If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
XP machines not acting the same
Alright, I have tried everything on the net to get my networked "worked" out... Anyway, Here is my problem: I have a home network with 3 machines- 2 XP machines and 1 Win 7. I swapped out an older XP machine with a new WIN 7 machine. After changing everything under the sun(sometimes not waiting long enough I think to let setting take effect) to get them all to communicate. PC#1) XPMike ETHERNET 2) WIN7 KIM WIRELESS 3) XPsunflower WIRELESS 99% of the time PC 1 and 2 see each other and share all folders. MOST of the time PC #1 & 3 do also. MOST of the time #2 and 3 do not. RIght now PC #2 can see and acces shared folders on #3. #3 Doesn't see #2 at all or the shared folders. I finally got frustrated and downloaded Network Magic to see if it would help me get this sorted out to no avail.It follows along with the same access that Windows shows with the machine software(accessability-wise). Oddly PC #1 & 2 see each other and share no matter what options I change.I have tried Advance file share on the XP's also and still didn't change anything(after disabling simple share) and re enabling simple share.Right now Simple share is actually turned off the XP machines. I have made exceptions in the firewalls on both.I tried the network set up Wizard with a USB flash and countless other things that have not worked. I am finally now asking for help to get the home office buttoned up and reduce issues in the future... I also have attached some info below and can provide anything else needed to get me through this. Now, Please accept my thanks in advance! WORKGROUP (“WORK” NO HOME GROUP) Discovery etc is all on w\o passwords etc 3) “sunflower” (XP Pro SP3 Machine) Dell 192.168.1.102 255.255.255.0 MAC Address: xx:xx:xx:xx:xx:xx Simple file sharing enabled 54Mbps DYNEX G Desktop card #3 Packet scheduler miniport WORKGROUP (WORK) Discovery etc is all on w\o passwords etc Firewalled w\ exceptions #3 Scan info below also: Internet Service Default Outlook Express Mail POP3 / POP3 FAILED Default Outlook Express News Not Configured Internet Explorer Web Proxy Not Configured Computer Information Computer System TOWER Operating System Microsoft Windows XP Professional Version 5.1.2600 Modems and Network Adapters Modems Network Adapters [00000000] Dynex G Desktop Card FAILED Caption = [00000000] Dynex G Desktop Card DatabasePath = %SystemRoot%\System32\drivers\etc DefaultIPGateway = 192.168.1.1(Same Subnet) (PASSED) Description = Dynex G Desktop Card #3 - Packet Scheduler Miniport DHCPEnabled = TRUE DHCPLeaseExpires = 9:32:06 AM 5/11/2010 DHCPLeaseObtained = 9:32:06 AM 5/10/2010 DHCPServer = 192.168.1.1 (PASSED) DNSDomain = cmts.eph.ptd.net DNSEnabledForWINSResolution = FALSE DNSHostName = TOWER DNSServerSearchOrder (FAILED) 216.144.187.199 (FAILED) 207.44.96.129 (FAILED) 216.144.187.71 (FAILED) 192.168.1.1 (PASSED) DomainDNSRegistrationEnabled = FALSE FullDNSRegistrationEnabled = TRUE GatewayCostMetric = 25 Index = 0 IPAddress = 192.168.1.102 (PASSED) IPConnectionMetric = 25 IPEnabled = TRUE IPFilterSecurityEnabled = FALSE IPSecPermitIPProtocols = 0 IPSecPermitTCPPorts = 0 IPSecPermitUDPPorts = 0 IPSubnet = 255.255.255.0 IPXAddress = 00000000:002275196678 IPXEnabled = TRUE IPXFrameType = 255 IPXVirtualNetNumber = 2735D185 MACAddress = 00:22:75:19:66:78 ServiceName = BCM43XX SettingID = {F244EC61-ECCE-4BD3-957D-D9C9432C6083} TcpipNetbiosOptions = 0 WINSEnableLMHostsLookup = TRUE |
Ads |
#2
|
|||
|
|||
XP machines not acting the same
Also, 2 PC's are connected to a LinkSys WRT 600N Router on the same Channel (except the ethernet machine). THe Router is connected to a Cable Modem. Thanks again...I hope! |
#3
|
|||
|
|||
XP machines not acting the same
Also, 2 PC's are connected to a LinkSys WRT 600N Router on the same Channel (except the ethernet machine). THe Router is connected to a Cable Modem. Thanks again...I hope! |
#4
|
|||
|
|||
XP machines not acting the same
damageinc wrote in
