A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Networking and the Internet with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

how to find other computers connected to the same router



 
 
Thread Tools Display Modes
  #31  
Old July 29th 04, 07:27 AM
Michael D. Alligood
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click Computer
Browser and press Start. Right-click Computer Browser and press Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install

which -
Client or Protocol or Service? Do I need XP CD disc for each install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your computers to

see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in our

office.
Thank you.

"Michael D. Alligood" wrote in message
...
In the Local Area Connection properities, you should see a box that
states,
"This connection uses the following items..." You should see "File

and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for

Microsoft
Network"?

"Michael D. Alligood" wrote in message
...
Hve you enabled "File and Print Sharing for Microsoft Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to share

files
and
printer.


"Michael D. Alligood" wrote in

message
...
Sorry, I know you addressed Doug but I have a question about

your
router.
An
MR814v2 is a wireless router. I see that your connected via
ethernet
cables,
is that correct? Also, you might want to try and reset the

router.
There
should be a very small reset button on the back.



















Ads
  #32  
Old July 29th 04, 08:01 AM
AG Young
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Michael, thank you for your advises and help. You have been great help.

We have done all you items up to item 8 per your instruction, after I expand
"Services and Applications" there is no Computer Browser.

On the right side there a
Services Starts, stops, and configures Windows services
WMI Control type Extension Snap-in Configures and controls the
Windows Management Instumentations
Indexing Services type Snap-in Provides fast and flexible searching
Message Queuing
Internet Information Services

We set Netscape as default browser. But in the tight spot, we do use
Internet Explorer.

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click Computer
Browser and press Start. Right-click Computer Browser and press

Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install

which -
Client or Protocol or Service? Do I need XP CD disc for each install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your computers to

see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in our

office.
Thank you.

"Michael D. Alligood" wrote in message
...
In the Local Area Connection properities, you should see a box

that
states,
"This connection uses the following items..." You should see "File

and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for

Microsoft
Network"?

"Michael D. Alligood" wrote in

message
...
Hve you enabled "File and Print Sharing for Microsoft

Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to share

files
and
printer.


"Michael D. Alligood" wrote in

message
...
Sorry, I know you addressed Doug but I have a question

about
your
router.
An
MR814v2 is a wireless router. I see that your connected

via
ethernet
cables,
is that correct? Also, you might want to try and reset the
router.
There
should be a very small reset button on the back.























  #33  
Old July 29th 04, 08:02 AM
AG Young
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Michael, thank you for your advises and help. You have been great help.

We have done all you items up to item 8 per your instruction, after I expand
"Services and Applications" there is no Computer Browser.

On the right side there a
Services Starts, stops, and configures Windows services
WMI Control type Extension Snap-in Configures and controls the
Windows Management Instumentations
Indexing Services type Snap-in Provides fast and flexible searching
Message Queuing
Internet Information Services

We set Netscape as default browser. But in the tight spot, we do use
Internet Explorer.

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click Computer
Browser and press Start. Right-click Computer Browser and press

Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install

which -
Client or Protocol or Service? Do I need XP CD disc for each install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your computers to

see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in our

office.
Thank you.

"Michael D. Alligood" wrote in message
...
In the Local Area Connection properities, you should see a box

that
states,
"This connection uses the following items..." You should see "File

and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for

Microsoft
Network"?

"Michael D. Alligood" wrote in

message
...
Hve you enabled "File and Print Sharing for Microsoft

Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to share

files
and
printer.


"Michael D. Alligood" wrote in

message
...
Sorry, I know you addressed Doug but I have a question

about
your
router.
An
MR814v2 is a wireless router. I see that your connected

via
ethernet
cables,
is that correct? Also, you might want to try and reset the
router.
There
should be a very small reset button on the back.























  #34  
Old July 29th 04, 08:10 AM
Michael D. Alligood
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank you for your advises and help. You have been great help.

We have done all you items up to item 8 per your instruction, after I

expand
"Services and Applications" there is no Computer Browser.

