If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Windows XP Reg Files
Windows XP registry contains 5 main keys.
If one saves a .reg file(5 files) of each key for future use. Or may be a one reg file for whole registry which would be about 150 MB in .reg size. Will it be workable in trouble time in future? |
Ads |
#2
|
|||
|
|||
Windows XP Reg Files
AAH wrote:
Windows XP registry contains 5 main keys. If one saves a .reg file(5 files) of each key for future use. Or may be a one reg file for whole registry which would be about 150 MB in .reg size. Will it be workable in trouble time in future? They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. http://www.winxptutor.com/regback.htm http://www.larshederer.homepage.t-online.de/erunt/ One restoration procedure, involves using recovery console, and moving the files you want to use, into place. This particular example, moves "empty" registry files into place first, so that the computer can run, then uses System Restore and the last restore point, to put "proper" registry files in place. But using the same methodology, you could always take a backup set of registry files and install them. http://support.microsoft.com/kb/307545 Registry files get changed when you install new programs, or when you change settings (like, the security settings in Internet Explorer). So you would need to make a fresh set fairly frequently, for them to be any good. WinXP makes System Restore points once a day, and that's a way to capture the registry. Later Windows, only make System Restore points once a week. http://bertk.mvps.org/html/description.html When Windows is completely shut down, that would be a time when some other OS could take a snapshot of the registry files. So if you dual boot, that's another way you could be keeping copies of the registry file set. The problem with relying on System Restore, is malware. If malware gets on the machine, you can't trust any of the restore points, and consequently the registry files in SR might be relatively useless to you. That's when a separately captured set might be of some value. It all depends on whether you've been capturing corrupted (by malware) registry entries for days on end, as to whether they're good or not. Paul |
#3
|
|||
|
|||
Windows XP Reg Files
On Wed, 05 Mar 2014 13:14:17 -0500, Paul wrote:
They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. I use Erunt here too (on Windows 8.1). For the last couple of weeks I've been having an odd problem with it; perhaps you or someone else here can help me with it. If I reinstall it, it runs fine. If I then try to run it again, it doesn't--not until I reinstall it again. |
#4
|
|||
|
|||
Windows XP Reg Files
On Wed, 05 Mar 2014 12:46:56 -0700, "Ken Blake, MVP"
wrote: On Wed, 05 Mar 2014 13:14:17 -0500, Paul wrote: They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. I use Erunt here too (on Windows 8.1). For the last couple of weeks I've been having an odd problem with it; perhaps you or someone else here can help me with it. If I reinstall it, it runs fine. If I then try to run it again, it doesn't--not until I reinstall it again. Ignore the above (unless by chance that's enough information). I accidentally pressed Send before I was ready. I'll send it again tomorrow with more information. |
#5
|
|||
|
|||
Windows XP Reg Files
On Wed, 05 Mar 2014 12:48:59 -0700, "Ken Blake, MVP"
wrote: On Wed, 05 Mar 2014 12:46:56 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 13:14:17 -0500, Paul wrote: They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. I use Erunt here too (on Windows 8.1). For the last couple of weeks I've been having an odd problem with it; perhaps you or someone else here can help me with it. If I reinstall it, it runs fine. If I then try to run it again, it doesn't--not until I reinstall it again. Ignore the above (unless by chance that's enough information). I accidentally pressed Send before I was ready. I'll send it again tomorrow with more information. OK, here's what happens: I get the message Unable to create file C:\WINDOWS\ERDNT\3-6-2014\erdnt.inf Then if I proceed, I get the message [RegCreateKeyEx:5 - Access Denied} I get that message multiple times, with each file. If I then reinstall Erunt, it runs fine, but just that one time. The next time I try to run it, it fails the same way. Any suggestions as to what's wrong and how to fix it? |
#6
|
|||
|
|||
Windows XP Reg Files
Ken Blake, MVP wrote:
