If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
XP SP2 Intermittent failing to reboot - I'm puzzled
I have a setup that I built it myself. Always worked flawlessly with SP1.
After a clean install of XP PRO SP2 CD it started to fail to reboot. I.E. When I need to run another profile, I go to start/restart, it shuts down properly, POST goes ok, the XP LOGO appears and I see "starting windows " message running. And then, sundenly, just black screen and system hangs. Sometimes it reboots, sometimes it just sits there and I have to do a hard reset. Sometimes I have to hard reset for 6 or 7 times to get the system up & running again. Oh, after the first failure, it shows that boot menu for safe mode, etc. It goes on Safe Mode, no problem. I need help to isolate this problem, there's no error showing on screen. My XP system is booting on a RAID 0 config (2 80gb seagate) and a 3rd HD used as backup (80gb maxtor partitioned in 5 partitions). Soemtimes, after recovering from hibernation, I get the "delayed write failure on drive H:\$mft".. I am mentioning because it may be related to my reboot problem. Forgive my bad english and any help will be very appreciated. I can send more info if needed. Thanks in advance. |
Ads |
#2
|
|||
|
|||
XP SP2 Intermittent failing to reboot - I'm puzzled
Did you perform a thorough check for viruses, Trojans and hijackers prior to
installing SP2? -- ~Robear Dyer (PA Bear) MS MVP-Windows (Shell, IE/OE) & Security Mastering Newsgroups in Outlook Express http://www.microsoft.com/windows/ie/...ewsgroups.mspx Zalman wrote: I have a setup that I built it myself. Always worked flawlessly with SP1. After a clean install of XP PRO SP2 CD it started to fail to reboot. I.E. When I need to run another profile, I go to start/restart, it shuts down properly, POST goes ok, the XP LOGO appears and I see "starting windows " message running. And then, sundenly, just black screen and system hangs. Sometimes it reboots, sometimes it just sits there and I have to do a hard reset. Sometimes I have to hard reset for 6 or 7 times to get the system up & running again. Oh, after the first failure, it shows that boot menu for safe mode, etc. It goes on Safe Mode, no problem. I need help to isolate this problem, there's no error showing on screen. My XP system is booting on a RAID 0 config (2 80gb seagate) and a 3rd HD used as backup (80gb maxtor partitioned in 5 partitions). Soemtimes, after recovering from hibernation, I get the "delayed write failure on drive H:\$mft".. I am mentioning because it may be related to my reboot problem. Forgive my bad english and any help will be very appreciated. I can send more info if needed. Thanks in advance. |
#3
|
|||
|
|||
XP SP2 Intermittent failing to reboot - I'm puzzled
Affirmative. Actually, it was a clean install, I built the RAID with two new
hard drives, nothing on them. I added the 3rd HD after the installation was complete. I also run peridically Spybot S&D, AD-Aware and Hijack This, my system is Clean. Thanks. "PA Bear" wrote: Did you perform a thorough check for viruses, Trojans and hijackers prior to installing SP2? -- ~Robear Dyer (PA Bear) MS MVP-Windows (Shell, IE/OE) & Security Mastering Newsgroups in Outlook Express http://www.microsoft.com/windows/ie/...ewsgroups.mspx Zalman wrote: I have a setup that I built it myself. Always worked flawlessly with SP1. After a clean install of XP PRO SP2 CD it started to fail to reboot. I.E. When I need to run another profile, I go to start/restart, it shuts down properly, POST goes ok, the XP LOGO appears and I see "starting windows " message running. And then, sundenly, just black screen and system hangs. Sometimes it reboots, sometimes it just sits there and I have to do a hard reset. Sometimes I have to hard reset for 6 or 7 times to get the system up & running again. Oh, after the first failure, it shows that boot menu for safe mode, etc. It goes on Safe Mode, no problem. I need help to isolate this problem, there's no error showing on screen. My XP system is booting on a RAID 0 config (2 80gb seagate) and a 3rd HD used as backup (80gb maxtor partitioned in 5 partitions). Soemtimes, after recovering from hibernation, I get the "delayed write failure on drive H:\$mft".. I am mentioning because it may be related to my reboot problem. Forgive my bad english and any help will be very appreciated. I can send more info if needed. Thanks in advance. |
#4
|
|||
|
|||
XP SP2 Intermittent failing to reboot - I'm puzzled
this happened to me on Friday .... upgraded to SP2 with a system that has
been rock solid ... I have the same exact boot up problems .. identical ... I had to uninstall SP2 to get my system functioning again VC "Zalman" wrote in message ... I have a setup that I built it myself. Always worked flawlessly with SP1. After a clean install of XP PRO SP2 CD it started to fail to reboot. I.E. When I need to run another profile, I go to start/restart, it shuts down properly, POST goes ok, the XP LOGO appears and I see "starting windows " message running. And then, sundenly, just black screen and system hangs. Sometimes it reboots, sometimes it just sits there and I have to do a hard reset. Sometimes I have to hard reset for 6 or 7 times to get the system up & running again. Oh, after the first failure, it shows that boot menu for safe mode, etc. It goes on Safe Mode, no problem. I need help to isolate this problem, there's no error showing on screen. My XP system is booting on a RAID 0 config (2 80gb seagate) and a 3rd HD used as backup (80gb maxtor partitioned in 5 partitions). Soemtimes, after recovering from hibernation, I get the "delayed write failure on drive H:\$mft".. I am mentioning because it may be related to my reboot problem. Forgive my bad english and any help will be very appreciated. I can send more info if needed. Thanks in advance. |