On the right side there a
Services Starts, stops, and configures Windows services
WMI Control type Extension Snap-in Configures and controls the
Windows Management Instumentations
Indexing Services type Snap-in Provides fast and flexible searching
Message Queuing
Internet Information Services

We set Netscape as default browser. But in the tight spot, we do use
Internet Explorer.

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click Computer
Browser and press Start. Right-click Computer Browser and press

Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install

which -
Client or Protocol or Service? Do I need XP CD disc for each install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your computers

to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in our
office.
Thank you.

"Michael D. Alligood" wrote in message
...
In the Local Area Connection properities, you should see a box

that
states,
"This connection uses the following items..." You should see

"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for
Microsoft
Network"?

"Michael D. Alligood" wrote in

message
...
Hve you enabled "File and Print Sharing for Microsoft

Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to share

files
and
printer.


"Michael D. Alligood" wrote in
message
...
Sorry, I know you addressed Doug but I have a question

about
your
router.
An
MR814v2 is a wireless router. I see that your connected

via
ethernet
cables,
is that correct? Also, you might want to try and reset

the
router.
There
should be a very small reset button on the back.

























  #35  
Old July 29th 04, 08:10 AM
Michael D. Alligood
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank you for your advises and help. You have been great help.

We have done all you items up to item 8 per your instruction, after I

expand
"Services and Applications" there is no Computer Browser.

On the right side there a
Services Starts, stops, and configures Windows services
WMI Control type Extension Snap-in Configures and controls the
Windows Management Instumentations
Indexing Services type Snap-in Provides fast and flexible searching
Message Queuing
Internet Information Services

We set Netscape as default browser. But in the tight spot, we do use
Internet Explorer.

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click Computer
Browser and press Start. Right-click Computer Browser and press

Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install

which -
Client or Protocol or Service? Do I need XP CD disc for each install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your computers

to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in our
office.
Thank you.

"Michael D. Alligood" wrote in message
...
In the Local Area Connection properities, you should see a box

that
states,
"This connection uses the following items..." You should see

"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for
Microsoft
Network"?

"Michael D. Alligood" wrote in

message
...
Hve you enabled "File and Print Sharing for Microsoft

Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to share

files
and
printer.


"Michael D. Alligood" wrote in
message
...
Sorry, I know you addressed Doug but I have a question

about
your
router.
An
MR814v2 is a wireless router. I see that your connected

via
ethernet
cables,
is that correct? Also, you might want to try and reset

the
router.
There
should be a very small reset button on the back.

























  #36  
Old July 29th 04, 08:24 AM
AG Young
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Michael, thank you for your advises and help. You have been great help.

We have done all you items up to item 8 per your instruction, after I expand
"Services and Applications" there is no Computer Browser.

On the right side there a
Services Starts, stops, and configures Windows services
WMI Control type Extension Snap-in Configures and controls the
Windows Management Instumentations
Indexing Services type Snap-in Provides fast and flexible searching
Message Queuing
Internet Information Services

We set Netscape as default browser. But in the tight spot, we do use
Internet Explorer.

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click Computer
Browser and press Start. Right-click Computer Browser and press

Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install

which -
Client or Protocol or Service? Do I need XP CD disc for each install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your computers to

see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in our

office.
Thank you.

"Michael D. Alligood" wrote in message
...
In the Local Area Connection properities, you should see a box

that
states,
"This connection uses the following items..." You should see "File

and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for

Microsoft
Network"?

"Michael D. Alligood" wrote in

message
...
Hve you enabled "File and Print Sharing for Microsoft

Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to share

files
and
printer.


"Michael D. Alligood" wrote in

message
...
Sorry, I know you addressed Doug but I have a question

about
your
router.
An
MR814v2 is a wireless router. I see that your connected

via
ethernet
cables,
is that correct? Also, you might want to try and reset the
router.
There
should be a very small reset button on the back.























