A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Performance and Maintainance of XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Application will not open Maximized



 
 
Thread Tools Display Modes
  #1  
Old May 13th 09, 06:08 PM posted to microsoft.public.windowsxp.perform_maintain
No_Name
external usenet poster
 
Posts: 12
Default Application will not open Maximized

I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.

I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).

I have also tried start /max application.exe from the command line.
Both of these do not work.

Downloading a 3rd party tool is not an option.

Any suggestions?

Thanks,
Blake
Ads
  #2  
Old May 13th 09, 06:17 PM posted to microsoft.public.windowsxp.perform_maintain
Leonard Grey[_3_]
external usenet poster
 
Posts: 3,048
Default Application will not open Maximized

The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est

wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.

I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).

I have also tried start /max application.exe from the command line.
Both of these do not work.

Downloading a 3rd party tool is not an option.

Any suggestions?

Thanks,
Blake

  #3  
Old May 13th 09, 06:17 PM posted to microsoft.public.windowsxp.perform_maintain
Leonard Grey[_3_]
external usenet poster
 
Posts: 3,048
Default Application will not open Maximized

The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est

wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.

I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).

I have also tried start /max application.exe from the command line.
Both of these do not work.

Downloading a 3rd party tool is not an option.

Any suggestions?

Thanks,
Blake

  #4  
Old May 13th 09, 06:37 PM posted to microsoft.public.windowsxp.perform_maintain
No_Name
external usenet poster
 
Posts: 12
Default Application will not open Maximized

On May 13, 12:17*pm, Leonard Grey wrote:
The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est



wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).
  #5  
Old May 13th 09, 06:37 PM posted to microsoft.public.windowsxp.perform_maintain
No_Name
external usenet poster
 
Posts: 12
Default Application will not open Maximized

On May 13, 12:17*pm, Leonard Grey wrote:
The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est



wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).
  #6  
Old May 13th 09, 07:26 PM posted to microsoft.public.windowsxp.perform_maintain
SC Tom[_3_]
external usenet poster
 
Posts: 4,089
Default Application will not open Maximized


wrote in message
...
On May 13, 12:17 pm, Leonard Grey wrote:
The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est



wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).

Unless you really need the new update, you could always go back to v1.6.

SC Tom


  #7  
Old May 13th 09, 07:26 PM posted to microsoft.public.windowsxp.perform_maintain
SC Tom[_3_]
external usenet poster
 
Posts: 4,089
Default Application will not open Maximized


wrote in message
...
On May 13, 12:17 pm, Leonard Grey wrote:
The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est



wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).

Unless you really need the new update, you could always go back to v1.6.

SC Tom


  #8  
Old May 14th 09, 01:35 PM posted to microsoft.public.windowsxp.perform_maintain
No_Name
external usenet poster
 
Posts: 12
Default Application will not open Maximized

On May 13, 1:26*pm, "SC Tom" wrote:
wrote in message

...
On May 13, 12:17 pm, Leonard Grey wrote:





The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est


wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).

Unless you really need the new update, you could always go back to v1.6.

SC Tom- Hide quoted text -

- Show quoted text -


Thanks Tom,
We have an issue w/ v1.6 where we receive intermittent,
unreproduceable Application Hang errors. The vendor did not know what
could be causing the error but recommends we upgrade to the latest
version of the software to see if that fixes it before they delve into
it further.
  #9  
Old May 14th 09, 01:35 PM posted to microsoft.public.windowsxp.perform_maintain
No_Name
external usenet poster
 
Posts: 12
Default Application will not open Maximized

On May 13, 1:26*pm, "SC Tom" wrote:
wrote in message

...
On May 13, 12:17 pm, Leonard Grey wrote:





The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est


wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).

Unless you really need the new update, you could always go back to v1.6.

SC Tom- Hide quoted text -

- Show quoted text -


Thanks Tom,
We have an issue w/ v1.6 where we receive intermittent,
unreproduceable Application Hang errors. The vendor did not know what
could be causing the error but recommends we upgrade to the latest
version of the software to see if that fixes it before they delve into
it further.
  #10  
Old May 14th 09, 02:10 PM posted to microsoft.public.windowsxp.perform_maintain
SC Tom[_3_]
external usenet poster
 
Posts: 4,089
Default Application will not open Maximized


wrote in message
...
On May 13, 1:26 pm, "SC Tom" wrote:
wrote in message

...
On May 13, 12:17 pm, Leonard Grey wrote:





The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est


wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).

Unless you really need the new update, you could always go back to v1.6.

SC Tom- Hide quoted text -

- Show quoted text -


Thanks Tom,
We have an issue w/ v1.6 where we receive intermittent,
unreproduceable Application Hang errors. The vendor did not know what
could be causing the error but recommends we upgrade to the latest
version of the software to see if that fixes it before they delve into
it further.
======================


Sorry that won't work. . .
I see on their web site
http://www.fujitsu.com/us/services/c...utilities.html
that there's an update pack 2. Have you installed it? Also, are you using MS
SharePoint along with this? I see an update pack for it, too.

SC Tom


  #11  
Old May 14th 09, 02:10 PM posted to microsoft.public.windowsxp.perform_maintain
SC Tom[_3_]
external usenet poster
 
Posts: 4,089
Default Application will not open Maximized


wrote in message
...
On May 13, 1:26 pm, "SC Tom" wrote:
wrote in message

...
On May 13, 12:17 pm, Leonard Grey wrote:





The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est


wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).

