A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Printing and Faxing with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Printing from DOS program to USB printer?



 
 
Thread Tools Display Modes
  #1  
Old May 1st 04, 08:41 AM
James Shilstone
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

I have run into a different variation on this theme. First off, I got
the DOS program to print by following the previous recommendations to
Share the printer in Windows, then running the following DOS command:

NET USE LPT1: \\computer-name\printer-name /persistent:yes

However, now we cannot access the USB printer from inside Windows. We
get a message "There was an error writing to USB001".

Any ideas?

Thanks,
Jay Shilstone
Ads
  #2  
Old May 2nd 04, 01:53 PM
lUCKY
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

jAY, PRINTERS OPERATING ON USB ARE NOT COMPATABLE WITH OLDER DOS PROGRAMS, AND I HAVE A SIMILAR PROBLEM. i FOUND THE ONLY WAY OUT WAS TO CONNECT THE TWO PRINTERS AND RESET THE DEFAULT PRINTER EACH TIME I NEEDED TO USE THE DOS PROGRAM. DOS WAS SETUP TO USE
LPT PORT ON PARALEL PRINTERS.
  #3  
Old May 2nd 04, 01:53 PM
lUCKY
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

jAY, PRINTERS OPERATING ON USB ARE NOT COMPATABLE WITH OLDER DOS PROGRAMS, AND I HAVE A SIMILAR PROBLEM. i FOUND THE ONLY WAY OUT WAS TO CONNECT THE TWO PRINTERS AND RESET THE DEFAULT PRINTER EACH TIME I NEEDED TO USE THE DOS PROGRAM. DOS WAS SETUP TO USE
LPT PORT ON PARALEL PRINTERS.
  #4  
Old May 2nd 04, 01:53 PM
lUCKY
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

jAY, PRINTERS OPERATING ON USB ARE NOT COMPATABLE WITH OLDER DOS PROGRAMS, AND I HAVE A SIMILAR PROBLEM. i FOUND THE ONLY WAY OUT WAS TO CONNECT THE TWO PRINTERS AND RESET THE DEFAULT PRINTER EACH TIME I NEEDED TO USE THE DOS PROGRAM. DOS WAS SETUP TO USE
LPT PORT ON PARALEL PRINTERS.
  #5  
Old May 2nd 04, 01:53 PM
lUCKY
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

jAY, PRINTERS OPERATING ON USB ARE NOT COMPATABLE WITH OLDER DOS PROGRAMS, AND I HAVE A SIMILAR PROBLEM. i FOUND THE ONLY WAY OUT WAS TO CONNECT THE TWO PRINTERS AND RESET THE DEFAULT PRINTER EACH TIME I NEEDED TO USE THE DOS PROGRAM. DOS WAS SETUP TO USE
LPT PORT ON PARALEL PRINTERS.
  #6  
Old May 2nd 04, 01:53 PM
lUCKY
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

jAY, PRINTERS OPERATING ON USB ARE NOT COMPATABLE WITH OLDER DOS PROGRAMS, AND I HAVE A SIMILAR PROBLEM. i FOUND THE ONLY WAY OUT WAS TO CONNECT THE TWO PRINTERS AND RESET THE DEFAULT PRINTER EACH TIME I NEEDED TO USE THE DOS PROGRAM. DOS WAS SETUP TO USE
LPT PORT ON PARALEL PRINTERS.
  #7  
Old May 2nd 04, 01:55 PM
lUCKY
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

jAY, PRINTERS OPERATING ON USB ARE NOT COMPATABLE WITH OLDER DOS PROGRAMS, AND I HAVE A SIMILAR PROBLEM. i FOUND THE ONLY WAY OUT WAS TO CONNECT THE TWO PRINTERS AND RESET THE DEFAULT PRINTER EACH TIME I NEEDED TO USE THE DOS PROGRAM. DOS WAS SETUP TO USE
LPT PORT ON PARALEL PRINTERS.
  #8  
Old May 2nd 04, 01:55 PM
lUCKY
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

jAY, PRINTERS OPERATING ON USB ARE NOT COMPATABLE WITH OLDER DOS PROGRAMS, AND I HAVE A SIMILAR PROBLEM. i FOUND THE ONLY WAY OUT WAS TO CONNECT THE TWO PRINTERS AND RESET THE DEFAULT PRINTER EACH TIME I NEEDED TO USE THE DOS PROGRAM. DOS WAS SETUP TO USE
LPT PORT ON PARALEL PRINTERS.
  #9  
Old May 2nd 04, 01:55 PM
lUCKY
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

jAY, PRINTERS OPERATING ON USB ARE NOT COMPATABLE WITH OLDER DOS PROGRAMS, AND I HAVE A SIMILAR PROBLEM. i FOUND THE ONLY WAY OUT WAS TO CONNECT THE TWO PRINTERS AND RESET THE DEFAULT PRINTER EACH TIME I NEEDED TO USE THE DOS PROGRAM. DOS WAS SETUP TO USE
LPT PORT ON PARALEL PRINTERS.
  #10  
Old May 5th 04, 04:23 AM
Davide Guolo
external usenet poster
 
Posts: n/a
Default Printing from DOS program to USB printer?

James,

NET USE LPT1: \\computer-name\printer-name /persistent:yes

However, now we cannot access the USB printer from inside Windows. We
get a message "There was an error writing to USB001".


Try to "NET USE LPT1: /D" just before printing from Windows to see if it is
the NET USE, or try to restart the pc and print first from Windows then from
DOS. Maybe the DOS app. is sending some characters not well recognized by
the printer.

Regards,
Davide
---------------------------------------------------
Printfil - Windows Printing System for Applications
http://www.guolo.com/printfil
---------------------------------------------------


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 04:57 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.