If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
wireless mini pci card problem
Hi,
I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John |
Ads |
#2
|
|||
|
|||
wireless mini pci card problem
Did you try a different PCI slot if available?
"traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John |
#3
|
|||
|
|||
wireless mini pci card problem
Did you try a different PCI slot if available?
"traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John |
#4
|
|||
|
|||
wireless mini pci card problem
Oh. I'm sorry it is a laptop and only the one slot for mini pci and the 2
slots for sodimm. John "Rich Barry" wrote: Did you try a different PCI slot if available? "traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John . |
#5
|
|||
|
|||
wireless mini pci card problem
Oh. I'm sorry it is a laptop and only the one slot for mini pci and the 2
slots for sodimm. John "Rich Barry" wrote: Did you try a different PCI slot if available? "traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John . |
#6
|
|||
|
|||
wireless mini pci card problem
"traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John Anything can go bad. If the notebook boots fine with it out, that's more than likely your problem. Have you downloaded and installed the latest drivers for it? Do you have a different type of card you could try in that slot to eliminate the slot as being faulty? Or do you have access to another wireless card to try in it? A quick search on Google for that error puts the card at fault in most cases. -- SC Tom |
#7
|
|||
|
|||
wireless mini pci card problem
"traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John Anything can go bad. If the notebook boots fine with it out, that's more than likely your problem. Have you downloaded and installed the latest drivers for it? Do you have a different type of card you could try in that slot to eliminate the slot as being faulty? Or do you have access to another wireless card to try in it? A quick search on Google for that error puts the card at fault in most cases. -- SC Tom |
#8
|
|||
|
|||
wireless mini pci card problem
Hi and thanks, unfortunately I don't have any other mini cards. I guess I can
invest 4.99 on ebay for an attempt at a used mini card. I tried the new drivers from Sony etc. Thanks, John "SC Tom" wrote: "traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John Anything can go bad. If the notebook boots fine with it out, that's more than likely your problem. Have you downloaded and installed the latest drivers for it? Do you have a different type of card you could try in that slot to eliminate the slot as being faulty? Or do you have access to another wireless card to try in it? A quick search on Google for that error puts the card at fault in most cases. -- SC Tom . |
#9
|
|||
|
|||
wireless mini pci card problem
Hi and thanks, unfortunately I don't have any other mini cards. I guess I can
invest 4.99 on ebay for an attempt at a used mini card. I tried the new drivers from Sony etc. Thanks, John "SC Tom" wrote: "traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John Anything can go bad. If the notebook boots fine with it out, that's more than likely your problem. Have you downloaded and installed the latest drivers for it? Do you have a different type of card you could try in that slot to eliminate the slot as being faulty? Or do you have access to another wireless card to try in it? A quick search on Google for that error puts the card at fault in most cases. -- SC Tom . |
#10
|
|||
|
|||
wireless mini pci card problem
traumajohn wrote:
Hi and thanks, unfortunately I don't have any other mini cards. I guess I can invest 4.99 on ebay for an attempt at a used mini card. I tried the new drivers from Sony etc. Thanks, John "SC Tom" wrote: "traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John Anything can go bad. If the notebook boots fine with it out, that's more than likely your problem. Have you downloaded and installed the latest drivers for it? Do you have a different type of card you could try in that slot to eliminate the slot as being faulty? Or do you have access to another wireless card to try in it? A quick search on Google for that error puts the card at fault in most cases. -- SC Tom . newegg has some fairly inexpensive wireless adapters (USB) for about 30.00 incl. shipping. |
#11
|
|||
|
|||
wireless mini pci card problem
traumajohn wrote:
Hi and thanks, unfortunately I don't have any other mini cards. I guess I can invest 4.99 on ebay for an attempt at a used mini card. I tried the new drivers from Sony etc. Thanks, John "SC Tom" wrote: "traumajohn" wrote in message ... Hi, I have a Sony VAIO with windows xp home. It had been having problems with the mini pci wireless card. In devices it showed code 10. I pulled it out and put it back in and during boot up I got the error... Conflict PCI Network in slot 2 BUS 00 Device 07 Function 00. I can boot past that by hitting f1. Then, I started getting a fatal error memory parity problem. I had recently installed 1gb x2 kingston and it booted fine a few times, then I got the blue screen with the conflict error. I pulled out the new memory and installed teh previous memory and got the same error. I pulled the mini pci card out and it resolved. I know this might be a duh but could the card have gone bad? Or is there a way to fix the conflict? Thanks, John Anything can go bad. If the notebook boots fine with it out, that's more than likely your problem. Have you downloaded and installed the latest drivers for it? Do you have a different type of card you could try in that slot to eliminate the slot as being faulty? Or do you have access to another wireless card to try in it? A quick search on Google for that error puts the card at fault in most cases. -- SC Tom . newegg has some fairly inexpensive wireless adapters (USB) for about 30.00 incl. shipping. |
Thread Tools | |
Display Modes | |
|
|