A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Hardware and Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Power Control Unit



 
 
Thread Tools Display Modes
  #1  
Old April 30th 09, 01:50 PM posted to microsoft.public.windowsxp.hardware
Daave
external usenet poster
 
Posts: 3,568
Default Power Control Unit

A client of mine has had a certain type of power surge protector where
each device can be powered off in addition to turning everything off at
once. It's flat and he sets his monitor on top of it. Here is a photo of
it:

http://www.amazon.com/gp/product/ima...&s=electronics

(It's no longer available unless he goes to Ebay.)

Although the four switches on the left all still work, the main switch
on the right doesn't. I doubt this is worth getting repaired. I'd like
to suggest a replacement, but all I can find are the usual power strips.
If anyone has any suggestions, that would be great.


Ads
  #2  
Old April 30th 09, 02:29 PM posted to microsoft.public.windowsxp.hardware
SC Tom[_3_]
external usenet poster
 
Posts: 4,089
Default Power Control Unit


"Daave" wrote in message
...
A client of mine has had a certain type of power surge protector where each
device can be powered off in addition to turning everything off at once.
It's flat and he sets his monitor on top of it. Here is a photo of it:

http://www.amazon.com/gp/product/ima...&s=electronics

(It's no longer available unless he goes to Ebay.)

Although the four switches on the left all still work, the main switch on
the right doesn't. I doubt this is worth getting repaired. I'd like to
suggest a replacement, but all I can find are the usual power strips. If
anyone has any suggestions, that would be great.


In lieu of finding/buying a new one, you might try Radio Shack or one of the
on-line parts places for a replacement switch. I wouldn't think that it
would be that hard to replace, or that hard to find. I had the same unit
years ago, IIRC, and they are simple push-button switches.

SC Tom


  #3  
Old April 30th 09, 02:43 PM posted to microsoft.public.windowsxp.hardware
Daave
external usenet poster
 
Posts: 3,568
Default Power Control Unit

SC Tom wrote:
"Daave" wrote in message
...
A client of mine has had a certain type of power surge protector
where each device can be powered off in addition to turning
everything off at once. It's flat and he sets his monitor on top of
it. Here is a photo of it:
http://www.amazon.com/gp/product/ima...&s=electronics

(It's no longer available unless he goes to Ebay.)

Although the four switches on the left all still work, the main
switch on the right doesn't. I doubt this is worth getting repaired.
I'd like to suggest a replacement, but all I can find are the usual
power strips. If anyone has any suggestions, that would be great.


In lieu of finding/buying a new one, you might try Radio Shack or one
of the on-line parts places for a replacement switch. I wouldn't
think that it would be that hard to replace, or that hard to find. I
had the same unit years ago, IIRC, and they are simple push-button
switches.


That's the thing. So far, I've looked at NewEgg and MicroCenter and have
come up empty. But now that you've mentioned Radio Shack, I wonder if
this imight fit the bill:

http://www.radioshack.com/product/in...ductId=2362004

Thanks for the suggestion!


  #4  
Old April 30th 09, 04:19 PM posted to microsoft.public.windowsxp.hardware
SC Tom[_3_]
external usenet poster
 
Posts: 4,089
Default Power Control Unit


"Daave" wrote in message
...
SC Tom wrote:
"Daave" wrote in message
...
A client of mine has had a certain type of power surge protector
where each device can be powered off in addition to turning
everything off at once. It's flat and he sets his monitor on top of
it. Here is a photo of it:
http://www.amazon.com/gp/product/ima...&s=electronics

(It's no longer available unless he goes to Ebay.)

Although the four switches on the left all still work, the main
switch on the right doesn't. I doubt this is worth getting repaired.
I'd like to suggest a replacement, but all I can find are the usual
power strips. If anyone has any suggestions, that would be great.


