A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Hardware and Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Nec usb2 card with no usb2 speed?



 
 
Thread Tools Display Modes
  #1  
Old January 22nd 05, 08:39 PM
OlaL
external usenet poster
 
Posts: n/a
Default Nec usb2 card with no usb2 speed?

Hello.
I recently bought a "Nec Usb 2.0 PCI Host Adapter" for my stationary pc.
I have Win XP service pack 2. Before installation of usb2 card, I had 4 usb1
ports, 2 on back, 2 in front. I installed the pci card, restarted. Windows
automatically installed drivers (from where I wonder? And how does it know
it´s usb2?) I then try to use a usb2 storage device...Windows tells me: "This
device could operate much faster...click this for more info..." I thought
windows maybe searched for the correct drivers before it installed. I then
try to install from the driver-cd which came with the card. The installer
from cd tells me that it has installed the correct drivers for the Nec usb2
card. I restart and try the usb2 128 memory card again. I clock a
file-transfer: Still 12mBit !?? In the device manager, every
usb-hub-controller tells me there is no problem, but what should I do?
The usb2 card DOES NOT operate at 480 mbps. Can anyone help me?
-Ola
Ads
  #2  
Old January 22nd 05, 08:50 PM
Jim Macklin
external usenet poster
 
Posts: n/a
Default Nec usb2 card with no usb2 speed?

Use Device Manager to remove ALL USB ports, hubs and
controllers, then reboot.


--
The people think the Constitution protects their rights;
But government sees it as an obstacle to be overcome.


"OlaL" wrote in message
...
| Hello.
| I recently bought a "Nec Usb 2.0 PCI Host Adapter" for my
stationary pc.
| I have Win XP service pack 2. Before installation of usb2
card, I had 4 usb1
| ports, 2 on back, 2 in front. I installed the pci card,
restarted. Windows
| automatically installed drivers (from where I wonder? And
how does it know
| it´s usb2?) I then try to use a usb2 storage
device...Windows tells me: "This
| device could operate much faster...click this for more
info..." I thought
| windows maybe searched for the correct drivers before it
installed. I then
| try to install from the driver-cd which came with the
card. The installer
| from cd tells me that it has installed the correct drivers
for the Nec usb2
| card. I restart and try the usb2 128 memory card again. I
clock a
| file-transfer: Still 12mBit !?? In the device manager,
every
| usb-hub-controller tells me there is no problem, but what
should I do?
| The usb2 card DOES NOT operate at 480 mbps. Can anyone
help me?
| -Ola


  #3  
Old January 23rd 05, 02:29 AM
Not Me
external usenet poster
 
Posts: n/a
Default Nec usb2 card with no usb2 speed?

Also, be certain that you have plugged the 128MB Jump Drive, Thumb
Drive, Flash Drive, Mini Drive, or whatever, into a jack on the back of
the new USB 2.0 PCI card. My point: the new card does not upgrade your
previous USB jacks or devices.
Gene K

Jim Macklin wrote:
Use Device Manager to remove ALL USB ports, hubs and
controllers, then reboot.


  #4  
Old January 23rd 05, 08:12 PM
Yves Leclerc
external usenet poster
 
Posts: n/a
Default Nec usb2 card with no usb2 speed?

As said before, any USB ports that were in your system, before you added the
USB 2.0 card, will only work on USB 1.1 speeds. Any ports directly on the
USB 2.0 card should also work at USB 2.0 speeds.

As for the drivers, Microsoft, and Intel, had made the drivers "standard"
in Windows SP1 update (and now in SP2).


"Jim Macklin" wrote in message
...
Use Device Manager to remove ALL USB ports, hubs and
controllers, then reboot.


--
The people think the Constitution protects their rights;
But government sees it as an obstacle to be overcome.


"OlaL" wrote in message
...
| Hello.
| I recently bought a "Nec Usb 2.0 PCI Host Adapter" for my
stationary pc.
| I have Win XP service pack 2. Before installation of usb2
card, I had 4 usb1
| ports, 2 on back, 2 in front. I installed the pci card,
restarted. Windows
| automatically installed drivers (from where I wonder? And
how does it know
| it´s usb2?) I then try to use a usb2 storage
device...Windows tells me: "This
| device could operate much faster...click this for more
info..." I thought
| windows maybe searched for the correct drivers before it
installed. I then
| try to install from the driver-cd which came with the
card. The installer
| from cd tells me that it has installed the correct drivers
for the Nec usb2
| card. I restart and try the usb2 128 memory card again. I
clock a
| file-transfer: Still 12mBit !?? In the device manager,
every
| usb-hub-controller tells me there is no problem, but what
should I do?
| The usb2 card DOES NOT operate at 480 mbps. Can anyone
help me?
| -Ola




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing Hi-Speed USB 2.0 PCI Host Card: D.I.D. (Damsel in Distr PNWgirl Hardware and Windows XP 31 January 11th 05 07:42 PM
Trying to install Video Card Denaluu Hardware and Windows XP 6 January 11th 05 09:41 AM
USB2 v/s USB in XP - help? yabbadoo Hardware and Windows XP 7 January 5th 05 05:11 PM
Speed of USB2 - MORE!! Pat The Basics 0 December 23rd 04 09:38 PM
usb2 capture card helo! Deb Hardware and Windows XP 1 September 14th 04 11:35 PM






All times are GMT +1. The time now is 11:27 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.