If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x0000
Hi,
I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
Ads |
#2
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x0000
Multiposted and answered
If you must then crospost instead of multipost http://www.blakjak.demon.co.uk/mul_crss.htm -- Peter Please Reply to Newsgroup for the benefit of others Requests for assistance by email can not and will not be acknowledged. "varaprasad konjeti" wrote in message ... Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#3
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x0000
Multiposted and answered
If you must then crospost instead of multipost http://www.blakjak.demon.co.uk/mul_crss.htm -- Peter Please Reply to Newsgroup for the benefit of others Requests for assistance by email can not and will not be acknowledged. "varaprasad konjeti" wrote in message ... Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#4
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x0000
Cross posted to microsoft.public.windowsxp.general
Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#5
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x0000
Cross posted to microsoft.public.windowsxp.general
Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#6
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#7
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#8
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
You already got that info (USB port connected) in the form of a MS KB in your other
multiposted post of the same issue -- Peter Please Reply to Newsgroup for the benefit of others Requests for assistance by email can not and will not be acknowledged. "varaprasad konjeti" wrote in message ... Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#9
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
You already got that info (USB port connected) in the form of a MS KB in your other
multiposted post of the same issue -- Peter Please Reply to Newsgroup for the benefit of others Requests for assistance by email can not and will not be acknowledged. "varaprasad konjeti" wrote in message ... Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#10
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
Varaprasad
What USB devices are you connecting to the USB port? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ sonicfactor konjeti wrote: Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#11
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
Varaprasad
What USB devices are you connecting to the USB port? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ sonicfactor konjeti wrote: Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#12
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
Peter
These messages are now being cross posted to microsoft.public.windowsxp.general,microsoft.publi c.windowsxp.hardware. Where should I look for the other multi-post? -- Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ Peter Foldes wrote: You already got that info (USB port connected) in the form of a MS KB in your other multiposted post of the same issue "varaprasad konjeti" wrote in message ... Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#13
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
Peter
These messages are now being cross posted to microsoft.public.windowsxp.general,microsoft.publi c.windowsxp.hardware. Where should I look for the other multi-post? -- Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ Peter Foldes wrote: You already got that info (USB port connected) in the form of a MS KB in your other multiposted post of the same issue "varaprasad konjeti" wrote in message ... Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#14
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
Gerry
Thanks I did no see your crosspost at the time of posting. (WinXP Hardware) -- Peter Please Reply to Newsgroup for the benefit of others Requests for assistance by email can not and will not be acknowledged. "Gerry" wrote in message ... Peter These messages are now being cross posted to microsoft.public.windowsxp.general,microsoft.publi c.windowsxp.hardware. Where should I look for the other multi-post? -- Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ Peter Foldes wrote: You already got that info (USB port connected) in the form of a MS KB in your other multiposted post of the same issue "varaprasad konjeti" wrote in message ... Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
#15
|
|||
|
|||
bluescreen STOP:0x0000008E(0xc0000005,0x806e694f,0xa8625264,0 x
Gerry
Thanks I did no see your crosspost at the time of posting. (WinXP Hardware) -- Peter Please Reply to Newsgroup for the benefit of others Requests for assistance by email can not and will not be acknowledged. "Gerry" wrote in message ... Peter These messages are now being cross posted to microsoft.public.windowsxp.general,microsoft.publi c.windowsxp.hardware. Where should I look for the other multi-post? -- Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ Peter Foldes wrote: You already got that info (USB port connected) in the form of a MS KB in your other multiposted post of the same issue "varaprasad konjeti" wrote in message ... Hi Gerry, Thanks for the information. Error occurs only when USB port is connected. Thanks Varaprasad "Gerry" wrote: Cross posted to microsoft.public.windowsxp.general Background information on Stop Error message 0x8E http://msdn2.microsoft.com/en-us/library/ms794023.aspx 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED A kernel mode program generated an exception which the error handler didn't catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade). Source: http://aumha.org/a/stop.htm Look at the Stop Error Report. Under the code a file is sometimes named. http://www.allinterview.com/showanswers/67083.html Does the error occur during the boot process, after the completion of the boot process or any time? Does the error occur in safe mode? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ varaprasad konjeti wrote: Hi, I am getting below error whenever I plug any external dvd writer. I am currently using XP SP3. Any help how to resolve it "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacture for driver update.Try changing video adapters. Check with your hardware vendor for any bios updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your, press f8 to select advance options, and then select safe mode. Technical Information: *** STOP: 0x0000008E (0xc0000005,0x806e694f,0xa8625264,0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance." |
Thread Tools | |
Display Modes | |
|
|