If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Has anyone ever come across this?
It sounds like ZONE ALARM is blocking the ports necessary
for the 2 PCs to pass Authentication and logon information. You can try getting around the problem by executing this NET USE command on PC1 from the command line: NET USE o: \\PC2\C$ pwd (Password of the local administrator on PC2) /USER:PC2\administrator This tells PC2 that you are connecting to it using the userid and password of its local administrator. Hope this works for you. Don Carriere -----Original Message----- Hi All Previously posted on 9/6/04 but no luck, has anyone come across the same? Now just 2 Pcs, Win XP Pro, SP1 , all updates, Zone Alarm Pro. PC1 has ADSL connection with 1 signon - Administrator; and a shared Office Jet. PC2 has shared connection, 1 Admin/4 user signon and Lazer printer. From PC2 I can access PC1- internet, shares and printer without a problem. From PC1 I have to logon to PC2 to have any shares, using the format Administrator\PC2 - pwd. Not only that ,but if I try to print to the lazer on PC2 I get a "Device not accessible" type of message unlessl I've previouly accessed a drive on PC2. I've checked all the stuff up to Computer Management level and Security but can't find the difference. I've searched here and other forums and also the knowledge base - even Google, but nothing quite the same and no fix. The key to this problem is having to access a folder share on PC2 before you can print to the lazer. "I think" Does anyone have the magic wand? Cheers Jimmy . |
Ads |
Thread Tools | |
Display Modes | |
|
|