot, XP
recognizes the CDRW but won't install the drivers. The CDRW shows a
yellow bang in DM every time I try it. XP simply won't accept the driver
without that InCDPASS.sys being in the system32 driver folder. If I put
the file back in the folder and uninstall the CDRW and reboot, the
driver installs with the InCD file in it.
I guess I could just leave well enough alone, but I've been down this
route before with these things. What usually happens is a conflict down
the line somewhere :-)
If you think of anything, let me know will ya. Appreciate it!! :-)
Dudley
"Mickey" wrote in message
...
Dudley,

This is my driver list in Device Manager:

SAMSUNG CD-R/RW SW-252S:

C:\WINDOWS\system32\DRIVERS\cdrom.sys
C:\WINDOWS\system32\DRIVERS\imapi.sys
C:\WINDOWS\system32\DRIVERS\redbook.sys
C:\WINDOWS\system32\storprop.dll

Have you tried just deleting the InCD file in that folder to see if it
solves your issue?

As far as deleting the entire folder? I would not, yet. Let me
research this and I'll get back to you.

Good Luck,
Mickey



  #5  
Old February 25th 05, 01:25 AM
Dudley Henriques
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

Thanks. I've printed this out for reference.
D
"Mickey" wrote in message
...
Dudley,

C:\WINDOWS\system32\drivers
Ah. This is a tricky one,

This is a list of what I believe are universal drivers used on most
systems...and which I keep on my

system...USUALLY BECAUSE MY SYSTEM WILL NOT BOOT...which seems like a
fairly good reason,

don't you think:

ACPI.sys
AEC.SYS
AFD.SYS
atapi.sys
AUDSTUB.SYS
BEEP.SYS
CDAUDIO.SYS
Cdfs.sys
CDROM.SYS
CLASSPNP.SYS
disk.sys
DMUSIC.SYS
DRMK.SYS
DRMKAUD.SYS
DXAPI.SYS
DXG.SYS
DXGTHK.SYS
FDC.SYS
FIPS.SYS
FLPYDISK.SYS
FS_REC.SYS
GAMEENUM.SYS
IMAPI.SYS
IPSEC.SYS
isapnp.sys
KBDCLASS.SYS
KMIXER.SYS
KS.SYS
MNMDD.SYS
MODEM.SYS
MODEMCSA.SYS
MOUCLASS.SYS
MountMgr.sys
Msfs.sys
MSGPC.SYS
Mup.sys
NDIS.sys
NDISTAPI.SYS
NDISWAN.SYS
NDPROXY.SYS
NETBT.SYS
Npfs.sys
Ntfs.sys
NULL.SYS
PARPORT.SYS
PartMgr.sys
PARVDM.SYS
pci.sys
PCIIDEX.SYS
PTILINK.SYS
RASACD.SYS
RASL2TP.SYS
RASPPPOE.SYS
RASPPTP.SYS
RASPTI.SYS
RDPCDD.SYS
REDBOOK.SYS
SCSIPORT.SYS
SERENUM.SYS
SERIAL.SYS
SFLOPPY.SYS
SPLITTER.SYS
SWENUM.SYS
SWMIDI.SYS
SYSAUDIO.SYS
TCPIP.SYS
TDI.SYS
TERMDD.SYS
UPDATE.SYS
USBD.SYS
USBHUB.SYS
USBPORT.SYS
USBUHCI.SYS
VGA.SYS
VIDEOPRT.SYS
VolSnap.sys
WANARP.SYS
WDMAUD.SYS
WMILIB.SYS

I also need these drivers, and I am fairly

certain that these, we almost all need on our systems:

asyncmac.sys
ctlfacem.sys
ctljystk.sys
dmio.sys
dmload.sys
emu10k1m.sys
mrxsmb.sys
MSPCLOCK.sys
MSPQM.sys
netbios.sys
processr.sys
psched.sys
rdbss.sys
rdpdr.sys
sfmanm.sys
stream.sys





  #6  
Old February 25th 05, 01:34 AM
Mickey
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

Dudley,

Have you opened DM and under "Drivers", Update Driver or Rollback Driver, or
Uninstall Driver, than Reboot?

