If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
No Audio in messenger 6.1.0207
Bosco
I had a similar problem. This is what I did. I made certain that I had the latest software upgrades for my old linksys (BEFSR41 V2) to July 2003 level. Prior to this upgrade I believe that Universal Plug and Play (UPnP) was not well enough defined. I turned on UPnP and put in a few pass through addresses for the router, and suddenly, my systems were working through the router. (You may have to power off every piece of equipment and re power them to ensure that new ip sessions are establised. From messenger tools--connection, the message at the bottom of the panel will tell you if UPnP is active. Try again. I can generate a word document with print screens to show my router settings. -----Original Message----- I'm running Win XP Pro, NAV 2003 and NPFW 2003. I was unable to view webcam with the original version of messenger shipped with Xp so had to upgrade to 6.1. I now have video, can chat, but no audio at my end. I can neither hear nor speak through messenger, though all checks out in the audio setup wizard. I use a Linksys modem router with a built in firewall, have checked UPnP, firmware update, set a static IP and made appropriate changes to the ports in the router and disabled NAV firewall. I have contacted my ISP who could not help. All to no affect...Will try a dialup modem soon but none installed yet. I have tested this system with a friends help, his messenger is also 6.1.027, he uses Win2K with a dialup modem and it works fine when he contacts other friends, but he can not hear me and I can't hear him.. Anything else I might try??? Thanks Bosco... . |
Ads |
Thread Tools | |
Display Modes | |
|
|