If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
CD/DVD drives recognised but not located
i have a cd burner and dvd rom installed on my computer i
have all the connections and jumpers ect right and windows detects that the hardware is there as it installs it but when i go to my computer to access them there not there and in device manager it tells me that the device drivers were installed but it is unable to locate the device. Any sugggestions? |
Ads |
#2
|
|||
|
|||
CD/DVD drives recognised but not located
Make sure the cable is connected correctly to MB & Drives... or try a
different data cable. The 80 connector cables are fussy about what end connects to the MB! The data cable may be bad as some of the connectors maybe present, enough to detect the drive, but others may not which could cause the system not to be able to access the drive. Just some thoughts... Good Luck, Len wrote in message ... i have a cd burner and dvd rom installed on my computer i have all the connections and jumpers ect right and windows detects that the hardware is there as it installs it but when i go to my computer to access them there not there and in device manager it tells me that the device drivers were installed but it is unable to locate the device. Any sugggestions? |
Thread Tools | |
Display Modes | |
|
|