If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How would I know which hdd this is??
Hi all, this appears under event viewer in XP.
The driver detected a controller error on \Device\Harddisk2\D. Whats the D mean?? D on the system is a dvd burner. I dont think its the burner tho. I have a SATA in this system, which is the main hdd. And an 80 IDE hdd, on primary IDE. I know the error means I need to replace a cable, BUT what hdd is it talking about? The IDE?? Does Harddisk2 mean the 2nd hdd? Which is the IDE? I also have a floppy, and a USB 2 internal card reader installed. Or is it the disk drive? Any info appreciated Thanx |
Ads |
#2
|
|||
|
|||
How would I know which hdd this is??
As for which drive [plus letter] applies to what drive: this can be confusing.
If one has a 'simple' IDE only configuration, XP automatically assigns drive letters C thru Z on the basis of First Hard Drive [C], Second Hard Drive [D]...., First Optical Drive [E], Second Optical Drive [F]. It becomes mor complex when one uses partitions on the hard drives: these then will allocate letters based upon the primary partition, then the secondary. So on the basis of First Hard Drive - 1st Partition [C], Second Hard Drive - 1st Partition [D], First Hard Drive - 2nd Partition [E], Second Hard Drive - 2nd Partition [F], First Optical Drive [G], Second Optical Drive [H]. With the addition of SATA: in a NON-RAID or BASIC configuration, one can assume that where Windows is installed on the SATA drive, then it becomes the 'First' Hard Drive. S for your 'error on \Device\Harddisk2\D': you can take it that the reference to 'D' means the second drive, as confirmed with 'Harddisk2': also that it is your 80Gb IDE drive. SO TAKE CA backup all the important files on that drive, if you have enough space 'copy' all your files to a NEW folder on the C Drive [Call it DDRIVE]. If you have any applications, then make sure they can be reinstalled, by having the installation CDs. If not then buy a new Hard Drive and 'clone the D Drive'. "Paul" wrote: Hi all, this appears under event viewer in XP. The driver detected a controller error on \Device\Harddisk2\D. Whats the D mean?? D on the system is a dvd burner. I dont think its the burner tho. I have a SATA in this system, which is the main hdd. And an 80 IDE hdd, on primary IDE. I know the error means I need to replace a cable, BUT what hdd is it talking about? The IDE?? Does Harddisk2 mean the 2nd hdd? Which is the IDE? I also have a floppy, and a USB 2 internal card reader installed. Or is it the disk drive? Any info appreciated Thanx |
Thread Tools | |
Display Modes | |
|
|