If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
RPC service gets error when shutdown Windows
Hi all,
When I shutdown Windows, I always get the error message Application popup: svchost.exe - Application Error : The instruction at "0x7c9118d2" referenced memory at "0xacf5001c". The memory could not be "written". Click on OK to terminate the program Click on CANCEL to debug the program So I saw in Event Log, I recognized there were 2 errors that had happened before event log service stopped These are 2 error messages that recorded in Event Log - The Remote Procedure Call (RPC) service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Reboot the machine. - The Service Control Manager tried to take a corrective action (Reboot the machine) after the unexpected termination of the Remote Procedure Call (RPC) service, but this action failed with the following error: The device is not ready. I really don't understand why Windows got these errors because Windows had run smoothly so far. It just happens in this week. Last Sunday, I move my second harddisk from IDE2 to IDE1 and DVD from IDE1 to IDE2. So, I don't know if these errors happens when I moved HDD and DVD. My computer has 2 OSs - Windows XP SP2 - Fedora Core 3 Please hep me Thank you |
Ads |
#2
|
|||
|
|||
RPC service gets error when shutdown Windows
Sorry, but it has to be asked:
Antivirus and spyware scan? Are your drives configured for cable select or master/slave? Have you run a hard drive integrity test such as HDTune or Data Lifeguard? "Tuyen Tran" wrote: Hi all, When I shutdown Windows, I always get the error message Application popup: svchost.exe - Application Error : The instruction at "0x7c9118d2" referenced memory at "0xacf5001c". The memory could not be "written". Click on OK to terminate the program Click on CANCEL to debug the program So I saw in Event Log, I recognized there were 2 errors that had happened before event log service stopped These are 2 error messages that recorded in Event Log - The Remote Procedure Call (RPC) service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Reboot the machine. - The Service Control Manager tried to take a corrective action (Reboot the machine) after the unexpected termination of the Remote Procedure Call (RPC) service, but this action failed with the following error: The device is not ready. I really don't understand why Windows got these errors because Windows had run smoothly so far. It just happens in this week. Last Sunday, I move my second harddisk from IDE2 to IDE1 and DVD from IDE1 to IDE2. So, I don't know if these errors happens when I moved HDD and DVD. My computer has 2 OSs - Windows XP SP2 - Fedora Core 3 Please hep me Thank you |
#3
|
|||
|
|||
RPC service gets error when shutdown Windows
This seems to indicate that your RAM may be faulty or failing. Locate
MemTest86+ and check your RAM. Replace the defective RAM module. On 14/09/2006 Tuyen Tran wrote: Hi all, When I shutdown Windows, I always get the error message Application popup: svchost.exe - Application Error : The instruction at "0x7c9118d2" referenced memory at "0xacf5001c". The memory could not be "written". Click on OK to terminate the program Click on CANCEL to debug the program So I saw in Event Log, I recognized there were 2 errors that had happened before event log service stopped These are 2 error messages that recorded in Event Log - The Remote Procedure Call (RPC) service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Reboot the machine. - The Service Control Manager tried to take a corrective action (Reboot the machine) after the unexpected termination of the Remote Procedure Call (RPC) service, but this action failed with the following error: The device is not ready. I really don't understand why Windows got these errors because Windows had run smoothly so far. It just happens in this week. Last Sunday, I move my second harddisk from IDE2 to IDE1 and DVD from IDE1 to IDE2. So, I don't know if these errors happens when I moved HDD and DVD. My computer has 2 OSs - Windows XP SP2 - Fedora Core 3 Please hep me Thank you -- --- Y. |
Thread Tools | |
Display Modes | |
|
|