A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Hardware and Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Video Capture-Record Audio Volume Problem



 
 
Thread Tools Display Modes
  #1  
Old January 26th 12, 11:36 AM posted to microsoft.public.windowsxp.hardware
No_Name
external usenet poster
 
Posts: 9
Default Video Capture-Record Audio Volume Problem

I a using XP SP3, and I want to record and capture a few web tutorial
video clips. A few clips are youtube, and a few are not. But that
shouldn't matter, I think and hope.

Anyway, I am using Debut Video Capture Software V1.49. My first
experience was that the video was captured and was re-playable fine by
Media Player. However there was no audio whatsoever.

To try to get audio, I put a audio Y splitter on the mobo speaker out,
and then connected that to both my earphones and mobo microphone in.
Now I do get audio in the video clips that I record.

My problem is that the recorded audio has lost much of its volume and
is too low. I can't turn up the volume because the earphones have no
adjustment for that like speakers do.

Can anyone suggest some XP setting(s) to improve this? I have
experimented with same, but have not been able to find anything.

Thanks

Roy

Ads
  #2  
Old January 26th 12, 12:02 PM posted to microsoft.public.windowsxp.hardware
Paul
external usenet poster
 
Posts: 18,275
Default Video Capture-Record Audio Volume Problem

wrote:
I a using XP SP3, and I want to record and capture a few web tutorial
video clips. A few clips are youtube, and a few are not. But that
shouldn't matter, I think and hope.

Anyway, I am using Debut Video Capture Software V1.49. My first
experience was that the video was captured and was re-playable fine by
Media Player. However there was no audio whatsoever.

To try to get audio, I put a audio Y splitter on the mobo speaker out,
and then connected that to both my earphones and mobo microphone in.
Now I do get audio in the video clips that I record.

My problem is that the recorded audio has lost much of its volume and
is too low. I can't turn up the volume because the earphones have no
adjustment for that like speakers do.

Can anyone suggest some XP setting(s) to improve this? I have
experimented with same, but have not been able to find anything.

Thanks

Roy


On WinXP, you can try the "what you hear" option,
which loops sound around from the output, back to the input
mixer. No cable needed.

On my Soundmax motherboard audio, that option is called Stereo Mix.
It's in the record section. In this picture I found, the current
selection is "Microphone", and by clicking the red button
underneath "Stereo Mix", you can unmute the Stereo Mix and
then the recording may get audio.

http://img148.imageshack.us/img148/4818/untitledsy0.jpg

I can't promise what kind of audio level you'll get. In that
picture, the slider is way down on the Stereo Mix, and it can
be advanced upwards to bump up the recording volume.

If that kind of custom panel isn't visible on your computer,
you may have to look around for it. For example, I have a
smax4.exe and a smax4.cpl (control panel) file in this folder.
Your sound might be a different brand, and you'd look
in the appropriate folder for it. It's possible mine also uses
a Startup item to ensure it's launched at boot.

C:\Program Files\Analog Devices\SoundMAX

It's my understanding, that the "what you hear" option
is removed from later OSes. In which case, a person
doing what you're attempting to do, would end up
using the cabling trick instead. The thing would never
have made "bit perfect" copies in the first place (due
to the noise floor), so I don't understand the need to
remove this feature. But in WinXP, as far as I know,
it should work.

The Microphone usually has a "boost" feature. Again, referring
to that picture above, the Microphone has the green button at
the bottom showing it is unmuted. But to the right of the green
button, is a beveled square button which hides the "boost" function.
Clicking that brings up a dialog to enable "boost". But with your
current setup, I'd start by checking the sliders. You really
shouldn't need to enable boost, with what you're doing. There
should be enough gain already.

Paul
  #3  
Old January 26th 12, 05:06 PM posted to microsoft.public.windowsxp.hardware
Char Jackson
external usenet poster
 
Posts: 10,449
Default Video Capture-Record Audio Volume Problem

On Thu, 26 Jan 2012 05:36:56 -0500, wrote:

I a using XP SP3, and I want to record and capture a few web tutorial
video clips. A few clips are youtube, and a few are not. But that
shouldn't matter, I think and hope.

Anyway, I am using Debut Video Capture Software V1.49. My first
experience was that the video was captured and was re-playable fine by
Media Player. However there was no audio whatsoever.

To try to get audio, I put a audio Y splitter on the mobo speaker out,
and then connected that to both my earphones and mobo microphone in.
Now I do get audio in the video clips that I record.

My problem is that the recorded audio has lost much of its volume and
is too low. I can't turn up the volume because the earphones have no
adjustment for that like speakers do.

Can anyone suggest some XP setting(s) to improve this? I have
experimented with same, but have not been able to find anything.


Seems like the hard way (more steps, more apps, more time) would be to
demux the files to separate the audio from the video, increase the
gain of the audio portion, then remux the audio and video.

It might be easier to use a different process to download the video
clips. If you're using Firefox, there are numerous add-ons that help
you do that.

  #4  
Old January 26th 12, 07:49 PM posted to microsoft.public.windowsxp.hardware
No_Name
external usenet poster
 
Posts: 9
Default Video Capture-Record Audio Volume Problem

On Thu, 26 Jan 2012 10:06:34 -0600, Char Jackson
wrote:

Seems like the hard way (more steps, more apps, more time) would be to
demux the files to separate the audio from the video, increase the
gain of the audio portion, then remux the audio and video.

It might be easier to use a different process to download the video
clips. If you're using Firefox, there are numerous add-ons that help
you do that.


Firefox?
I want to capture the clip that plays on my screen, not download it.
In fact, the clips I have in mind are not downloadable.

Thanks

Roy
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 10:01 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.