If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
Hi All,
I have a customer in his 80's who literally can not learn anything new. He is running XP on an old, old clunker. It is so slow it drives him (and me) nuts. I found a full ATX from Supermicro (C7H61) that has xp support, but he need it smaller to fit his desk. Any one have a favorite good quality Mini ATX motherboard that has good xp driver support? Many thanks, -T |
Ads |
#2
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
|
#3
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
On Fri, 06 Mar 2015 12:19:03 -0800, T wrote:
I have a customer in his 80's who literally can not learn anything new. He is running XP on an old, old clunker. It is so slow it drives him (and me) nuts. I found a full ATX from Supermicro (C7H61) that has xp support, but he need it smaller to fit his desk. Any one have a favorite good quality Mini ATX motherboard that has good xp driver support? I've just ordered an Asus A78M-E, AMD A4-7300 and 4GB Corsair XMS3 Classic DDR3 1600MHz memory for my neighbor also in his 80's whose motherboard is sick. I did find an Asus Intel board that supported Win XP but I can't remember which one it was. I decided to go AMD in this case since his old board ran AMD and it should be an easier install. -- Faster, cheaper, quieter than HS2 and built in 5 years; UKUltraspeed http://www.500kmh.com/ |
#4
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
On 03/06/2015 01:13 PM, Rodney Pont wrote:
On Fri, 06 Mar 2015 12:19:03 -0800, T wrote: I have a customer in his 80's who literally can not learn anything new. He is running XP on an old, old clunker. It is so slow it drives him (and me) nuts. I found a full ATX from Supermicro (C7H61) that has xp support, but he need it smaller to fit his desk. Any one have a favorite good quality Mini ATX motherboard that has good xp driver support? I've just ordered an Asus A78M-E, AMD A4-7300 and 4GB Corsair XMS3 Classic DDR3 1600MHz memory for my neighbor also in his 80's whose motherboard is sick. I did find an Asus Intel board that supported Win XP but I can't remember which one it was. I decided to go AMD in this case since his old board ran AMD and it should be an easier install. Thank you! |
#5
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
On Fri, 06 Mar 2015 21:13:19 +0000 (GMT), Rodney Pont wrote:
I did find an Asus Intel board that supported Win XP but I can't remember which one it was. I decided to go AMD in this case since his old board ran AMD and it should be an easier install. It was an Asus H61M-K and I was going to use a Celeron G1620 and 4GB Corsair XMS3 Classic DDR3 1600MHz memory. That was before I found the AMD setup. -- Faster, cheaper, quieter than HS2 and built in 5 years; UKUltraspeed http://www.500kmh.com/ |
#6
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
I usually go to TigerDirect. They're good with
information about the products. It can be very confusing sometimes, though. A few years back I needed drivers for a Via chipset. I think the board may have been MSI. The board maker claimed they had very limited support, but at the Via website they had one download that supported all Windows versions. I've been using Asus for my last few boxes. I don't really have a reason for that. It's just that I used one once and it was good, so I stuck with them. |
#7
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
On 03/06/2015 02:14 PM, Rodney Pont wrote:
On Fri, 06 Mar 2015 21:13:19 +0000 (GMT), Rodney Pont wrote: I did find an Asus Intel board that supported Win XP but I can't remember which one it was. I decided to go AMD in this case since his old board ran AMD and it should be an easier install. It was an Asus H61M-K and I was going to use a Celeron G1620 and 4GB Corsair XMS3 Classic DDR3 1600MHz memory. That was before I found the AMD setup. Thank you! |
#8
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
On 03/06/2015 03:07 PM, Mayayana wrote:
I usually go to TigerDirect. They're good with information about the products. It can be very confusing sometimes, though. A few years back I needed drivers for a Via chipset. I think the board may have been MSI. The board maker claimed they had very limited support, but at the Via website they had one download that supported all Windows versions. I've been using Asus for my last few boxes. I don't really have a reason for that. It's just that I used one once and it was good, so I stuck with them. Thank you! |
#9
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
On 03/06/2015 03:20 PM, T wrote:
On 03/06/2015 02:14 PM, Rodney Pont wrote: On Fri, 06 Mar 2015 21:13:19 +0000 (GMT), Rodney Pont wrote: I did find an Asus Intel board that supported Win XP but I can't remember which one it was. I decided to go AMD in this case since his old board ran AMD and it should be an easier install. It was an Asus H61M-K and I was going to use a Celeron G1620 and 4GB Corsair XMS3 Classic DDR3 1600MHz memory. That was before I found the AMD setup. Thank you! Oh and look. Drivers for XP! |
#10
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
The best!
