If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Cannot capture digital camcorder
I have just purchased "Dazzle Digital video creator 80"
and cannot capture any shot videos to this program my error message is "error8005 80040275" and talks about 1394 firewire.......I have no idea how to get around this to capture video...can anyone help? |
Ads |
#2
|
|||
|
|||
Cannot capture digital camcorder
The Dazzle box is doing essentially what a DV camera would do. You hook
your camera up to the Dazzle using the cables and the Dazzle box to the computer using a IEEE 1394 OHCI compliant connection (firewire). The Dazzle box converts the input from the analog device (camera or VCR or TV, etc.) into a DV data stream that the firewire can transfer to your computer and the software on the computer can store. If you are getting an error I would check all all of the connections and make sure the firewire cable is connected to a valid firewire port on the computer (if you have XP you will hear a "ding" to tell you it found the device", and then make sure that your camera is connected to the Dazzle and powered on in "Play" mode. You probably won't get any device control this way so you will have to press play on your camera to start the video feed. If you are connected a TV or VCR you will go through a similar process. HTH, Tom "lloyd campbell" wrote in message ... I have just purchased "Dazzle Digital video creator 80" and cannot capture any shot videos to this program my error message is "error8005 80040275" and talks about 1394 firewire.......I have no idea how to get around this to capture video...can anyone help? |
Thread Tools | |
Display Modes | |
|
|