A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Printing and Faxing with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

lexmark x85 compatability with xp



 
 
Thread Tools Display Modes
  #1  
Old April 30th 04, 01:38 PM
malden117
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!

Ads
  #2  
Old April 30th 04, 01:38 PM
Cari \(MS MVP\)
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from www.lexmark.com
Install the software and do NOT reconnect the printer until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



  #3  
Old April 30th 04, 01:38 PM
Cari \(MS MVP\)
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from www.lexmark.com
Install the software and do NOT reconnect the printer until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



  #4  
Old May 1st 04, 12:49 AM
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.

  #5  
Old May 1st 04, 01:25 AM
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.

  #6  
Old May 1st 04, 01:25 AM
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.

  #7  
Old May 1st 04, 05:31 AM
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.

  #8  
Old May 1st 04, 05:31 AM
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.

  #9  
Old May 1st 04, 06:58 AM
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.

  #10  
Old May 1st 04, 07:04 AM
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.

  #11  
Old May 1st 04, 08:30 AM
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.

  #12  
Old May 3rd 04, 08:42 PM
Cari \(MS-MVP\)
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

Look for drivers from either the motherboard manufacturer's website or from
the PC manufacturer's website.

--
Cari
MS-MVP Windows Technologies - Printing/Imaging/Hardware
www.coribright.com

wrote in message
...
yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.



  #13  
Old May 4th 04, 03:01 AM
Cari \(MS-MVP\)
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

Look for drivers from either the motherboard manufacturer's website or from
the PC manufacturer's website.

--
Cari
MS-MVP Windows Technologies - Printing/Imaging/Hardware
www.coribright.com

wrote in message
...
yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.



  #14  
Old May 4th 04, 03:15 AM
Cari \(MS-MVP\)
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

Look for drivers from either the motherboard manufacturer's website or from
the PC manufacturer's website.

--
Cari
MS-MVP Windows Technologies - Printing/Imaging/Hardware
www.coribright.com

wrote in message
...
yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.



  #15  
Old May 4th 04, 05:03 AM
Cari \(MS-MVP\)
external usenet poster
 
Posts: n/a
Default lexmark x85 compatability with xp

Look for drivers from either the motherboard manufacturer's website or from
the PC manufacturer's website.

--
Cari
MS-MVP Windows Technologies - Printing/Imaging/Hardware
www.coribright.com

wrote in message
...
yes i did and i did a complete reinstall of xp
i connected the cable when i was promted to the printer
works on it's own as a copier can test print from printer
controls only not from computer
i downloaded new drivers from lexmark after i uninstalled
origianal drivers and still nothing.'

lexmark seems to think i have a problem with my usb port
but it says it's working properly
they mentioned updating usb drivers or chip set drivers
but can't figure out which ones to install .
i have a 440 intel chip set family processor
but theres 8 different ones to choose from and i really
dont want to screw them up?
-----Original Message-----
Ah but you did not uninstall correctly!

Disconnect printer from PC...

Follow Bruce Sanderson's instructions at
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

Do NOT miss out steps 14 thru 16!

After cleanup reboot. Download a new set of divers from

www.lexmark.com
Install the software and do NOT reconnect the printer

until the software
tells you to do so.
--
Cari (MS-MVP Windows Client - Printing, Imaging &

Hardware)
www.coribright.com

"malden117" wrote in message
...
i recently upgraded to xp and now my lexmark x85 all in
one printer can no longer comunnicate with my computer.
i searched lemark home and down loaded update but still
nothing , i downloaded patch and still nothing,lexmark
referd me to intel for chipset driver update but their

no
help they no longer offer support and refered me to
microsoft but i cannot find help can someone please

help
me? "problem communicating with the printer"

and yes i check the cables and uninstalled and
reinstalled drivers but nothing!



.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 03:26 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.