I dual boot Win XP and Win 7 MSI Mil Grade A75MA-G55 AMD CPU In a Sentey Slim Series case. Only warning is that it is a slim case and only takes low profile boards. Not a problem to find jut make sure they are low profile plug in boards. It travels with me as my desktop PC. Got mine a Microcenter.com --- news://freenews.netfront.net/ - complaints: --- |
#11
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
OldGuy wrote:
The best! I dual boot Win XP and Win 7 MSI Mil Grade A75MA-G55 AMD CPU In a Sentey Slim Series case. Only warning is that it is a slim case and only takes low profile boards. Not a problem to find jut make sure they are low profile plug in boards. It travels with me as my desktop PC. Got mine a Microcenter.com The thing is, we don't really have a good picture of the customer. 1) Are we reusing the video card ? Older video cards are more likely to have WinXP drivers. Finding a motherboard for them, not so easy... 2) Does the customer need an optical drive ? Listen to a CD collection while sitting at the computer ? Is the customer "dexterous" or arthritic. I wouldn't build a slim CD/DVD drive for someone who can't load a disc onto a "hub" design. I'd be giving them a full sized drive with a tray. A slot load (toaster) might scratch their media. The optical drive makes a big difference to the build. 1) Desktop optical drive (tray). MicroATX motherboard and regular case. Or a Shuttle case and decent supply. 2) Slim optical drive (same kind as used in a laptop). Now you can move to mini-ITX and make a nice build. Zotac makes a few motherboards that will take a Core i7, if you're tired of weak processors. 3) The dude is "modern and hip". Doesn't need an optical drive any more. Buys all the software off the Internet. Never listens to music. Has a music collection on a NAS. For that individual, there is Intel NUC, Via Nano or Pico, and so on. You can make really tiny computers, if all you drive for I/O is keyboard/mouse/monitor. In a listing, I could see some older Intel NUC boxes that support WinXP. So there are still some possibilities there. The perfect motherboards, were some made by Asrock, with VIA chipset. They had both a PCI Express and an AGP video slot. Which is good for those people who want a cheap upgrade, and want to drag forward their old video card and so on. But those days are gone now, and VIA no longer makes those chips. VIA was forced out, via the licensing agreement they had. And the main chipset suppliers aren't all that interested in "retro" builds. As soon as Microsoft buried WinXP, you can bet Intel and AMD won't be far behind. One component that tends to have good support, is NIC chips. Too bad the rest of the industry wasn't as willing to oblige. Paul |
#12
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
On 03/08/2015 03:52 PM, Paul wrote:
OldGuy wrote: The best! I dual boot Win XP and Win 7 MSI Mil Grade A75MA-G55 AMD CPU In a Sentey Slim Series case. Only warning is that it is a slim case and only takes low profile boards. Not a problem to find jut make sure they are low profile plug in boards. It travels with me as my desktop PC. Got mine a Microcenter.com The thing is, we don't really have a good picture of the customer. He is a sweet 80+ year old duffer. 1) Are we reusing the video card ? Older video cards are more likely to have WinXP drivers. Finding a motherboard for them, not so easy... Total new build. The only reuse would be his monitor. And, the data on his hard drive that I will clone over to his new computer. (That takes some doing, but I have good notes.) 2) Does the customer need an optical drive ? Listen to a CD collection while sitting at the computer ? Is the customer "dexterous" or arthritic. I wouldn't build a slim CD/DVD drive for someone who can't load a disc onto a "hub" design. I'd be giving them a full sized drive with a tray. A slot load (toaster) might scratch their media. Yes. A DVD drive. The optical drive makes a big difference to the build. 1) Desktop optical drive (tray). MicroATX motherboard and regular case. Or a Shuttle case and decent supply. 2) Slim optical drive (same kind as used in a laptop). Now you can move to mini-ITX and make a nice build. Zotac makes a few motherboards that will take a Core i7, if you're tired of weak processors. 