In lieu of finding/buying a new one, you might try Radio Shack or one
of the on-line parts places for a replacement switch. I wouldn't
think that it would be that hard to replace, or that hard to find. I
had the same unit years ago, IIRC, and they are simple push-button
switches.


That's the thing. So far, I've looked at NewEgg and MicroCenter and have
come up empty. But now that you've mentioned Radio Shack, I wonder if this
imight fit the bill:

http://www.radioshack.com/product/in...ductId=2362004

Thanks for the suggestion!

Although that would probably fill the bill, that wasn't exactly what I had
in mind. I meant the single on/off switch that isn't working. But for $30,
what the heck, just get a new unit :-) That way the client won't have to
worry about another switch failing.



  #5  
Old April 30th 09, 05:40 PM posted to microsoft.public.windowsxp.hardware
Daave
external usenet poster
 
Posts: 3,568
Default Power Control Unit

SC Tom wrote:
"Daave" wrote in message
...
SC Tom wrote:
"Daave" wrote in message
...
A client of mine has had a certain type of power surge protector
where each device can be powered off in addition to turning
everything off at once. It's flat and he sets his monitor on top of
it. Here is a photo of it:
http://www.amazon.com/gp/product/ima...&s=electronics

(It's no longer available unless he goes to Ebay.)

Although the four switches on the left all still work, the main
switch on the right doesn't. I doubt this is worth getting
repaired. I'd like to suggest a replacement, but all I can find
are the usual power strips. If anyone has any suggestions, that
would be great.

In lieu of finding/buying a new one, you might try Radio Shack or
one of the on-line parts places for a replacement switch. I wouldn't
think that it would be that hard to replace, or that hard to find. I
had the same unit years ago, IIRC, and they are simple push-button
switches.


That's the thing. So far, I've looked at NewEgg and MicroCenter and
have come up empty. But now that you've mentioned Radio Shack, I
wonder if this imight fit the bill:

http://www.radioshack.com/product/in...ductId=2362004

Thanks for the suggestion!

Although that would probably fill the bill, that wasn't exactly what
I had in mind. I meant the single on/off switch that isn't working.
But for $30, what the heck, just get a new unit :-) That way the
client won't have to worry about another switch failing.


I figured that's the best thing to do, too. I could either charge him
labor to repair the switch and for the switch itself of just get a whole
new unit. To tell you the truth, even though I feel very comfortable
inside desktops and laptops, I wouldn't want to mess with these types of
units. I certainly wouldn't want to mess with monitors, either! This is
only a side job for me; I wonder how the more seasoned techs handle this
situation.


  #6  
Old April 30th 09, 06:53 PM posted to microsoft.public.windowsxp.hardware
SC Tom[_3_]
external usenet poster
 
Posts: 4,089
Default Power Control Unit


"Daave" wrote in message
...
SC Tom wrote:
"Daave" wrote in message
...
SC Tom wrote:
"Daave" wrote in message
...
A client of mine has had a certain type of power surge protector
where each device can be powered off in addition to turning
everything off at once. It's flat and he sets his monitor on top of
it. Here is a photo of it:
http://www.amazon.com/gp/product/ima...&s=electronics

(It's no longer available unless he goes to Ebay.)

Although the four switches on the left all still work, the main
switch on the right doesn't. I doubt this is worth getting
repaired. I'd like to suggest a replacement, but all I can find
are the usual power strips. If anyone has any suggestions, that
would be great.

In lieu of finding/buying a new one, you might try Radio Shack or
one of the on-line parts places for a replacement switch. I wouldn't
think that it would be that hard to replace, or that hard to find. I
had the same unit years ago, IIRC, and they are simple push-button
switches.

That's the thing. So far, I've looked at NewEgg and MicroCenter and
have come up empty. But now that you've mentioned Radio Shack, I
wonder if this imight fit the bill:

http://www.radioshack.com/product/in...ductId=2362004

Thanks for the suggestion!