: Alright, I have tried everything on the net to get my networked "worked" out... Anyway, Here is my problem: I have a home network with 3 machines- 2 XP machines and 1 Win 7. I swapped out an older XP machine with a new WIN 7 machine. After changing everything under the sun(sometimes not waiting long enough I think to let setting take effect) to get them all to communicate. [...] IPXEnabled = TRUE IPXFrameType = 255 IPXVirtualNetNumber = 2735D185 I see you have IPX protocol enabled. You might have your Microsoft networking bound to both NetBT (TCP/IP) and IPX and the machines could get confused as to which interface to use. If you don't need IPX protocol, then disable/uninstall it. If you do need it, try un-binding it from the File and Printer Sharing services... Double-click Network Connections Control panel - Advanced (Menu) - Advanced Settings(Dropdown) - Click on your "Local Area Connection" in top window then in bottom window make sure only TCP/IP is checked under the File and Printer Settings (maybe for Client for Microsoft Networks as well). HTH, John |
#5
|
|||
|
|||
XP machines not acting the same
damageinc wrote in
: Alright, I have tried everything on the net to get my networked "worked" out... Anyway, Here is my problem: I have a home network with 3 machines- 2 XP machines and 1 Win 7. I swapped out an older XP machine with a new WIN 7 machine. After changing everything under the sun(sometimes not waiting long enough I think to let setting take effect) to get them all to communicate. [...] IPXEnabled = TRUE IPXFrameType = 255 IPXVirtualNetNumber = 2735D185 I see you have IPX protocol enabled. You might have your Microsoft networking bound to both NetBT (TCP/IP) and IPX and the machines could get confused as to which interface to use. If you don't need IPX protocol, then disable/uninstall it. If you do need it, try un-binding it from the File and Printer Sharing services... Double-click Network Connections Control panel - Advanced (Menu) - Advanced Settings(Dropdown) - Click on your "Local Area Connection" in top window then in bottom window make sure only TCP/IP is checked under the File and Printer Settings (maybe for Client for Microsoft Networks as well). HTH, John |
#6
|
|||
|
|||
XP machines not acting the same
I disabled IPX. No luck. Now after a few days, I haven't made any changes and the scenario is: THe Win 7 Machine doesn't see either XP machine even though it can ping them both. One of the XP machines sees the Win 7 Machine but can't access it at all. The other XP machine( the one that runs with the better connectivity) can open Windo7 7 shares on cmd but cannot see the Win 7 Machine in WorkGroup. Both XP machines share and see each other THis is Unreal. I have tried the LLLTD hot fix and everything else under the sun- NO LUCK! HELP! My wife has a work from home office and I just got laid off so I thought I would work on making her computing more efficient with printer and file sharing but this is a disaster.I have spent over 100hrs on this. Oh, I also disable IPV6 again- No luck. And....I connected all 3 machines to the router by ethernet to rule out any wireless issues...still no help. AAARRGGHHH! And 1 more thing- I dont get this at all...THe Win 7 Machine can't access itself in the network- access is denied! WTH? John Wunderlich;1211309 Wrote: damageinc wrote in : IPXEnabled = TRUE IPXFrameType = 255 IPXVirtualNetNumber = 2735D185 I see you have IPX protocol enabled. You might have your Microsoft networking bound to both NetBT (TCP/IP) and IPX and the machines could get confused as to which interface to use. If you don't need IPX protocol, then disable/uninstall it. If you do need it, try un-binding it from the File and Printer Sharing services... Double-click Network Connections Control panel - Advanced (Menu) - Advanced Settings(Dropdown) - Click on your "Local Area Connection" in top window then in bottom window make sure only TCP/IP is checked under the File and Printer Settings (maybe for Client for Microsoft Networks as well). HTH, John |
#7
|
|||
|
|||
XP machines not acting the same
