If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Couple of Win-10 questions
I'm pretty familiar with Win7-Pro, but just got my first Win-10-Pro
system DELL XPS-8930 Win-10-Pro 10.0.15063 Question 1: Where is the control to set the maximum download speed of the connection (I want to use a "throttled" or "metered" connection to limit update downloads.) It is not in the Windows Update settings or advanced settings as some web sites describe. Question 2: Update seems to take forever. After listing four updates, including a cumulative one, it took hours to download them. It then went into "preparing to install," where it is now at 12% after about four hours. Question 3:: I looked at the windows error reporting. That was today 3/21/18 at 7:09 PM as shown on the desktop clock. The last error listed says it was 03/21/18 at 7:50 PM. There were several others with times after the actual time. I know, forecasts G. I'd appreciate any wisdom from you folks. -dan z- -- Someone who thinks logically provides a nice contrast to the real world. (Anonymous) |
Ads |
#2
|
|||
|
|||
Couple of Win-10 questions
"slate_leeper" wrote in message
... I'm pretty familiar with Win7-Pro, but just got my first Win-10-Pro system DELL XPS-8930 Win-10-Pro 10.0.15063 Question 1: Where is the control to set the maximum download speed of the connection (I want to use a "throttled" or "metered" connection to limit update downloads.) It is not in the Windows Update settings or advanced settings as some web sites describe. Question 2: Update seems to take forever. After listing four updates, including a cumulative one, it took hours to download them. It then went into "preparing to install," where it is now at 12% after about four hours. Question 3:: I looked at the windows error reporting. That was today 3/21/18 at 7:09 PM as shown on the desktop clock. The last error listed says it was 03/21/18 at 7:50 PM. There were several others with times after the actual time. I know, forecasts G. I'd appreciate any wisdom from you folks. -dan z- Dan, You are running the "Creators Update" version 1703. The next version is 1709 which is the Fall Creators update. 1. Do a search from the lower left corner near the Start icon. You may have a a Search window or a magnifier icon. Just enter Dial-Up and that will take you to the settings page and related setting on the right side. 2. Difficult to say why since you didn't state what kind of service you are using but sounds like phone line. Could be lousy DSL, A-DSL or whatever but open a browser window and do a search for Speed Test. I like the SpeakEasy site: https://www.speakeasy.net/speedtest/ 3. Double click on the time and date on the task bar (far right side) and that will open a window with time, date and calendar. At the bottom of that window, click on the Date and time settings to bring up the next window where you can adjust settings for everything related. Time zone, date and time can be set. I have seen the same thing as you but have never looked into exactly why or what caused it. You could type Reliability into the search window and that will bring up historical graph and text entries at the bottom of the graph. Pick a date and then see if you can find any entries that relate to time. -- Bob S. |
#3
|
|||
|
|||
Couple of Win-10 questions
On Wed, 21 Mar 2018 20:31:51 -0400, slate_leeper
wrote: I'm pretty familiar with Win7-Pro, but just got my first Win-10-Pro system DELL XPS-8930 Win-10-Pro 10.0.15063 Question 1: Where is the control to set the maximum download speed of the connection (I want to use a "throttled" or "metered" connection to limit update downloads.) It is not in the Windows Update settings or advanced settings as some web sites describe. Question 2: Update seems to take forever. After listing four updates, including a cumulative one, it took hours to download them. It then went into "preparing to install," where it is now at 12% after about four hours. Question 3:: I looked at the windows error reporting. That was today 3/21/18 at 7:09 PM as shown on the desktop clock. That could be your problem. The date is incorrect. There is no 21st month. The last error listed says it was 03/21/18 at 7:50 PM. There were several others with times after the actual time. I know, forecasts G. I'd appreciate any wisdom from you folks. Fix the date first. -dan z- |
#4
|
|||
|
|||
Couple of Win-10 questions
On Thu, 22 Mar 2018 17:11:20 +1100, Lucifer Morningstar