I'm still researching other avenues for you.

Don't delete any folders within C:\Windows, not a good idea, We will figure
it out together.

Mickey


  #7  
Old February 25th 05, 01:59 AM
Mickey
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

Dudley,
Try this: I obtained this information from your CDRW Manual on
www.samsung.com.

Setting Up the Device Driver

Automatic Setup

The device driver is located in the Ddriver folder of the CD Record Utility
disc which is provided in the package.

Insert the CD Record Utility disc into the CD-ROM drive and open the Ddriver
folder.

Run the CDSETUP.EXE file in the Ddriver folder.

When Setup is successfully completed, click OK button or press the Enter
key.

Reboot the computer.



Manual Setup

Make the C:\SAMSUNG directory.

Copy the files from the diskette to the C:\SAMSUNG directory.

To do so, type COPY D:\Ddriver * . * C:\SAMSUNG after the C:\prompt and
press [Enter].

Edit the CONFIG.SYS file.

Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000/V entry.

Edit the AUTOEXEC.BAT file.

Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry.

Reboot the computer.



Let me know,

Mickey


  #8  
Old February 25th 05, 02:31 AM
Dudley Henriques
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

Tried all that Mick. No joy!
Don't bother getting into this too much Mickey. I think it's probably at
the point where the base driver is corrupted somehow. I think it might
be because when Hypersonic configured the computer before delivery, they
installed both Roxio and Nero on it. I uninstalled Roxio right away and
have gone with InCD, but always with problems. I think Roxio left me a
Registry present when it left :-)
Now Nero has been uninstalled, leaving behind three files in the driver
cache, and one is loading as part of the default XP driver for the OD.
It might just be time to reinstall XP and start from scratch. :-)
Dudley
"Mickey" wrote in message
...
Dudley,

Have you opened DM and under "Drivers", Update Driver or Rollback
Driver, or Uninstall Driver, than Reboot?

I'm still researching other avenues for you.

Don't delete any folders within C:\Windows, not a good idea, We will
figure it out together.

Mickey



  #9  
Old February 25th 05, 02:33 AM
Dudley Henriques
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

I checked this out on their site earlier and downloaded the manual in
PDF. I saw the reference. Problem is; Hypersonic didn't give me a disk
for the drive for some reason. I'll call them tomorrow and check this
out. If I had that CD, I could reload the driver.
Dudley
"Mickey" wrote in message
...
Dudley,
Try this: I obtained this information from your CDRW Manual on
www.samsung.com.

Setting Up the Device Driver

Automatic Setup

The device driver is located in the Ddriver folder of the CD Record
Utility disc which is provided in the package.

Insert the CD Record Utility disc into the CD-ROM drive and open the
Ddriver folder.

Run the CDSETUP.EXE file in the Ddriver folder.

When Setup is successfully completed, click OK button or press the
Enter key.

Reboot the computer.



Manual Setup

Make the C:\SAMSUNG directory.

Copy the files from the diskette to the C:\SAMSUNG directory.

To do so, type COPY D:\Ddriver * . * C:\SAMSUNG after the C:\prompt
and press [Enter].

Edit the CONFIG.SYS file.

Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000/V entry.

Edit the AUTOEXEC.BAT file.

Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry.

Reboot the computer.



Let me know,

Mickey




  #10  
Old February 25th 05, 03:31 AM
Mickey
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

Dudley,
You may want to try and Re-Install InCD, and reboot than uninstall it again,
it's worth a try. I have found Way too many articles and posts on InCD and
the problems it causes, I use Nero StartSmart and Nero Express and I have
had no problems at all. But for some reason the InCD keeps popping up in
Internet Posts with alot of problems with XP. Have you tried Nero's Post
Forum, I have seen a few on the subject, Sorry I couldn't help you. Best of
Luck.
Mickey


  #11  
Old February 25th 05, 04:17 AM
Dudley Henriques
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

