If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
DVD Won't Autorun on TV Player
I have exhausted authoring programs,burner programs,media,file conversions
and 2 different drives and cannot get any of my DVD's to autorun on my Sanyo TV player.Also when I try to run on my PC,autorun always brings up the windows explorer window showing file structure and will not allow me to start a player or even give me a choice of a player.Several of the files have my player icon attached and I can double click the file and it launches my player and runs the video OK. Commercial disks run fine on both players and always run and bring up the initial disk menu.I like to use Nero 6 Express and this has worked in the past but since I built a new bare bones PC Nero Express doesn't work.As I have exhausted all else it must be a Win XP issue??I don't even know where to start on this one.If I knew what the palyer needs to autorun then I could find what config parameter I am missing. I use XP Pro SP3,a Pentium 2.3 processor,3GB of RAM,Sony DRU-V200A and various DVD-R media. Please help before I go broke on media. Thanls in advance. Bob |
Ads |
#2
|
|||
|
|||
DVD Won't Autorun on TV Player
Bob Jones wrote:
I have exhausted authoring programs,burner programs,media,file conversions and 2 different drives and cannot get any of my DVD's to autorun on my Sanyo TV player.Also when I try to run on my PC,autorun always brings up the windows explorer window showing file structure and will not allow me to start a player or even give me a choice of a player.Several of the files have my player icon attached and I can double click the file and it launches my player and runs the video OK. Commercial disks run fine on both players and always run and bring up the initial disk menu.I like to use Nero 6 Express and this has worked in the past but since I built a new bare bones PC Nero Express doesn't work.As I have exhausted all else it must be a Win XP issue??I don't even know where to start on this one.If I knew what the palyer needs to autorun then I could find what config parameter I am missing. I use XP Pro SP3,a Pentium 2.3 processor,3GB of RAM,Sony DRU-V200A and various DVD-R media. Please help before I go broke on media. Thanls in advance. Bob ===================================== To create a DVD with NERO you need NeroVision and it is not included in the Experess version of Nero. Try the following freebie: (scroll down for instructions) DVD Flick http://www.dvdflick.net/ Be sure to read the Guide: http://www.dvdflick.net/guide.php If you have problems downloading DVD Flick... try the following direct link: http://tinyurl.com/bvtfza or... http://voxel.dl.sourceforge.net/sour...up_1.3.0.6.exe Save the file to a folder on your hard drive and install from there. Tutorials: DVD Flick Tutorial http://beginwithsoftware.com/videogu...ick-guide.html Burn Any PC Video Format into DVD http://www.freevideoworkshop.com/dvdflicktutorial.htm To create a basic Video DVD that should play in a free standing DVD player...try the following... Good luck. First...read the DVD Flick Guide to familiarize yourself with the program. Open DVD Flick and insert a blank DVD in your burner. If your computer's Autoplay window opens....just close it. Click the Project Settings button and go to...Video / Target format...residents of USA...choose...NTSC / Accept. Left click the Add title button and browse to your Movie Clips and select the ones you want on the DVD. You can arrange them by selecting one and then use the Move Up and Move Down buttons. Left click the Create DVD button / OK / Yes / Yes. Wait while the DVD is created. When the text "Finished Successfully" appears you may close DVD Flick. Now you can eject your DVD and play it in your DVD player. At some point you may wish to purchase more advanced software like Cyberlink, Nero, Roxio, Ulead, etc...but at least this is a start. Good luck. -- John Inzer MS-MVP Digital Media Experience Notice This is not tech support I am a volunteer Solutions that work for me may not work for you Proceed at your own risk |
#3
|
|||
|
|||
DVD Won't Autorun on TV Player
Hello John,
I tried DVD Flick and the results were the same on my Sanyo TV player.I did fix my PC,now autorun works and I choose Win Med Player from the autorun menu and can watch the video. I did find and install Nerovision and burned a disk,the results were the same,no autorun on the TV player. Any more suggestions?This has me really baffled. "John Inzer" wrote in message ... Bob Jones wrote: I have exhausted authoring programs,burner programs,media,file conversions and 2 different drives and cannot get any of my DVD's to autorun on my Sanyo TV player.Also when I try to run on my PC,autorun always brings up the windows explorer window showing file structure and will not allow me to start a player or even give me a choice of a player.Several of the files have