Although that would probably fill the bill, that wasn't exactly what
I had in mind. I meant the single on/off switch that isn't working.
But for $30, what the heck, just get a new unit :-) That way the
client won't have to worry about another switch failing.


I figured that's the best thing to do, too. I could either charge him
labor to repair the switch and for the switch itself of just get a whole
new unit. To tell you the truth, even though I feel very comfortable
inside desktops and laptops, I wouldn't want to mess with these types of
units. I certainly wouldn't want to mess with monitors, either! This is
only a side job for me; I wonder how the more seasoned techs handle this
situation.

If it was mine, I probably would have replaced just the switch, but that's
just me. I would rather try and fix something than replace it, even if it's
not cost-effective to do it that way. But then again, I'm retired now, so
it's more of a hobby than anything else. But I did the same thing at work,
be it PC's, monitors, UPS units, what have you. Took a wind-up clock apart
when I was 11 to fix it (and it worked!), and I've been doing things like
that ever since.


  #7  
Old April 30th 09, 08:08 PM posted to microsoft.public.windowsxp.hardware
smlunatick
external usenet poster
 
Posts: 4,866
Default Power Control Unit

On Apr 30, 1:50*pm, "Daave" wrote:
A client of mine has had a certain type of power surge protector where
each device can be powered off in addition to turning everything off at
once. It's flat and he sets his monitor on top of it. Here is a photo of
it:

http://www.amazon.com/gp/product/ima...dp_image_text_....

(It's no longer available unless he goes to Ebay.)

Although the four switches on the left all still work, the main switch
on the right doesn't. I doubt this is worth getting repaired. I'd like
to suggest a replacement, but all I can find are the usual power strips.
If anyone has any suggestions, that would be great.


These are usually described as "under monitor" power control centres.


How about this:

http://www.tripplite.com/en/products...xtModelID=2636

  #8  
Old April 30th 09, 09:06 PM posted to microsoft.public.windowsxp.hardware
Ian D
external usenet poster
 
Posts: 381
Default Power Control Unit


"smlunatick" wrote in message
...
On Apr 30, 1:50 pm, "Daave" wrote:
A client of mine has had a certain type of power surge protector where
each device can be powered off in addition to turning everything off at
once. It's flat and he sets his monitor on top of it. Here is a photo of
it:

http://www.amazon.com/gp/product/ima...dp_image_text_...

(It's no longer available unless he goes to Ebay.)

Although the four switches on the left all still work, the main switch
on the right doesn't. I doubt this is worth getting repaired. I'd like
to suggest a replacement, but all I can find are the usual power strips.
If anyone has any suggestions, that would be great.


These are usually described as "under monitor" power control centres.


How about this:

http://www.tripplite.com/en/products...xtModelID=2636

That's the same unit Radio Shack sell for $10 less.


  #9  
Old June 9th 09, 11:18 AM posted to microsoft.public.windowsxp.hardware
M.I.5¾
external usenet poster
 
Posts: 2,722
Default Power Control Unit


"Mr. Smith" wrote in message
...
On Thu, 30 Apr 2009 08:50:05 -0400, "Daave"
wrote:

A client of mine has had a certain type of power surge protector where
each device can be powered off in addition to turning everything off at
once. It's flat and he sets his monitor on top of it. Here is a photo of
it:

http://www.amazon.com/gp/product/ima...&s=electronics

(It's no longer available unless he goes to Ebay.)

Although the four switches on the left all still work, the main switch
on the right doesn't. I doubt this is worth getting repaired. I'd like
to suggest a replacement, but all I can find are the usual power strips.
If anyone has any suggestions, that would be great.


I suggest you ask whatever you are trying to ask elsewhere. This has
nothing to do with Win XP.


Ignore the resident ****wit. Your question is welcom as the responses
should indicate.

"Mr Smith" is a mentally retarded school child who has delusions that he is
some sort of self appointed newsgroup moderator who can decide what you can
post and what you can't.

He isn't.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 05:21 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.