3) The dude is "modern and hip". Doesn't need an optical drive any more. Buys all the software off the Internet. Never listens to music. Has a music collection on a NAS. For that individual, there is Intel NUC, Via Nano or Pico, and so on. You can make really tiny computers, if all you drive for I/O is keyboard/mouse/monitor. In a listing, I could see some older Intel NUC boxes that support WinXP. So there are still some possibilities there. The perfect motherboards, were some made by Asrock, with VIA chipset. VIA is a bunch of chuckleheads. I prefer Intel's chipsets. They had both a PCI Express and an AGP video slot. Which is good for those people who want a cheap upgrade, and want to drag forward their old video card and so on. But those days are gone now, and VIA no longer makes those chips. VIA was forced out, via the licensing agreement they had. And the main chipset suppliers aren't all that interested in "retro" builds. As soon as Microsoft buried WinXP, you can bet Intel and AMD won't be far behind. One component that tends to have good support, is NIC chips. Too bad the rest of the industry wasn't as willing to oblige. Paul |
#13
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
In message , T writes:
On 03/08/2015 03:52 PM, Paul wrote: [] The thing is, we don't really have a good picture of the customer. He is a sweet 80+ year old duffer. 1) Are we reusing the video card ? Older video cards are more likely to have WinXP drivers. Finding a motherboard for them, not so easy... Total new build. The only reuse would be his monitor. And, the data on his hard drive that I will clone over to his new computer. (That takes some doing, but I have good notes.) I gotta ask: _why_ are you building him a completely new computer? You said his old one was painfully slow, but there must still be a lot of second-hand machines about with XP that would run plenty fast enough. Or are you just keen to do it as a challenge? 2) Does the customer need an optical drive ? Listen to a CD collection while sitting at the computer ? Is the customer "dexterous" or arthritic. I wouldn't build a slim CD/DVD drive for someone who can't load a disc onto a "hub" design. I'd be giving them a full sized drive with a tray. A slot load (toaster) might scratch their media. Yes. A DVD drive. Paul's question about whether he has the dexterity to use a hub type is a good one. [] There may even be a laptop that is suitable; I haven't looked, as I feared good XP machines may carry a premium, but that may not be so. Perhaps a big laptop like a 17" - or even an all-in-one - might be a good choice for this customer. For a "sweet 80+ year old duffer" (I support at least one such character, though don't think he's 80+ - but similar in difficulty in grasping new concepts [I don't think he's quite got the concept of folders yet, despite months]), I can't imagine he's going to move it around much (especially since you were considering a desktop machine anyway), so the neatness of an all-in-one might appeal to him (though I don't think too many of those came out under XP). I know a laptop or AI1 may not appeal to some of us here ... -- J. P. Gilliver. UMRA: 1960/1985 MB++G()AL-IS-Ch++(p)Ar@T+H+Sh0!:`)DNAf Science is built with facts as a house is with stones--but a collection of facts is no more a science than a heap of stones is a house. -Jules Henry Poincare (1854-1912) |
#14
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
On 03/09/2015 01:53 PM, J. P. Gilliver (John) wrote:
I gotta ask: _why_ are you building him a completely new computer? You said his old one was painfully slow, but there must still be a lot of second-hand machines about with XP that would run plenty fast enough. Or are you just keen to do it as a challenge? Restarts the useful life span. And much faster. |
#15
|
|||
|
|||
any good mini atx mothers boards out there with XP support?
On 03/06/2015 12:19 PM, T wrote:
Hi All, I have a customer in his 80's who literally can not learn anything new. He is running XP on an old, old clunker. It is so slow it drives him (and me) nuts. I found a full ATX from Supermicro (C7H61) that has xp support, but he need it smaller to fit his desk. Any one have a favorite good quality Mini ATX motherboard that has good xp driver support? Many thanks, -T Hi All, Feedback: Managed to find two Micro ATX motherboards with XP support that are actually still in stock at my distributor: Gigabyte: GA-B75M-D3H (has solid Japanese capacitors) ASUS: P8H61-M Thank you all for the tips, especially the ASUS tip. -T |
|
Thread Tools | |
Display Modes | |
|
|