Unless you really need the new update, you could always go back to v1.6.

SC Tom- Hide quoted text -

- Show quoted text -


Thanks Tom,
We have an issue w/ v1.6 where we receive intermittent,
unreproduceable Application Hang errors. The vendor did not know what
could be causing the error but recommends we upgrade to the latest
version of the software to see if that fixes it before they delve into
it further.
======================


Sorry that won't work. . .
I see on their web site
http://www.fujitsu.com/us/services/c...utilities.html
that there's an update pack 2. Have you installed it? Also, are you using MS
SharePoint along with this? I see an update pack for it, too.

SC Tom


  #12  
Old May 14th 09, 02:20 PM posted to microsoft.public.windowsxp.perform_maintain
No_Name
external usenet poster
 
Posts: 12
Default Application will not open Maximized

On May 14, 8:10*am, "SC Tom" wrote:
wrote in message

...
On May 13, 1:26 pm, "SC Tom" wrote:





wrote in message


....
On May 13, 12:17 pm, Leonard Grey wrote:


The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est


wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).


Unless you really need the new update, you could always go back to v1.6..


SC Tom- Hide quoted text -


- Show quoted text -


Thanks Tom,
We have an issue w/ v1.6 where we receive intermittent,
unreproduceable Application Hang errors. The vendor did not know what
could be causing the error but recommends we upgrade to the latest
version of the software to see if that fixes it before they delve into
it further.
======================

Sorry that won't work. . .
I see on their web sitehttp://www.fujitsu.com/us/services/computing/peripherals/scanners/sup...
that there's an update pack 2. Have you installed it? Also, are you using MS
SharePoint along with this? I see an update pack for it, too.

SC Tom- Hide quoted text -

- Show quoted text -


I am using Update 2. We are not using it with Sharepoint. I have dug
deeper into the Registry and there is a binary WinPos key that just
not updated when closed from a maximized state.
  #13  
Old May 14th 09, 02:20 PM posted to microsoft.public.windowsxp.perform_maintain
No_Name
external usenet poster
 
Posts: 12
Default Application will not open Maximized

On May 14, 8:10*am, "SC Tom" wrote:
wrote in message

...
On May 13, 1:26 pm, "SC Tom" wrote:





wrote in message


....
On May 13, 12:17 pm, Leonard Grey wrote:


The way Windows knows to open an application maximized is to make a
shortcut to the executable and set it to open maximized. I have yet to
see this fail in my own experience. If it fails for you, I suggest
contacting the program's technical support.
---
Leonard Grey
Errare humanum est


wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.


I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).


I have also tried start /max application.exe from the command line.
Both of these do not work.


Downloading a 3rd party tool is not an option.


Any suggestions?


Thanks,
Blake- Hide quoted text -


- Show quoted text -


Thanks for the respoonse Leonard. I have contacted their technical
support. Hopefully they will get back to me in a timely manner. The
shortcut maximized solution does not work on this application. I
think it maybe because I updated to the current version instead of
doing a fresh install, but they do not provide the full version on the
web (only the update).


Unless you really need the new update, you could always go back to v1.6..


SC Tom- Hide quoted text -


- Show quoted text -


Thanks Tom,
We have an issue w/ v1.6 where we receive intermittent,
unreproduceable Application Hang errors. The vendor did not know what
could be causing the error but recommends we upgrade to the latest
version of the software to see if that fixes it before they delve into
it further.
======================

Sorry that won't work. . .
I see on their web sitehttp://www.fujitsu.com/us/services/computing/peripherals/scanners/sup...
that there's an update pack 2. Have you installed it? Also, are you using MS
SharePoint along with this? I see an update pack for it, too.

SC Tom- Hide quoted text -

- Show quoted text -


I am using Update 2. We are not using it with Sharepoint. I have dug
deeper into the Registry and there is a binary WinPos key that just
not updated when closed from a maximized state.
  #14  
Old May 14th 09, 02:30 PM posted to microsoft.public.windowsxp.perform_maintain
smlunatick
external usenet poster
 
Posts: 4,866
Default Application will not open Maximized

On May 13, 6:08*pm, wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.

I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).

I have also tried start /max application.exe from the command line.
Both of these do not work.

Downloading a 3rd party tool is not an option.

Any suggestions?

Thanks,
Blake


When you "expand" the application "manually" does it work?
  #15  
Old May 14th 09, 02:30 PM posted to microsoft.public.windowsxp.perform_maintain
smlunatick
external usenet poster
 
Posts: 4,866
Default Application will not open Maximized

On May 13, 6:08*pm, wrote:
I am trying to set an document scanning application (Fujitsu Scandall
Pro v1.7) to open maximized everytime it is run. This was easy enough
in v1.6 as it would remember the last windows position, however v1.7
will not open maximized.

I have tried the shortcut trick( Shortcut Properties Shortcut
Run : Maximized).

I have also tried start /max application.exe from the command line.
Both of these do not work.

Downloading a 3rd party tool is not an option.

Any suggestions?

Thanks,
Blake


When you "expand" the application "manually" does it work?
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 10:52 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.