On Wed, 05 Mar 2014 12:48:59 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 12:46:56 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 13:14:17 -0500, Paul wrote: They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. I use Erunt here too (on Windows 8.1). For the last couple of weeks I've been having an odd problem with it; perhaps you or someone else here can help me with it. If I reinstall it, it runs fine. If I then try to run it again, it doesn't--not until I reinstall it again. Ignore the above (unless by chance that's enough information). I accidentally pressed Send before I was ready. I'll send it again tomorrow with more information. OK, here's what happens: I get the message Unable to create file C:\WINDOWS\ERDNT\3-6-2014\erdnt.inf Then if I proceed, I get the message [RegCreateKeyEx:5 - Access Denied} I get that message multiple times, with each file. If I then reinstall Erunt, it runs fine, but just that one time. The next time I try to run it, it fails the same way. Any suggestions as to what's wrong and how to fix it? It's in C:\WINDOWS . Some kind of file protection, like changing the permissions on the folder, after the fact ? Paul |
#7
|
|||
|
|||
Windows XP Reg Files
On Thu, 06 Mar 2014 14:29:42 -0500, Paul wrote:
Ken Blake, MVP wrote: On Wed, 05 Mar 2014 12:48:59 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 12:46:56 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 13:14:17 -0500, Paul wrote: They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. I use Erunt here too (on Windows 8.1). For the last couple of weeks I've been having an odd problem with it; perhaps you or someone else here can help me with it. If I reinstall it, it runs fine. If I then try to run it again, it doesn't--not until I reinstall it again. Ignore the above (unless by chance that's enough information). I accidentally pressed Send before I was ready. I'll send it again tomorrow with more information. OK, here's what happens: I get the message Unable to create file C:\WINDOWS\ERDNT\3-6-2014\erdnt.inf Then if I proceed, I get the message [RegCreateKeyEx:5 - Access Denied} I get that message multiple times, with each file. If I then reinstall Erunt, it runs fine, but just that one time. The next time I try to run it, it fails the same way. Any suggestions as to what's wrong and how to fix it? It's in C:\WINDOWS . Some kind of file protection, like changing the permissions on the folder, after the fact ? If so, it's something relatively new. Until a couple of weeks ago, this never happened. Any idea what it might be? |
#8
|
|||
|
|||
Windows XP Reg Files
On Thu, 06 Mar 2014 14:29:42 -0500, Paul wrote:
Ken Blake, MVP wrote: On Wed, 05 Mar 2014 12:48:59 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 12:46:56 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 13:14:17 -0500, Paul wrote: They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. I use Erunt here too (on Windows 8.1). For the last couple of weeks I've been having an odd problem with it; perhaps you or someone else here can help me with it. If I reinstall it, it runs fine. If I then try to run it again, it doesn't--not until I reinstall it again. Ignore the above (unless by chance that's enough information). I accidentally pressed Send before I was ready. I'll send it again tomorrow with more information. OK, here's what happens: I get the message Unable to create file C:\WINDOWS\ERDNT\3-6-2014\erdnt.inf Then if I proceed, I get the message [RegCreateKeyEx:5 - Access Denied} I get that message multiple times, with each file. If I then reinstall Erunt, it runs fine, but just that one time. The next time I try to run it, it fails the same way. Any suggestions as to what's wrong and how to fix it? It's in C:\WINDOWS . Some kind of file protection, like changing the permissions on the folder, after the fact ? I just tried reinstalling it again, this time not in C:\Windows, but in a folder on D: (a different physical drive). The same thing happened. It ran without a problem, but if I then try to rerun it, it fails the same way. |
#9
|
|||
|
|||
Windows XP Reg Files
Ken Blake, MVP wrote:
On Thu, 06 Mar 2014 14:29:42 -0500, Paul wrote: Ken Blake, MVP wrote: On Wed, 05 Mar 2014 12:48:59 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 12:46:56 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 13:14:17 -0500, Paul wrote: They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. I use Erunt here too (on Windows 8.1). For the last couple of weeks I've been having an odd problem with it; perhaps you or someone else here can help me with it. If I reinstall it, it runs fine. If I then try to run it again, it doesn't--not until I reinstall it again. Ignore the above (unless by chance that's enough information). I accidentally pressed Send before I was ready. I'll send it again tomorrow with more information. OK, here's what happens: I get the message Unable to create file C:\WINDOWS\ERDNT\3-6-2014\erdnt.inf Then if I proceed, I get the message [RegCreateKeyEx:5 - Access Denied} I get that message multiple times, with each file. If I then reinstall Erunt, it runs fine, but just that one time. The next time I try to run it, it fails the same way. Any suggestions as to what's wrong and how to fix it? It's in C:\WINDOWS . Some kind of file protection, like changing the permissions on the folder, after the fact ? I just tried reinstalling it again, this time not in C:\Windows, but in a folder on D: (a different physical drive). The same thing happened. It ran without a problem, but if I then try to rerun it, it fails the same way. I tested here, met resistance, and I tried this instead. Type "erunt" into start, and when Windows 7 finds it, right-click and select "Run as Administrator". If that works for you, perhaps looking into "RunAs" and making a permanent shortcut for it, can arrange for the program to be elevated all the time, when run to do a backup. http://technet.microsoft.com/en-us/l.../cc771525.aspx Paul |
#10
|
|||
|
|||
Windows XP Reg Files
On Thu, 06 Mar 2014 15:34:49 -0500, Paul wrote:
Ken Blake, MVP wrote: On Thu, 06 Mar 2014 14:29:42 -0500, Paul wrote: Ken Blake, MVP wrote: On Wed, 05 Mar 2014 12:48:59 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 12:46:56 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 13:14:17 -0500, Paul wrote: They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. I use Erunt here too (on Windows 8.1). For the last couple of weeks I've been having an odd problem with it; perhaps you or someone else here can help me with it. If I reinstall it, it runs fine. If I then try to run it again, it doesn't--not until I reinstall it again. Ignore the above (unless by chance that's enough information). I accidentally pressed Send before I was ready. I'll send it again tomorrow with more information. OK, here's what happens: I get the message Unable to create file C:\WINDOWS\ERDNT\3-6-2014\erdnt.inf Then if I proceed, I get the message [RegCreateKeyEx:5 - Access Denied} I get that message multiple times, with each file. If I then reinstall Erunt, it runs fine, but just that one time. The next time I try to run it, it fails the same way. Any suggestions as to what's wrong and how to fix it? It's in C:\WINDOWS . Some kind of file protection, like changing the permissions on the folder, after the fact ? I just tried reinstalling it again, this time not in C:\Windows, but in a folder on D: (a different physical drive). The same thing happened. It ran without a problem, but if I then try to rerun it, it fails the same way. I tested here, met resistance, and I tried this instead. Type "erunt" into start, and when Windows 7 finds it, right-click and select "Run as Administrator". That did it! Thanks very much. I should have thought of that myself, but I didn't, probably because it changed to not working so abruptly. If that works for you, perhaps looking into "RunAs" and making a permanent shortcut for it, can arrange for the program to be elevated all the time, when run to do a backup. http://technet.microsoft.com/en-us/l.../cc771525.aspx I basically run it every morning as a scheduled task. In that scheduled task, I just checked the box "Run with highest privileges," and I hope that fixes it there. |
#11
|
|||
|
|||
Windows XP Reg Files
Ken Blake, MVP wrote:
On Thu, 06 Mar 2014 15:34:49 -0500, Paul wrote: Ken Blake, MVP wrote: On Thu, 06 Mar 2014 14:29:42 -0500, Paul wrote: Ken Blake, MVP wrote: On Wed, 05 Mar 2014 12:48:59 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 12:46:56 -0700, "Ken Blake, MVP" wrote: On Wed, 05 Mar 2014 13:14:17 -0500, Paul wrote: They use ERUNT here. And if you make a restore point, it contains a copy of the registry files as well. I use Erunt here too (on Windows 8.1). For the last couple of weeks I've been having an odd problem with it; perhaps you or someone else here can help me with it. If I reinstall it, it runs fine. If I then try to run it again, it doesn't--not until I reinstall it again. Ignore the above (unless by chance that's enough information). I accidentally pressed Send before I was ready. I'll send it again tomorrow with more information. OK, here's what happens: I get the message Unable to