  #37  
Old July 29th 04, 08:25 AM
Michael D. Alligood
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank you for your advises and help. You have been great help.

We have done all you items up to item 8 per your instruction, after I

expand
"Services and Applications" there is no Computer Browser.

On the right side there a
Services Starts, stops, and configures Windows services
WMI Control type Extension Snap-in Configures and controls the
Windows Management Instumentations
Indexing Services type Snap-in Provides fast and flexible searching
Message Queuing
Internet Information Services

We set Netscape as default browser. But in the tight spot, we do use
Internet Explorer.

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click Computer
Browser and press Start. Right-click Computer Browser and press

Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install

which -
Client or Protocol or Service? Do I need XP CD disc for each install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your computers

to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in our
office.
Thank you.

"Michael D. Alligood" wrote in message
...
In the Local Area Connection properities, you should see a box

that
states,
"This connection uses the following items..." You should see

"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for
Microsoft
Network"?

"Michael D. Alligood" wrote in

message
...
Hve you enabled "File and Print Sharing for Microsoft

Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to share

files
and
printer.


"Michael D. Alligood" wrote in
message
...
Sorry, I know you addressed Doug but I have a question

about
your
router.
An
MR814v2 is a wireless router. I see that your connected

via
ethernet
cables,
is that correct? Also, you might want to try and reset

the
router.
There
should be a very small reset button on the back.

























  #38  
Old July 29th 04, 08:34 AM
AG Young
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

OK, My Computer / Manage / Services and Applications / Services
Computer Browser
status: started
Startup type automatic
Log On as : Local System

"Michael D. Alligood" wrote in message
...
Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI

"Michael D. Alligood" wrote in message

...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click

Computer
Browser and press Start. Right-click Computer Browser and press

Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install
which -
Client or Protocol or Service? Do I need XP CD disc for each

install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your

computers
to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in

our
office.
Thank you.

"Michael D. Alligood" wrote in

message
...
In the Local Area Connection properities, you should see a box

that
states,
"This connection uses the following items..." You should see

"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for
Microsoft
Network"?

"Michael D. Alligood" wrote in

message
...
Hve you enabled "File and Print Sharing for Microsoft

Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to

share
files
and
printer.


"Michael D. Alligood" wrote

in
message
...
Sorry, I know you addressed Doug but I have a question

about
your
router.
An
MR814v2 is a wireless router. I see that your

connected
via
ethernet
cables,
is that correct? Also, you might want to try and reset

the
router.
There
should be a very small reset button on the back.





























  #39  
Old July 29th 04, 08:35 AM
AG Young
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

OK, My Computer / Manage / Services and Applications / Services
Computer Browser
status: started
Startup type automatic
Log On as : Local System

"Michael D. Alligood" wrote in message
...
Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI

"Michael D. Alligood" wrote in message

...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click

Computer
Browser and press Start. Right-click Computer Browser and press

Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install
which -
Client or Protocol or Service? Do I need XP CD disc for each

install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your

computers
to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in

our
office.
Thank you.

"Michael D. Alligood" wrote in

message
...
In the Local Area Connection properities, you should see a box

that
states,
"This connection uses the following items..." You should see

"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for
Microsoft
Network"?

"Michael D. Alligood" wrote in

message
...
Hve you enabled "File and Print Sharing for Microsoft

Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to

share
files
and
printer.


"Michael D. Alligood" wrote

in
message
...
Sorry, I know you addressed Doug but I have a question

about
your
router.
An
MR814v2 is a wireless router. I see that your

connected
via
ethernet
cables,
is that correct? Also, you might want to try and reset

the
router.
There
should be a very small reset button on the back.





























  #40  
Old July 29th 04, 08:43 AM
AG Young
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

OK, My Computer / Manage / Services and Applications / Services
Computer Browser
status: started
Startup type automatic
Log On as : Local System

"Michael D. Alligood" wrote in message
...
Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI

"Michael D. Alligood" wrote in message

...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click

Computer
Browser and press Start. Right-click Computer Browser and press

Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install
which -
Client or Protocol or Service? Do I need XP CD disc for each

install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your

computers
to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in

our
office.
Thank you.