Hey...thanks for trying anyway Mickey. I really appreciate it when
people respond and try to help. I think what I'll do is call Hypersonic
and talk to them about it. I know they won't be able to solve it, and I
really don't want to use their resource disk to take everything back to
the mirror they made at initial install. Reason for this is that they
sent the computer to me with both Roxio and nero on the hard drive
already. I think what I'll do is reformat and reinstall XP clean. Then
just use the default XP drivers to back up on CDRW's as read only. My
needs are simple enough that the drag and drop isn't all that important.
As long as a read only file can be executed, I'm ok with that.
Thanks again for the effort .
D
"Mickey" wrote in message
...
Dudley,
You may want to try and Re-Install InCD, and reboot than uninstall it
again, it's worth a try. I have found Way too many articles and posts
on InCD and the problems it causes, I use Nero StartSmart and Nero
Express and I have had no problems at all. But for some reason the
InCD keeps popping up in Internet Posts with alot of problems with XP.
Have you tried Nero's Post Forum, I have seen a few on the subject,
Sorry I couldn't help you. Best of Luck.
Mickey




  #12  
Old February 25th 05, 04:59 AM
Colin Barnhorst
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

The recent update fixes several problems with InCD, particularly with
Virtual PC.

--
Colin Barnhorst [MVP Windows - Virtual Machine]
(Reply to the group only unless otherwise requested)
"Mickey" wrote in message
...
Dudley,
You may want to try and Re-Install InCD, and reboot than uninstall it
again, it's worth a try. I have found Way too many articles and posts on
InCD and the problems it causes, I use Nero StartSmart and Nero Express
and I have had no problems at all. But for some reason the InCD keeps
popping up in Internet Posts with alot of problems with XP. Have you tried
Nero's Post Forum, I have seen a few on the subject, Sorry I couldn't help
you. Best of Luck.
Mickey




  #13  
Old February 25th 05, 02:23 PM
Dudley Henriques
external usenet poster
 
Posts: n/a
Default XP System32 Drivers Question Please

My system came preloaded with both Roxio and Nero InCD on it. In my
opinion it was doomed from the start with this setup due to conflicts
with the drivers. I uninstalled Roxio EZCD Creator immediately and have
had nothing but trouble with InCD ever since. The latest version only
made my system worse. I've used the clean tool...the registry
tool....and uninstalled and reinstalled InCD trying to fix the issues
with crashing during format on the CDRW disks. Even changed media; no
soap.
Now, I've uninstalled Nero for good and am using the XP default drivers
for the Samsung CDRW, but Nero has put a driver file in the default
driver that can't be removed if the driver is to work.
The system is so corrupted at this point, I'm simply going to clean
reinstall XP.
Thank you for responding anyway.
DH
"Colin Barnhorst" wrote in message
...
The recent update fixes several problems with InCD, particularly with
Virtual PC.

--
Colin Barnhorst [MVP Windows - Virtual Machine]
(Reply to the group only unless otherwise requested)
"Mickey" wrote in message
...
Dudley,
You may want to try and Re-Install InCD, and reboot than uninstall it
again, it's worth a try. I have found Way too many articles and posts
on InCD and the problems it causes, I use Nero StartSmart and Nero
Express and I have had no problems at all. But for some reason the
InCD keeps popping up in Internet Posts with alot of problems with
XP. Have you tried Nero's Post Forum, I have seen a few on the
subject, Sorry I couldn't help you. Best of Luck.
Mickey






 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
What drivers do I need for XP installed in older pc? Joe General XP issues or comments 26 February 7th 05 11:20 PM
Updating Nvidia drivers Sharon Parrish Windows XP Help and Support 3 January 8th 05 08:18 PM
New Hardware Device Problem DonM Hardware and Windows XP 11 September 25th 04 05:37 AM
BSOD on WindowsXP with Motorola SM56 drivers cTroi General XP issues or comments 0 September 24th 04 01:19 PM
WIN XP installed now no drivers - I have Dell Drivers disc Phil General XP issues or comments 1 August 29th 04 05:34 AM






All times are GMT +1. The time now is 05:27 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 PCbanter.
The comments are property of their posters.