wrote: On Wed, 21 Mar 2018 20:31:51 -0400, slate_leeper wrote: I'm pretty familiar with Win7-Pro, but just got my first Win-10-Pro system DELL XPS-8930 Win-10-Pro 10.0.15063 Question 1: Where is the control to set the maximum download speed of the connection (I want to use a "throttled" or "metered" connection to limit update downloads.) It is not in the Windows Update settings or advanced settings as some web sites describe. Question 2: Update seems to take forever. After listing four updates, including a cumulative one, it took hours to download them. It then went into "preparing to install," where it is now at 12% after about four hours. Question 3:: I looked at the windows error reporting. That was today 3/21/18 at 7:09 PM as shown on the desktop clock. That could be your problem. The date is incorrect. There is no 21st month. Month-Day-Year is the American date system and has been for centuries. If you look at the Header information you will see that his time zone is -0400 hrs. That time zone indicates that he could on the east coast of America. Personally, I prefer the Year-Month-Day date system. |
#5
|
|||
|
|||
Couple of Win-10 questions
On Thu, 22 Mar 2018 17:11:20 +1100, Lucifer Morningstar
wrote: On Wed, 21 Mar 2018 20:31:51 -0400, slate_leeper wrote: I'm pretty familiar with Win7-Pro, but just got my first Win-10-Pro system DELL XPS-8930 Win-10-Pro 10.0.15063 Question 1: Where is the control to set the maximum download speed of the connection (I want to use a "throttled" or "metered" connection to limit update downloads.) It is not in the Windows Update settings or advanced settings as some web sites describe. Question 2: Update seems to take forever. After listing four updates, including a cumulative one, it took hours to download them. It then went into "preparing to install," where it is now at 12% after about four hours. Question 3:: I looked at the windows error reporting. That was today 3/21/18 at 7:09 PM as shown on the desktop clock. That could be your problem. The date is incorrect. There is no 21st month. The last error listed says it was 03/21/18 at 7:50 PM. There were several others with times after the actual time. I know, forecasts G. I'd appreciate any wisdom from you folks. Fix the date first. -dan z- Thanks, Lucifer, but the date is correct (U.S. standards): March 21, 2018. -- Someone who thinks logically provides a nice contrast to the real world. (Anonymous) |
#6
|
|||
|
|||
Couple of Win-10 questions
On 3/22/2018 2:11 AM, Lucifer Morningstar wrote:
On Wed, 21 Mar 2018 20:31:51 -0400, slate_leeper wrote: I'm pretty familiar with Win7-Pro, but just got my first Win-10-Pro system DELL XPS-8930 Win-10-Pro 10.0.15063 Question 1: Where is the control to set the maximum download speed of the connection (I want to use a "throttled" or "metered" connection to limit update downloads.) It is not in the Windows Update settings or advanced settings as some web sites describe. Question 2: Update seems to take forever. After listing four updates, including a cumulative one, it took hours to download them. It then went into "preparing to install," where it is now at 12% after about four hours. Question 3:: I looked at the windows error reporting. That was today 3/21/18 at 7:09 PM as shown on the desktop clock. That could be your problem. The date is incorrect. There is no 21st month. The last error listed says it was 03/21/18 at 7:50 PM. There were several others with times after the actual time. I know, forecasts G. I'd appreciate any wisdom from you folks. Fix the date first. -dan z- Depends on whether you are using the European dates or the US. 03/21/18 on a European configured systems it would be as you say there is no 21st month. However in a system configured to the US system 03/21/18 is March 21, 2018 Or yesterdays date. -- 2018: The year we learn to play the great game of Euchre |
#7
|
|||
|
|||
Couple of Win-10 questions
Dan, You are running the "Creators Update" version 1703. The next version is 1709 which is the Fall Creators update. 1. Do a search from the lower left corner near the Start icon. You may have a a Search window or a magnifier icon. Just enter Dial-Up and that will take you to the settings page and related setting on the right side. 2. Difficult to say why since you didn't state what kind of service you are using but sounds like phone line. Could be lousy DSL, A-DSL or whatever but open a browser window and do a search for Speed Test. I like the SpeakEasy site: https://www.speakeasy.net/speedtest/ 3. Double click on the time and date on the task bar (far right side) and that will open a window with time, date and calendar. At the bottom of that window, click on the Date and time settings to bring up the next window where you can adjust settings for everything