If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
PCI-Express to SATA II ...updating :-)
Asus M3N78 (plain one ...i.e. not a [M3N78-??]
x6000 Windsor 2x1gb Crucial Ballistix ...(that will now only run at normal timings and voltage, but, that's a whole different story!) XP Home ed. SP3+ subsequent updates. ....a little while ago I fitted a Silcon Image SIL 3132 PCI-Express to SATAII card, (in order to add in a 3rd SATA II hd). ...not using RAID btw. ....and I've been wading through the downloads and related "read-me's" for updating it's flash bios, mainly out of interest but, now I notice a slight driver/bios version mismatch. http://www.siliconimage.com/products...ct.aspx?pid=32 I currently have versions / 7.3.1.3 bios on the card and 1.5.19.0 driver installed into Windows. ...yet the description for driver 1.5.19.0 http://www.siliconimage.com/support/...x?pid=32&cat=3 suggests that I should be using bios 7.5.0.7 with that driver, which appears to be newer than the bios currently on the card i.e - 7.3.1.3 ....before someone says "If it ain't broke don't fix it," ...I was just having a rummage around, and collecting up the relevant (newer) bios, flash updater etc. and selecting the relevant files gets more difficult the more I read ! i.e. I've obviously got to avoid the bios files for motherboard tweakers that want to add SIL3132 code into a motherboard bios, and also avoid the "base" version ? ... meaning I think the bios file I want is prefixed with an "r" ....and I eventaully spotted that the Windows flash updater requires Sun JAVA, which I will not allow into my machine ! ..I think ..even though one would be using a Windows DOS box ? ....perhaps I should do it in DOS ? ...hang on, ..no floppy drive !! ....other considerations a- I do not use RAID, ... and when I first installed the card, (using its' supplied CD), it was a "hit and miss" affair in that one had to sort of choose RAID, in order to get the driver installed so that I could use 1 SATA II hd connected to it, for use as a non-raid disk :-( ....anyhow, do you think that flashing the card with bios version 7.5.0.7 is wise ? ....also Device Manager | SCSI and RAID controllers | Device Info tab ...says "Host Link Speed" & "Device Link Speed" are both "Generation 1 (1.5Gb/s)", though I think I spotted in a discussion forum a couple of months ago, that this was simply a labelling error, and that hd benchmarking utility would disprove this. ...will Lavalys trial, hd benchmark gimme a reading, ..it will not! ....anyhooooo, any tips muchly appreciated. regards, Richard. |
Ads |
Thread Tools | |
Display Modes | |
|
|