If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Jonathan - voice problem
The router configuration for UPNP is on the router.
"mandymandy" wrote in message ... for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp |
Ads |
#2
|
|||
|
|||
Jonathan - voice problem
If you have a Linksys router it is a blue box connected between your PC and
your Modem (normally a black box) Read the Linksys instructions for setting up your router from your PC and make the change to enable UPNP. Since you have not specified the Linksys model number and firmware revision level there is not much else I can suggest. "mandymandy" wrote in message ... forgive my ignorance is the modem the router ? cos i can only see the modem no idea where's the router or is that black box the router ? there's no buttons nor nothing on it just cables coming out of it. -----Original Message----- The router configuration for UPNP is on the router. "mandymandy" wrote in message .. . for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp . |
#3
|
|||
|
|||
Jonathan - voice problem
when the tech. came to fix up my line he didn't leave any
manual with me so i'll need detailed directions forgive me :P btw i'm copying what's on the smaller black and blue box that connects to the back of my pc, it says linksys wireless b usb netrwork adapter....2.4 ghz 802.116 - model wusb11 ... while on the bigger black box that's connected to my tv it says comcast home networking wirless _g cable gateway model number wcg200-22 i hope that's of help so what do i do next ? -----Original Message----- If you have a Linksys router it is a blue box connected between your PC and your Modem (normally a black box) Read the Linksys instructions for setting up your router from your PC and make the change to enable UPNP. Since you have not specified the Linksys model number and firmware revision level there is not much else I can suggest. "mandymandy" wrote in message ... forgive my ignorance is the modem the router ? cos i can only see the modem no idea where's the router or is that black box the router ? there's no buttons nor nothing on it just cables coming out of it. -----Original Message----- The router configuration for UPNP is on the router. "mandymandy" wrote in message . .. for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp . . |
#4
|
|||
|
|||
Jonathan - voice problem
Go to the Linksys Web site and download the user guide for Linksys Gateway
WCG 200. Since I have always used a regular router and not a gateway I do not know what UPNP or direct port forwarding options the gateway has. wrote in message ... when the tech. came to fix up my line he didn't leave any manual with me so i'll need detailed directions forgive me :P btw i'm copying what's on the smaller black and blue box that connects to the back of my pc, it says linksys wireless b usb netrwork adapter....2.4 ghz 802.116 - model wusb11 ... while on the bigger black box that's connected to my tv it says comcast home networking wirless _g cable gateway model number wcg200-22 i hope that's of help so what do i do next ? -----Original Message----- If you have a Linksys router it is a blue box connected between your PC and your Modem (normally a black box) Read the Linksys instructions for setting up your router from your PC and make the change to enable UPNP. Since you have not specified the Linksys model number and firmware revision level there is not much else I can suggest. "mandymandy" wrote in message .. . forgive my ignorance is the modem the router ? cos i can only see the modem no idea where's the router or is that black box the router ? there's no buttons nor nothing on it just cables coming out of it. -----Original Message----- The router configuration for UPNP is on the router. "mandymandy" wrote in message .. . for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp . . |
#5
|
|||
|
|||
Jonathan - voice problem
when the tech. came to fix up my line he didn't leave any
manual with me so i'll need detailed directions forgive me :P btw i'm copying what's on the smaller black and blue box that connects to the back of my pc, it says linksys wireless b usb netrwork adapter....2.4 ghz 802.116 - model wusb11 ... while on the bigger black box that's connected to my tv it says comcast home networking wirless _g cable gateway model number wcg200-22 i hope that's of help so what do i do next ? -----Original Message----- If you have a Linksys router it is a blue box connected between your PC and your Modem (normally a black box) Read the Linksys instructions for setting up your router from your PC and make the change to enable UPNP. Since you have not specified the Linksys model number and firmware revision level there is not much else I can suggest. "mandymandy" wrote in message ... forgive my ignorance is the modem the router ? cos i can only see the modem no idea where's the router or is that black box the router ? there's no buttons nor nothing on it just cables coming out of it. -----Original Message----- The router configuration for UPNP is on the router. "mandymandy" wrote in message . .. for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp . . |
#6
|
|||
|
|||
Jonathan - voice problem
Go to the Linksys Web site and download the user guide for Linksys Gateway
WCG 200. Since I have always used a regular router and not a gateway I do not know what UPNP or direct port forwarding options the gateway has. wrote in message ... when the tech. came to fix up my line he didn't leave any manual with me so i'll need detailed directions forgive me :P btw i'm copying what's on the smaller black and blue box that connects to the back of my pc, it says linksys wireless b usb netrwork adapter....2.4 ghz 802.116 - model wusb11 ... while on the bigger black box that's connected to my tv it says comcast home networking wirless _g cable gateway model number wcg200-22 i hope that's of help so what do i do next ? -----Original Message----- If you have a Linksys router it is a blue box connected between your PC and your Modem (normally a black box) Read the Linksys instructions for setting up your router from your PC and make the change to enable UPNP. Since you have not specified the Linksys model number and firmware revision level there is not much else I can suggest. "mandymandy" wrote in message .. . forgive my ignorance is the modem the router ? cos i can only see the modem no idea where's the router or is that black box the router ? there's no buttons nor nothing on it just cables coming out of it. -----Original Message----- The router configuration for UPNP is on the router. "mandymandy" wrote in message .. . for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp . . |
#7
|
|||
|
|||
Jonathan - voice problem
when the tech. came to fix up my line he didn't leave any
manual with me so i'll need detailed directions forgive me :P btw i'm copying what's on the smaller black and blue box that connects to the back of my pc, it says linksys wireless b usb netrwork adapter....2.4 ghz 802.116 - model wusb11 ... while on the bigger black box that's connected to my tv it says comcast home networking wirless _g cable gateway model number wcg200-22 i hope that's of help so what do i do next ? -----Original Message----- If you have a Linksys router it is a blue box connected between your PC and your Modem (normally a black box) Read the Linksys instructions for setting up your router from your PC and make the change to enable UPNP. Since you have not specified the Linksys model number and firmware revision level there is not much else I can suggest. "mandymandy" wrote in message ... forgive my ignorance is the modem the router ? cos i can only see the modem no idea where's the router or is that black box the router ? there's no buttons nor nothing on it just cables coming out of it. -----Original Message----- The router configuration for UPNP is on the router. "mandymandy" wrote in message . .. for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp . . |
#8
|
|||
|
|||
Jonathan - voice problem
Go to the Linksys Web site and download the user guide for Linksys Gateway
WCG 200. Since I have always used a regular router and not a gateway I do not know what UPNP or direct port forwarding options the gateway has. wrote in message ... when the tech. came to fix up my line he didn't leave any manual with me so i'll need detailed directions forgive me :P btw i'm copying what's on the smaller black and blue box that connects to the back of my pc, it says linksys wireless b usb netrwork adapter....2.4 ghz 802.116 - model wusb11 ... while on the bigger black box that's connected to my tv it says comcast home networking wirless _g cable gateway model number wcg200-22 i hope that's of help so what do i do next ? -----Original Message----- If you have a Linksys router it is a blue box connected between your PC and your Modem (normally a black box) Read the Linksys instructions for setting up your router from your PC and make the change to enable UPNP. Since you have not specified the Linksys model number and firmware revision level there is not much else I can suggest. "mandymandy" wrote in message .. . forgive my ignorance is the modem the router ? cos i can only see the modem no idea where's the router or is that black box the router ? there's no buttons nor nothing on it just cables coming out of it. -----Original Message----- The router configuration for UPNP is on the router. "mandymandy" wrote in message .. . for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp . . |
#9
|
|||
|
|||
Jonathan - voice problem
thx striker i went to the linksys page and found a
troubleshooting page that gave a short term solution to the voice problem with msn messenger all i did was just go to 'remove windows component'and check the uPNP and i was able to do voice so i closed back all my ports during the convo i was still voicing we were rejoicing but not for long cos next morning when i woke up & click on voice again i was back to sq. 1 the uPNP button's still checked what i can't understand is why do i seem to be able to just voice once & next round it just won't work i even tried opening all the ports + uPNP checked & it still won't work linksys did say there's a bug with uPNP & NAT & they r looking for a solution there solution doesn't work at all with windows messenger at all just single shot luck with msn messenger that's all .. more suggestions striker ? -----Original Message----- Go to the Linksys Web site and download the user guide for Linksys Gateway WCG 200. Since I have always used a regular router and not a gateway I do not know what UPNP or direct port forwarding options the gateway has. |
#10
|
|||
|
|||
Jonathan - voice problem
The router configuration for UPNP is on the router.
"mandymandy" wrote in message ... for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp |
#11
|
|||
|
|||
Jonathan - voice problem
The router configuration for UPNP is on the router.
"mandymandy" wrote in message ... for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp |
#12
|
|||
|
|||
Jonathan - voice problem
The router configuration for UPNP is on the router.
"mandymandy" wrote in message ... for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp |
#13
|
|||
|
|||
Jonathan - voice problem
The router configuration for UPNP is on the router.
"mandymandy" wrote in message ... for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp |
#14
|
|||
|
|||
Jonathan - voice problem
The router configuration for UPNP is on the router.
"mandymandy" wrote in message ... for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp |
#15
|
|||
|
|||
Jonathan - voice problem
The router configuration for UPNP is on the router.
"mandymandy" wrote in message ... for some strange reason my posting ( 13th july ) has just disappeared so i'm reposting cos i'm back to square one. post from 13th july (simplified) i'm using linksys router which connects to the internet thru a non-UPnP symmetric NAT admistrator and i'm not able to do voice at all on both windows/msn messenger it says dis on my fren's comp when either one try to invite for voice the network or computer you are trying to reach is experiencing a problem please try again later i've turned off my firewall .. task barpersonal firewall disable .. what else amd i not doing right? jonathan said to open router configuration and enable UPnP can't remember exactly what else but anyway i called up my cable company they seem ignorant of the UPnP and in frustration the technician opened up all the ports on my line he said it's still not too accessable to hackers cos i'm using wireless so yes i was able to voice over msn messenger but not windows messenger which was fine with me then the next day my fren clicked on the whiteboard button to invite me while we were conversing on msn messenger and it knocked me off msn & when i reboot & relog on i was back to square one with that every irritaing the network or computer you are trying to reach is experiencing a problem please try again later so jonathan plzzzzzzzzzz get me back on msn voice again i only managed to enjoy it for half a day what happened with that white board invite? i've checked all my ports are still open. is the router configuration for UPnP supp to be on my pc ? i looked in there but don't see any such button to enable .. helpppp |
Thread Tools | |
Display Modes | |
|
|