"Michael D. Alligood" wrote in

message
...
In the Local Area Connection properities, you should see a box

that
states,
"This connection uses the following items..." You should see

"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for
Microsoft
Network"?

"Michael D. Alligood" wrote in

message
...
Hve you enabled "File and Print Sharing for Microsoft

Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to

share
files
and
printer.


"Michael D. Alligood" wrote

in
message
...
Sorry, I know you addressed Doug but I have a question

about
your
router.
An
MR814v2 is a wireless router. I see that your

connected
via
ethernet
cables,
is that correct? Also, you might want to try and reset

the
router.
There
should be a very small reset button on the back.





























  #41  
Old July 29th 04, 08:52 AM
Michael D. Alligood
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Okay, lets back up here a moment. Run ipconfig on all the computer and post
me the results.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
OK, My Computer / Manage / Services and Applications / Services
Computer Browser
status: started
Startup type automatic
Log On as : Local System

"Michael D. Alligood" wrote in message
...
Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click

Computer
Browser and press Start. Right-click Computer Browser and press
Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share -

install
which -
Client or Protocol or Service? Do I need XP CD disc for each

install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your

computers
to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in

our
office.
Thank you.

"Michael D. Alligood" wrote in

message
...
In the Local Area Connection properities, you should see a

box
that
states,
"This connection uses the following items..." You should see

"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing

for
Microsoft
Network"?

"Michael D. Alligood" wrote in
message
...
Hve you enabled "File and Print Sharing for Microsoft
Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the

button.
Also reset the router software too. Still unable to

share
files
and
printer.


"Michael D. Alligood" wrote

in
message
...
Sorry, I know you addressed Doug but I have a

question
about
your
router.
An
MR814v2 is a wireless router. I see that your

connected
via
ethernet
cables,
is that correct? Also, you might want to try and

reset
the
router.
There
should be a very small reset button on the back.































  #42  
Old July 29th 04, 08:52 AM
Michael D. Alligood
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Okay, lets back up here a moment. Run ipconfig on all the computer and post
me the results.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
OK, My Computer / Manage / Services and Applications / Services
Computer Browser
status: started
Startup type automatic
Log On as : Local System

"Michael D. Alligood" wrote in message
...
Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click

Computer
Browser and press Start. Right-click Computer Browser and press
Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share -

install
which -
Client or Protocol or Service? Do I need XP CD disc for each

install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your

computers
to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in

our
office.
Thank you.

"Michael D. Alligood" wrote in

message
...
In the Local Area Connection properities, you should see a

box
that
states,
"This connection uses the following items..." You should see

"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing

for
Microsoft
Network"?

"Michael D. Alligood" wrote in
message
...
Hve you enabled "File and Print Sharing for Microsoft
Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the

button.
Also reset the router software too. Still unable to

share
files
and
printer.


"Michael D. Alligood" wrote

in
message
...
Sorry, I know you addressed Doug but I have a

question
about
your
router.
An
MR814v2 is a wireless router. I see that your

connected
via
ethernet
cables,
is that correct? Also, you might want to try and

reset
the
router.
There
should be a very small reset button on the back.































  #43  
Old July 29th 04, 09:22 AM
Michael D. Alligood
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

Okay, lets back up here a moment. Run ipconfig on all the computer and post
me the results.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
OK, My Computer / Manage / Services and Applications / Services
Computer Browser
status: started
Startup type automatic
Log On as : Local System

"Michael D. Alligood" wrote in message
...
Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click

Computer
Browser and press Start. Right-click Computer Browser and press
Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share -

install
which -
Client or Protocol or Service? Do I need XP CD disc for each

install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your

computers
to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in

our
office.
Thank you.

"Michael D. Alligood" wrote in

message
...
In the Local Area Connection properities, you should see a

box
that
states,
"This connection uses the following items..." You should see

"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing

for
Microsoft
Network"?