#5
|
|||
|
|||
XP SP2 Intermittent failing to reboot - I'm puzzled
I am sorry to hear that VC..... unfortunatelly rolling back to SP1 is not an
option for me. At least I know it is not a problem with my rig only. thanks. "VC" wrote: this happened to me on Friday .... upgraded to SP2 with a system that has been rock solid ... I have the same exact boot up problems .. identical ... I had to uninstall SP2 to get my system functioning again VC "Zalman" wrote in message ... I have a setup that I built it myself. Always worked flawlessly with SP1. After a clean install of XP PRO SP2 CD it started to fail to reboot. I.E. When I need to run another profile, I go to start/restart, it shuts down properly, POST goes ok, the XP LOGO appears and I see "starting windows " message running. And then, sundenly, just black screen and system hangs. Sometimes it reboots, sometimes it just sits there and I have to do a hard reset. Sometimes I have to hard reset for 6 or 7 times to get the system up & running again. Oh, after the first failure, it shows that boot menu for safe mode, etc. It goes on Safe Mode, no problem. I need help to isolate this problem, there's no error showing on screen. My XP system is booting on a RAID 0 config (2 80gb seagate) and a 3rd HD used as backup (80gb maxtor partitioned in 5 partitions). Soemtimes, after recovering from hibernation, I get the "delayed write failure on drive H:\$mft".. I am mentioning because it may be related to my reboot problem. Forgive my bad english and any help will be very appreciated. I can send more info if needed. Thanks in advance. |
#6
|
|||
|
|||
BUMP
"Zalman" wrote: I have a setup that I built it myself. Always worked flawlessly with SP1. After a clean install of XP PRO SP2 CD it started to fail to reboot. I.E. When I need to run another profile, I go to start/restart, it shuts down properly, POST goes ok, the XP LOGO appears and I see "starting windows " message running. And then, sundenly, just black screen and system hangs. Sometimes it reboots, sometimes it just sits there and I have to do a hard reset. Sometimes I have to hard reset for 6 or 7 times to get the system up & running again. Oh, after the first failure, it shows that boot menu for safe mode, etc. It goes on Safe Mode, no problem. I need help to isolate this problem, there's no error showing on screen. My XP system is booting on a RAID 0 config (2 80gb seagate) and a 3rd HD used as backup (80gb maxtor partitioned in 5 partitions). Soemtimes, after recovering from hibernation, I get the "delayed write failure on drive H:\$mft".. I am mentioning because it may be related to my reboot problem. Forgive my bad english and any help will be very appreciated. I can send more info if needed. Thanks in advance. |
#7
|
|||
|
|||
On Sun, 27 Mar 2005 07:39:05 -0800, Zalman
wrote: BUMP Fasten your seat belt Zalman, because BUMP doesn't work here. |
#8
|
|||
|
|||
Yeah... I just figured that out.... I was using the web interface and now I
am reading from O.E. express... sorry about the bump :-/ Zalman "CS" escreveu na mensagem ... On Sun, 27 Mar 2005 07:39:05 -0800, Zalman wrote: BUMP Fasten your seat belt Zalman, because BUMP doesn't work here. |
#9
|
|||
|
|||
what is "Bump"?
"Zalman" wrote in message ... Yeah... I just figured that out.... I was using the web interface and now I am reading from O.E. express... sorry about the bump :-/ Zalman "CS" escreveu na mensagem ... On Sun, 27 Mar 2005 07:39:05 -0800, Zalman wrote: BUMP Fasten your seat belt Zalman, because BUMP doesn't work here. |
#10
|
|||
|
|||
Bump is used on forums, when you don't get answers, so your post appears on
the top of the forum. It does not work in here. rgds "VC" escreveu na mensagem ... what is "Bump"? "Zalman" wrote in message ... Yeah... I just figured that out.... I was using the web interface and now I am reading from O.E. express... sorry about the bump :-/ Zalman "CS" escreveu na mensagem ... On Sun, 27 Mar 2005 07:39:05 -0800, Zalman wrote: BUMP Fasten your seat belt Zalman, because BUMP doesn't work here. |
#11
|
|||
|
|||
thx
"Zalman" wrote in message ... Bump is used on forums, when you don't get answers, so your post appears on the top of the forum. It does not work in here. rgds "VC" escreveu na mensagem ... what is "Bump"? "Zalman" wrote in message ... Yeah... I just figured that out.... I was using the web interface and now I am reading from O.E. express... sorry about the bump :-/ Zalman "CS" escreveu na mensagem ... On Sun, 27 Mar 2005 07:39:05 -0800, Zalman wrote: BUMP Fasten your seat belt Zalman, because BUMP doesn't work here. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
"Slow" Print Dialog with Win XP SP2? | Warren J. Hairston | Windows Service Pack 2 | 8 | August 24th 05 06:28 AM |
Not "burning" to Cd after SP2 upgrade | \old\ devildog | Windows Service Pack 2 | 4 | December 2nd 04 05:33 PM |
XP SP2 Crashes on reboot when installed on Maxtor D740X-6L Hard Drives | Rob | Windows Service Pack 2 | 1 | November 27th 04 05:31 PM |
Can't reboot after SP2 download | mustang681 | Windows Service Pack 2 | 1 | November 27th 04 12:12 AM |
SP2 "help protect your pc" screen at first reboot after sp2 instal | David | Windows Service Pack 2 | 3 | August 24th 04 07:03 PM |