|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
January 18th 05, 06:39 PM
|
|||
|
|||
Hanging on reboot at "Checking NVRAM..."
MSI 845E Max mainboard (MS-6566E ver 1.0) hangs at reboot. Removing USB
device (ADSTech DVD Xpress capture device) solves problem. Note: device works normally when plugged in after WinXP starts. Could this be just the device causing a conflict somehow? ( I am also contacting ADSTech for support) Weak or insufficient power supply? (this PC is loaded up fairly well) CMOS battery weak? Any guidance appreciated. r. 
|
| Ads |
|
#2
January 18th 05, 06:56 PM
|
|||
|
|||
|
Hanging on reboot at "Checking NVRAM..."
Forgot to mention that it does not hang every time - even with all USB devices connected. Which is why I am thinking it's not just the ADSTech device causing the problem. r. "namniar" this@that wrote in message ... MSI 845E Max mainboard (MS-6566E ver 1.0) hangs at reboot. Removing USB device (ADSTech DVD Xpress capture device) solves problem. Note: device works normally when plugged in after WinXP starts. Could this be just the device causing a conflict somehow? ( I am also contacting ADSTech for support) Weak or insufficient power supply? (this PC is loaded up fairly well) CMOS battery weak? Any guidance appreciated. r.
|
|
#3
January 18th 05, 08:39 PM
|
|||
|
|||
|
Hanging on reboot at "Checking NVRAM..."
Did you install the correct, and latest, chipset drivers for you MSI
motherboard? If the chipset is based on VIA chipsets, you should also install the USB filters from Via. "namniar" this@that wrote in message ... Forgot to mention that it does not hang every time - even with all USB devices connected. Which is why I am thinking it's not just the ADSTech device causing the problem. r. "namniar" this@that wrote in message ... MSI 845E Max mainboard (MS-6566E ver 1.0) hangs at reboot. Removing USB device (ADSTech DVD Xpress capture device) solves problem. Note: device works normally when plugged in after WinXP starts. Could this be just the device causing a conflict somehow? ( I am also contacting ADSTech for support) Weak or insufficient power supply? (this PC is loaded up fairly well) CMOS battery weak? Any guidance appreciated. r.
|
|
#4
January 19th 05, 12:05 AM
|
|||
|
|||
|
Hanging on reboot at "Checking NVRAM..."
Yes I have.
r. "Yves Leclerc" wrote in message ... Did you install the correct, and latest, chipset drivers for you MSI motherboard? If the chipset is based on VIA chipsets, you should also install the USB filters from Via. "namniar" this@that wrote in message ... Forgot to mention that it does not hang every time - even with all USB devices connected. Which is why I am thinking it's not just the ADSTech device causing the problem. r. "namniar" this@that wrote in message ... MSI 845E Max mainboard (MS-6566E ver 1.0) hangs at reboot. Removing USB device (ADSTech DVD Xpress capture device) solves problem. Note: device works normally when plugged in after WinXP starts. Could this be just the device causing a conflict somehow? ( I am also contacting ADSTech for support) Weak or insufficient power supply? (this PC is loaded up fairly well) CMOS battery weak? Any guidance appreciated. r.
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Slow Reboot and Shutdown solved!! | JR | General XP issues or comments | 0 | July 27th 04 09:58 AM |
| Slow Reboot and Shutdown solved!! | JR | General XP issues or comments | 0 | July 27th 04 09:46 AM |
| Computer hanging after inserting CD or DVD | Hardware and Windows XP | 0 | July 23rd 04 02:21 AM | |
| Slow Reboot and Shutdown solved!! | JR | General XP issues or comments | 0 | July 16th 04 10:53 PM |
Linear Mode
