If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
MS DV Camera and VCR video sizes no go
Hi,
We need to change the default 360x288 picture size on our Canopus ADVC-1394 capture card to 720x568. Trouble is the MS DV Camera and VCR driver does not allow this to happen. Even in Windows Explorer preview, the driver displays the small size only. Does anyone know a workaround, or a replacement driver that will allow changes to be made to video size? We're using XP Home SP1 (Don't like SP2) Thank you. TJ |
Ads |
#2
|
|||
|
|||
MS DV Camera and VCR video sizes no go
Have you tried any video editing software? Also, do you plan on
capturing the video directly onto the computer or are you just transfering video that is already on the camera to the computer? If the latter is the case, you need to adjust the settings on the camera itself, and if you can't get it to that resolution, you can use software to interpolate the image ----- Nathan McNulty Swap gmail with name for email T Jones wrote: Hi, We need to change the default 360x288 picture size on our Canopus ADVC-1394 capture card to 720x568. Trouble is the MS DV Camera and VCR driver does not allow this to happen. Even in Windows Explorer preview, the driver displays the small size only. Does anyone know a workaround, or a replacement driver that will allow changes to be made to video size? We're using XP Home SP1 (Don't like SP2) Thank you. TJ |
Thread Tools | |
Display Modes | |
|
|