I disabled IPX. No luck. Now after a few days, I haven't made any changes and the scenario is: THe Win 7 Machine doesn't see either XP machine even though it can ping them both. One of the XP machines sees the Win 7 Machine but can't access it at all. The other XP machine( the one that runs with the better connectivity) can open Windo7 7 shares on cmd but cannot see the Win 7 Machine in WorkGroup. Both XP machines share and see each other THis is Unreal. I have tried the LLLTD hot fix and everything else under the sun- NO LUCK! HELP! My wife has a work from home office and I just got laid off so I thought I would work on making her computing more efficient with printer and file sharing but this is a disaster.I have spent over 100hrs on this. Oh, I also disable IPV6 again- No luck. And....I connected all 3 machines to the router by ethernet to rule out any wireless issues...still no help. AAARRGGHHH! And 1 more thing- I dont get this at all...THe Win 7 Machine can't access itself in the network- access is denied! WTH? John Wunderlich;1211309 Wrote: damageinc wrote in : IPXEnabled = TRUE IPXFrameType = 255 IPXVirtualNetNumber = 2735D185 I see you have IPX protocol enabled. You might have your Microsoft networking bound to both NetBT (TCP/IP) and IPX and the machines could get confused as to which interface to use. If you don't need IPX protocol, then disable/uninstall it. If you do need it, try un-binding it from the File and Printer Sharing services... Double-click Network Connections Control panel - Advanced (Menu) - Advanced Settings(Dropdown) - Click on your "Local Area Connection" in top window then in bottom window make sure only TCP/IP is checked under the File and Printer Settings (maybe for Client for Microsoft Networks as well). HTH, John |
#8
|
|||
|
|||
XP machines not acting the same
....and all 3 machines have windows firewall disabled All 3 have free avast antivirus and are running windows defender. |
#9
|
|||
|
|||
XP machines not acting the same
....and all 3 machines have windows firewall disabled All 3 have free avast antivirus and are running windows defender. |
#10
|
|||
|
|||
XP machines not acting the same
Lots of views, little help... Anyway, I have been able( by changing the "node" on the xp machines to enable both of them now to share whatever I want.They can also access the folders that I have been able to share on Win 7. Again, all machines are on ethernet now... Anyway, this is turning into a blog on my stressful inability to completely share xp and win 7 machines... I have searched everywhere for a fix, no luck... The xp machines have simple file share off,firewall disabled.THe Win 7 machine has IPV6 disabled...all file sharing and discovery turned out w\o password . Strange thing is that Win 7 machine can ping the 2 xps but cannot see them in network.Oddly they show up on network map. WHen I click on the Win7 computer on the win 7 machine, it says access denied? Also- even more strange, the Win 7 machine cannot share Public folders.It has an E: drive (CDRW) that can be accessed by the xp machines. WHen I go into share( Everyone is listed on the folders I opened, the Win 7 machine tells me that "This folder can't be shared. I know that Win 7 shares Public if you turn on discovery and file sharing.What eh heck? Anyone on this forum have an idea? Seems like I am 90% there and something simple is holding me back.Even more strange is that I was able to access anything I wanted before on the Win 7 machine with one of the Xp's before consistantly. This shouldnt be this difficult... Any ideas are appreciated or maybe this isn't the right forum to ask? |
#11
|
|||
|
|||
XP machines not acting the same
Lots of views, little help... Anyway, I have been able( by changing the "node" on the xp machines to enable both of them now to share whatever I want.They can also access the folders that I have been able to share on Win 7. Again, all machines are on ethernet now... Anyway, this is turning into a blog on my stressful inability to completely share xp and win 7 machines... I have searched everywhere for a fix, no luck... The xp machines have simple file share off,firewall disabled.THe Win 7 machine has IPV6 disabled...all file sharing and discovery turned out w\o password . Strange thing is that Win 7 machine can ping the 2 xps but cannot