related. Time zone, date and time can be set. I have seen the same thing as you but have never looked into exactly why or what caused it. You could type Reliability into the search window and that will bring up historical graph and text entries at the bottom of the graph. Pick a date and then see if you can find any entries that relate to time. Thanks for all this info, Bob. Today is full day with vet and doctor appointments, so I probably won't get back to the Win-10 machine until tomorrow. problem 2 (updates): Connected via ComCast. The Win7 machine consistently shows download speeds of 456 kbps. (NetPerSec graph and averages). I used to live in the country with only satellite service. A max of 66 kbps, and usually much less. That is why I have not gone to Win-10 before now. I think that problem 2 is fixed, though. I stumbled upon Windows Update Troubleshooter. It said corrupted data base and also some registry errors (on a brand new machine?). I let it fix both, and update APPEARS to be working OK now. I'll report back on problems 1 and 3 after I get more time on the machine. Someone needs to write a book on Win-10 basics. But I'm guessing it would be obsolete long before it could even be printed. -dan z- -- Someone who thinks logically provides a nice contrast to the real world. (Anonymous) |
#8
|
|||
|
|||
Couple of Win-10 questions
On Thu, 22 Mar 2018 09:15:37 -0400, slate_leeper
wrote: Connected via ComCast. The Win7 machine consistently shows download speeds of 456 kbps. (NetPerSec graph and averages). Comcast doesn't have any service offerings that are that low, so something is seriously wrong. Browse to http://192.168.100.1 (most cable modems have a web server at that address) and check your signal levels. Downstream signal should be within +-15dBmV, or ideally within +-10dBmV. Zero or slightly positive is where you want to be. Downstream SNR should be at least 35dB, and 40-45dB would be better. Higher is better. Upstream signal should be less than about 52dBmV. 45 or 40 or even 35dBmV would be better. Lower is better. |
#9
|
|||
|
|||
Couple of Win-10 questions
On Wed, 21 Mar 2018 20:53:23 -0400, "Bob_S" wrote:
"slate_leeper" wrote in message .. . I'm pretty familiar with Win7-Pro, but just got my first Win-10-Pro system DELL XPS-8930 Win-10-Pro 10.0.15063 Question 1: Where is the control to set the maximum download speed of the connection (I want to use a "throttled" or "metered" connection to limit update downloads.) It is not in the Windows Update settings or advanced settings as some web sites describe. Question 2: Update seems to take forever. After listing four updates, including a cumulative one, it took hours to download them. It then went into "preparing to install," where it is now at 12% after about four hours. Question 3:: I looked at the windows error reporting. That was today 3/21/18 at 7:09 PM as shown on the desktop clock. The last error listed says it was 03/21/18 at 7:50 PM. There were several others with times after the actual time. I know, forecasts G. I'd appreciate any wisdom from you folks. -dan z- Dan, You are running the "Creators Update" version 1703. The next version is 1709 which is the Fall Creators update. 1. Do a search from the lower left corner near the Start icon. You may have a a Search window or a magnifier icon. Just enter Dial-Up and that will take you to the settings page and related setting on the right side. I did finally find a web page that matches my version of Win-10 https://winaero.com/blog/ethernet-co...ed-windows-10/ 3. Double click on the time and date on the task bar (far right side) and that will open a window with time, date and calendar. At the bottom of that window, click on the Date and time settings to bring up the next window where you can adjust settings for everything related. Time zone, date and time can be set. I have seen the same thing as you but have never looked into exactly why or what caused it. Doing this I discovered it was set for central time even though I originally set it for eastern. Strange. Still doesn't explain (to me anyway) why the log's times would be almost an hour ahead of the system time. You could type Reliability into the search window and that will bring up historical graph and text entries at the bottom of the graph. Pick a date and then see if you can find any entries that relate to time. Nothing shows other than a bunch of "successful" things apparently related to Windows Update. -dan z- -- Someone who thinks logically provides a nice contrast to the real world. (Anonymous) |
Thread Tools | |
Display Modes | Rate This Thread |
|
|