"Michael D. Alligood" wrote in
message
...
Hve you enabled "File and Print Sharing for Microsoft
Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the

button.
Also reset the router software too. Still unable to

share
files
and
printer.


"Michael D. Alligood" wrote

in
message
...
Sorry, I know you addressed Doug but I have a

question
about
your
router.
An
MR814v2 is a wireless router. I see that your

connected
via
ethernet
cables,
is that correct? Also, you might want to try and

reset
the
router.
There
should be a very small reset button on the back.































  #44  
Old July 29th 04, 09:34 AM
AG Young
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

All three computers are connected to the Netgear MR814v2 router by Ethernet
cables. All 3 computers are connected to DSL and access internet fine.

"Michael D. Alligood" wrote in message
...
Okay, lets back up here a moment. Run ipconfig on all the computer and

post
me the results.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
OK, My Computer / Manage / Services and Applications / Services
Computer Browser
status: started
Startup type automatic
Log On as : Local System

"Michael D. Alligood" wrote in message
...
Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press

OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click

Computer
Browser and press Start. Right-click Computer Browser and press
Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share -

install
which -
Client or Protocol or Service? Do I need XP CD disc for each

install?
Thanks.

"Michael D. Alligood" wrote in

message
...
Have you tried looking in the Event Viewer on any of your

computers
to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers

in
our
office.
Thank you.

"Michael D. Alligood" wrote in

message
...
In the Local Area Connection properities, you should see a

box
that
states,
"This connection uses the following items..." You should

see
"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing

for
Microsoft
Network"?

"Michael D. Alligood" wrote

in
message
...
Hve you enabled "File and Print Sharing for Microsoft
Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in

message
...
Michael, thank for your advise. Done, reset the

button.
Also reset the router software too. Still unable to

share
files
and
printer.


"Michael D. Alligood"

wrote
in
message
...
Sorry, I know you addressed Doug but I have a

question
about
your
router.
An
MR814v2 is a wireless router. I see that your

connected
via
ethernet
cables,
is that correct? Also, you might want to try and

reset
the
router.
There
should be a very small reset button on the back.

































  #45  
Old July 29th 04, 09:35 AM
AG Young
external usenet poster
 
Posts: n/a
Default how to find other computers connected to the same router

All three computers are connected to the Netgear MR814v2 router by Ethernet
cables. All 3 computers are connected to DSL and access internet fine.

"Michael D. Alligood" wrote in message
...
Okay, lets back up here a moment. Run ipconfig on all the computer and

post
me the results.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
OK, My Computer / Manage / Services and Applications / Services
Computer Browser
status: started
Startup type automatic
Log On as : Local System

"Michael D. Alligood" wrote in message
...
Apologizes... Click on Services and check it again.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI

"Michael D. Alligood" wrote in message
...
Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press

OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click

Computer
Browser and press Start. Right-click Computer Browser and press
Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share -

install
which -
Client or Protocol or Service? Do I need XP CD disc for each

install?
Thanks.

"Michael D. Alligood" wrote in

message
...
Have you tried looking in the Event Viewer on any of your

computers
to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers

in
our
office.
Thank you.

"Michael D. Alligood" wrote in

message
...
In the Local Area Connection properities, you should see a

box
that
states,
"This connection uses the following items..." You should

see
"File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing

for
Microsoft
Network"?

"Michael D. Alligood" wrote

in
message
...
Hve you enabled "File and Print Sharing for Microsoft
Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in

message
...
Michael, thank for your advise. Done, reset the

button.
Also reset the router software too. Still unable to

share
files
and
printer.


"Michael D. Alligood"

wrote
in
message
...
Sorry, I know you addressed Doug but I have a

question
about
your
router.
An
MR814v2 is a wireless router. I see that your

connected
via
ethernet
cables,
is that correct? Also, you might want to try and

reset
the
router.
There
should be a very small reset button on the back.

































 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 07:28 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.