If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
new hd not seen in bios
i bought a WD1600AAJB, but it would not see it, i have that last bios that was made for the m/b tries all different jumper settings on drive, different cable etc, but my original drive works so i know its not the m/b ? so im sending the hd back for a raplacement.
does the 6590 kt4 ultra take 160gb drives. my origina drive was an ibm deskstar 60gb that has the click of death but still sometimes works. s there something in the m/b bios i cna try i cleared nv ram to no avail, then put my ibm back in and it worked. so.... any one help asap before i post off new maybe broke hd |
Ads |
#2
|
|||
|
|||
Quote:
hd is ide |
#3
|
|||
|
|||
new hd not seen in bios
On Jan 21, 6:24*pm, fender62 wrote:
i bought a WD1600AAJB, but it would not see it, i have that last bios that was made for the m/b tries all different jumper settings on drive, different cable etc, but my original drive works so i know its not the m/b ? so im sending the hd back for a raplacement. does the 6590 kt4 ultra take 160gb drives. my origina drive was an ibm deskstar 60gb that has the click of death but still sometimes works. s there something in the m/b bios i cna try i cleared nv ram to no avail, then put my ibm back in and it worked. so.... any one help asap before i post off new maybe broke hd -- fender62 How are you connecting the drive? Master, Slave or stand-alone. All WD drives are very unique and the IDE control jumper is very important. |
#4
|
|||
|
|||
Quote:
http://wdc.custhelp.com/cgi-bin/wdc....reated=#jumper |
#5
|
|||
|
|||
new hd not seen in bios
On Jan 22, 1:04*pm, fender62 wrote:
smlunatick;3247886 Wrote: On Jan 21, 6:24*pm, fender62 wrote:- i bought a WD1600AAJB, but it would not see it, i have that last bios that was made for the m/b tries all different jumper settings on drive, different cable etc, but my original drive works so i know its not the m/b ? so im sending the hd back for a raplacement. does the 6590 kt4 ultra take 160gb drives. my origina drive was an ibm deskstar 60gb that has the click of death but still sometimes works. s there something in the m/b bios i cna try i cleared nv ram to no avail, then put my ibm back in and it worked. so.... any one help asap before i post off new maybe broke hd -- fender62- How are you connecting the drive? *Master, Slave or stand-alone. All WD drives are very unique and the IDE control jumper is very important. i tried all these, its the only one that was on there website, plus i phoned the tech support, and tried on another pc http://tinyurl.com/bxye3r -- fender62 Please check with this web page: http://wdc.custhelp.com/cgi-bin/wdc....i=&p_topview=1 Not sure the one you tried is the same as your. I did find the one for your model. |
#6
|
|||
|
|||
Quote:
i have sent hd back to supplier for another, i hope it works will keep posted, thanks for your help |
Thread Tools | |
Display Modes | |
|
|