see them in network.Oddly they show up on network map. WHen I click on the Win7 computer on the win 7 machine, it says access denied? Also- even more strange, the Win 7 machine cannot share Public folders.It has an E: drive (CDRW) that can be accessed by the xp machines. WHen I go into share( Everyone is listed on the folders I opened, the Win 7 machine tells me that "This folder can't be shared. I know that Win 7 shares Public if you turn on discovery and file sharing.What eh heck? Anyone on this forum have an idea? Seems like I am 90% there and something simple is holding me back.Even more strange is that I was able to access anything I wanted before on the Win 7 machine with one of the Xp's before consistantly. This shouldnt be this difficult... Any ideas are appreciated or maybe this isn't the right forum to ask? |
#12
|
|||
|
|||
XP machines not acting the same
damageinc wrote in
: I disabled IPX. No luck. Now after a few days, I haven't made any changes and the scenario is: THe Win 7 Machine doesn't see either XP machine even though it can ping them both. One of the XP machines sees the Win 7 Machine but can't access it at all. The other XP machine( the one that runs with the better connectivity) can open Windo7 7 shares on cmd but cannot see the Win 7 Machine in WorkGroup. Both XP machines share and see each other THis is Unreal. I have tried the LLLTD hot fix and everything else under the sun- NO LUCK! HELP! My wife has a work from home office and I just got laid off so I thought I would work on making her computing more efficient with printer and file sharing but this is a disaster.I have spent over 100hrs on this. Oh, I also disable IPV6 again- No luck. And....I connected all 3 machines to the router by ethernet to rule out any wireless issues...still no help. AAARRGGHHH! And 1 more thing- I dont get this at all...THe Win 7 Machine can't access itself in the network- access is denied! WTH? Being that the two XP machines communicate just fine, I would guess that the problem seems to point to the Win 7 machine. I have no experience with Win 7. There have been no Win 7 newsgroups formed. You might want to look for answers in the Microsoft Windows 7 Forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 -- John |
#13
|
|||
|
|||
XP machines not acting the same
damageinc wrote in
: I disabled IPX. No luck. Now after a few days, I haven't made any changes and the scenario is: THe Win 7 Machine doesn't see either XP machine even though it can ping them both. One of the XP machines sees the Win 7 Machine but can't access it at all. The other XP machine( the one that runs with the better connectivity) can open Windo7 7 shares on cmd but cannot see the Win 7 Machine in WorkGroup. Both XP machines share and see each other THis is Unreal. I have tried the LLLTD hot fix and everything else under the sun- NO LUCK! HELP! My wife has a work from home office and I just got laid off so I thought I would work on making her computing more efficient with printer and file sharing but this is a disaster.I have spent over 100hrs on this. Oh, I also disable IPV6 again- No luck. And....I connected all 3 machines to the router by ethernet to rule out any wireless issues...still no help. AAARRGGHHH! And 1 more thing- I dont get this at all...THe Win 7 Machine can't access itself in the network- access is denied! WTH? Being that the two XP machines communicate just fine, I would guess that the problem seems to point to the Win 7 machine. I have no experience with Win 7. There have been no Win 7 newsgroups formed. You might want to look for answers in the Microsoft Windows 7 Forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 -- John |
#14
|
|||
|
|||
XP machines not acting the same
The solution is pretty simple really, but I advise that you use this as a last resort: Either upgrade the two XP devices to Vista or W7, or downgrade W7 to XP. |
#15
|
|||
|
|||
XP machines not acting the same
The solution is pretty simple really, but I advise that you use this as a last resort: Either upgrade the two XP devices to Vista or W7, or downgrade W7 to XP. |
|
Thread Tools | |
Display Modes | |
|
|