|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
March 28th 07, 01:14 AM
posted to microsoft.public.windowsxp.print_fax
|
|||
|
|||
Printer Carrier Stall on 922 AIO
I have a problem with my 922 AIO stalling. The carrier bangs rather hard in
one direction and then returns to the other side with a bang. Then it shows an error message 1200. I can find no obstructions and I've re-inserted the carthidges several times and plugged and unpluged and updated. Please help. -- Jet 
|
| Ads |
|
#2
March 29th 07, 08:08 AM
posted to microsoft.public.windowsxp.print_fax
|
|||
|
|||
|
Printer Carrier Stall on 922 AIO
Sounds like the printer has a hardware problem.
The printer has system that keeps track of where the head is, and how fast it's moving. This is what is not working. "Jet" wrote in message ... I have a problem with my 922 AIO stalling. The carrier bangs rather hard in one direction and then returns to the other side with a bang. Then it shows an error message 1200. I can find no obstructions and I've re-inserted the carthidges several times and plugged and unpluged and updated. Please help. -- Jet
|
|
#3
April 1st 07, 06:10 PM
posted to microsoft.public.windowsxp.print_fax
|
|||
|
|||
|
Printer Carrier Stall on 922 AIO
Thanks Chuck for the advice. You were right.
-- Jet "Chuck" wrote: Sounds like the printer has a hardware problem. The printer has system that keeps track of where the head is, and how fast it's moving. This is what is not working. "Jet" wrote in message ... I have a problem with my 922 AIO stalling. The carrier bangs rather hard in one direction and then returns to the other side with a bang. Then it shows an error message 1200. I can find no obstructions and I've re-inserted the carthidges several times and plugged and unpluged and updated. Please help. -- Jet
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