my player icon attached and I can double click the file and it launches my player and runs the video OK. Commercial disks run fine on both players and always run and bring up the initial disk menu.I like to use Nero 6 Express and this has worked in the past but since I built a new bare bones PC Nero Express doesn't work.As I have exhausted all else it must be a Win XP issue??I don't even know where to start on this one.If I knew what the palyer needs to autorun then I could find what config parameter I am missing. I use XP Pro SP3,a Pentium 2.3 processor,3GB of RAM,Sony DRU-V200A and various DVD-R media. Please help before I go broke on media. Thanls in advance. Bob ===================================== To create a DVD with NERO you need NeroVision and it is not included in the Experess version of Nero. Try the following freebie: (scroll down for instructions) DVD Flick http://www.dvdflick.net/ Be sure to read the Guide: http://www.dvdflick.net/guide.php If you have problems downloading DVD Flick... try the following direct link: http://tinyurl.com/bvtfza or... http://voxel.dl.sourceforge.net/sour...up_1.3.0.6.exe Save the file to a folder on your hard drive and install from there. Tutorials: DVD Flick Tutorial http://beginwithsoftware.com/videogu...ick-guide.html Burn Any PC Video Format into DVD http://www.freevideoworkshop.com/dvdflicktutorial.htm To create a basic Video DVD that should play in a free standing DVD player...try the following... Good luck. First...read the DVD Flick Guide to familiarize yourself with the program. Open DVD Flick and insert a blank DVD in your burner. If your computer's Autoplay window opens....just close it. Click the Project Settings button and go to...Video / Target format...residents of USA...choose...NTSC / Accept. Left click the Add title button and browse to your Movie Clips and select the ones you want on the DVD. You can arrange them by selecting one and then use the Move Up and Move Down buttons. Left click the Create DVD button / OK / Yes / Yes. Wait while the DVD is created. When the text "Finished Successfully" appears you may close DVD Flick. Now you can eject your DVD and play it in your DVD player. At some point you may wish to purchase more advanced software like Cyberlink, Nero, Roxio, Ulead, etc...but at least this is a start. Good luck. -- John Inzer MS-MVP Digital Media Experience Notice This is not tech support I am a volunteer Solutions that work for me may not work for you Proceed at your own risk |
#4
|
|||
|
|||
DVD Won't Autorun on TV Player
Bob Jones wrote:
Hello John, I tried DVD Flick and the results were the same on my Sanyo TV player.I did fix my PC,now autorun works and I choose Win Med Player from the autorun menu and can watch the video. I did find and install Nerovision and burned a disk,the results were the same,no autorun on the TV player. Any more suggestions?This has me really baffled. =============================== Some free standing DVD players will not play a home made DVD...apparently you have one of them. -- John Inzer MS-MVP Digital Media Experience Notice This is not tech support I am a volunteer Solutions that work for me may not work for you Proceed at your own risk |
#5
|
|||
|
|||
DVD Won't Autorun on TV Player
Well I gave in,took advice and bought a Divx player by Phillips and it plays
everything.I ran my DVD boneyard through it and it played them all. My Sanyo said it played everything but it lied. Have burned several new ones with Nerovision Express and they work perfectly. Thanks for all the advice and help. "John Inzer" wrote in message ... Bob Jones wrote: Hello John, I tried DVD Flick and the results were the same on my Sanyo TV player.I did fix my PC,now autorun works and I choose Win Med Player from the autorun menu and can watch the video. I did find and install Nerovision and burned a disk,the results were the same,no autorun on the TV player. Any more suggestions?This has me really baffled. =============================== Some free standing DVD players will not play a home made DVD...apparently you have one of them. -- John Inzer MS-MVP Digital Media Experience Notice This is not tech support I am a volunteer Solutions that work for me may not work for you Proceed at your own risk |
#6
|
|||
|
|||
DVD Won't Autorun on TV Player
Bob Jones wrote:
Well I gave in,took advice and bought a Divx player by Phillips and it plays everything.I ran my DVD boneyard through it and it played them all. My Sanyo said it played everything but it lied. Have burned several new ones with Nerovision Express and they work perfectly. Thanks for all the advice and help. ====================== Good news! Thanks for the update. -- John Inzer MS-MVP Digital Media Experience Notice This is not tech support I am a volunteer Solutions that work for me may not work for you Proceed at your own risk |
Thread Tools | |
Display Modes | |
|
|