If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
462 m/b with sata ?
i have am athlon 2400 cpu, id like to find a used m/b that has sata instead of ide, whats a good motherboard Socket A/ Socket 462 that has sata
that i might find used on fleabay. |
Ads |
#2
|
|||
|
|||
462 m/b with sata ?
fender62 wrote:
i have am athlon 2400 cpu, id like to find a used m/b that has sata instead of ide, whats a good motherboard Socket A/ Socket 462 that has sata that i might find used on fleabay. Use the search engine here. http://www.motherboards.org/mobot/ Set Socket to "Socket A (462)" Set SATA to 1.5 gigabits per second, as 3.0 for that vintage is unlikely. I got a list of 215 motherboards. Now, some of those, will have a separate chip, like a SIL3112, to do the SATA. The Nforce2 based boards might be done that way. The VIA ones, might have SATA on the Southbridge. For VIA Southbridges, you have to install a jumper on the back of the SATA drive, the "Force 150" jumper. The older VIA Southbridges with SATA, don't negotiate with SATA 3Gbit/sec drives properly, so the drive has to be jumpered down to 1.5Gbit/sec. Some drives don't have jumpers, in which case, you need to use a software program to change drive settings. And then you need a more modern motherboard, something with a real 3Gbit/sec interface, to be guaranteed to be able to change the drive settings. Drives like Seagate, make this easier, as there is a "Force 150" jumper on the back. HTH, Paul |
#3
|
|||
|
|||
462 m/b with sata ?
fender62 wrote:
i have am athlon 2400 cpu, id like to find a used m/b that has sata instead of ide, whats a good motherboard Socket A/ Socket 462 that has sata that i might find used on fleabay. Use the search engine here. http://www.motherboards.org/mobot/ Set Socket to "Socket A (462)" Set SATA to 1.5 gigabits per second, as 3.0 for that vintage is unlikely. I got a list of 215 motherboards. Now, some of those, will have a separate chip, like a SIL3112, to do the SATA. The Nforce2 based boards might be done that way. The VIA ones, might have SATA on the Southbridge. For VIA Southbridges, you have to install a jumper on the back of the SATA drive, the "Force 150" jumper. The older VIA Southbridges with SATA, don't negotiate with SATA 3Gbit/sec drives properly, so the drive has to be jumpered down to 1.5Gbit/sec. Some drives don't have jumpers, in which case, you need to use a software program to change drive settings. And then you need a more modern motherboard, something with a real 3Gbit/sec interface, to be guaranteed to be able to change the drive settings. Drives like Seagate, make this easier, as there is a "Force 150" jumper on the back. HTH, Paul |
#4
|
|||
|
|||
462 m/b with sata ?
Forget used boards,most likely they are worn out or out-dated..Instead,
look for refurbished,if you want to save a few dollars.A good site for what youre looking for: http://www.spartentech.com They have new,used,refurbished, boards,as they also have "Take-off" processors,some 1/8 original cost.. "fender62" wrote: i have am athlon 2400 cpu, id like to find a used m/b that has sata instead of ide, whats a good motherboard Socket A/ Socket 462 that has sata that i might find used on fleabay. -- fender62 |
#5
|
|||
|
|||
462 m/b with sata ?
Forget used boards,most likely they are worn out or out-dated..Instead,
look for refurbished,if you want to save a few dollars.A good site for what youre looking for: http://www.spartentech.com They have new,used,refurbished, boards,as they also have "Take-off" processors,some 1/8 original cost.. "fender62" wrote: i have am athlon 2400 cpu, id like to find a used m/b that has sata instead of ide, whats a good motherboard Socket A/ Socket 462 that has sata that i might find used on fleabay. -- fender62 |
#6
|
|||
|
|||
462 m/b with sata ?
That link should be http://www.spartantech.com/
SC Tom "Andrew E." wrote in message ... Forget used boards,most likely they are worn out or out-dated..Instead, look for refurbished,if you want to save a few dollars.A good site for what youre looking for: http://www.spartentech.com They have new,used,refurbished, boards,as they also have "Take-off" processors,some 1/8 original cost.. "fender62" wrote: i have am athlon 2400 cpu, id like to find a used m/b that has sata instead of ide, whats a good motherboard Socket A/ Socket 462 that has sata that i might find used on fleabay. -- fender62 |
#7
|
|||
|
|||
462 m/b with sata ?
That link should be http://www.spartantech.com/ SC Tom "Andrew E." wrote in message ... Forget used boards,most likely they are worn out or out-dated..Instead, look for refurbished,if you want to save a few dollars.A good site for what youre looking for: http://www.spartentech.com They have new,used,refurbished, boards,as they also have "Take-off" processors,some 1/8 original cost.. "fender62" wrote: i have am athlon 2400 cpu, id like to find a used m/b that has sata instead of ide, whats a good motherboard Socket A/ Socket 462 that has sata that i might find used on fleabay. -- fender62 |
Thread Tools | |
Display Modes | |
|
|