create file C:\WINDOWS\ERDNT\3-6-2014\erdnt.inf Then if I proceed, I get the message [RegCreateKeyEx:5 - Access Denied} I get that message multiple times, with each file. If I then reinstall Erunt, it runs fine, but just that one time. The next time I try to run it, it fails the same way. Any suggestions as to what's wrong and how to fix it? It's in C:\WINDOWS . Some kind of file protection, like changing the permissions on the folder, after the fact ? I just tried reinstalling it again, this time not in C:\Windows, but in a folder on D: (a different physical drive). The same thing happened. It ran without a problem, but if I then try to rerun it, it fails the same way. I tested here, met resistance, and I tried this instead. Type "erunt" into start, and when Windows 7 finds it, right-click and select "Run as Administrator". That did it! Thanks very much. I should have thought of that myself, but I didn't, probably because it changed to not working so abruptly. If that works for you, perhaps looking into "RunAs" and making a permanent shortcut for it, can arrange for the program to be elevated all the time, when run to do a backup. http://technet.microsoft.com/en-us/l.../cc771525.aspx I basically run it every morning as a scheduled task. In that scheduled task, I just checked the box "Run with highest privileges," and I hope that fixes it there. I should have triggered on your error number sooner. If, with a modern OS, you see "error 5" in the dialog, then bumping yourself to Administrator is likely to fix it. I ran into that the first time, when trying to run PTEDIT32 (MBR editor) in Windows 7. And it needed to be run as administrator (just like the functional equivalent in Linux would have needed). Paul |
#12
|
|||
|
|||
Windows XP Reg Files
On Thu, 06 Mar 2014 19:31:02 -0500, Paul wrote:
Ken Blake, MVP wrote: I basically run it every morning as a scheduled task. In that scheduled task, I just checked the box "Run with highest privileges," and I hope that fixes it there. I should have triggered on your error number sooner. If, with a modern OS, you see "error 5" in the dialog, then bumping yourself to Administrator is likely to fix it. I didn't know that, so thanks for that info too! And checking the box in the taste scheduler "Run with highest privileges" worked fine. All is back to normal now. Thanks again. |
#13
|
|||
|
|||
Windows XP Reg Files
On Fri, 07 Mar 2014 08:44:05 -0700, "Ken Blake, MVP"
wrote: On Thu, 06 Mar 2014 19:31:02 -0500, Paul wrote: Ken Blake, MVP wrote: I basically run it every morning as a scheduled task. In that scheduled task, I just checked the box "Run with highest privileges," and I hope that fixes it there. I should have triggered on your error number sooner. If, with a modern OS, you see "error 5" in the dialog, then bumping yourself to Administrator is likely to fix it. I didn't know that, so thanks for that info too! And checking the box in the taste scheduler "Run with highest Some of my typos boggle my imagination. Where did "taste" come from? It should be "task," of course. It's also amazing to me that I don't see a typo when I type it, but I immediately see it when I read my message later. privileges" worked fine. All is back to normal now. Thanks again. |
#14
|
|||
|
|||
Windows XP Reg Files
Ken Blake, MVP wrote:
On Fri, 07 Mar 2014 08:44:05 -0700, "Ken Blake, MVP" wrote: On Thu, 06 Mar 2014 19:31:02 -0500, Paul wrote: Ken Blake, MVP wrote: I basically run it every morning as a scheduled task. In that scheduled task, I just checked the box "Run with highest privileges," and I hope that fixes it there. I should have triggered on your error number sooner. If, with a modern OS, you see "error 5" in the dialog, then bumping yourself to Administrator is likely to fix it. I didn't know that, so thanks for that info too! And checking the box in the taste scheduler "Run with highest Some of my typos boggle my imagination. Where did "taste" come from? It should be "task," of course. It's also amazing to me that I don't see a typo when I type it, but I immediately see it when I read my message later. I notice I make those mistakes too, and they seem to be getting worse with time. It's like your brain is taking a shortcut, and saying "this particular *sound* is spelled this particular way". The sound (in your head), of "Taste" is similar enough to "Task", to leap to the wrong conclusion. Maybe if you were a Tech Writer, and not drafting conversational English as much, this kind of "optimization" wouldn't happen. Paul |
#15
|
|||
|
|||
Windows XP Reg Files
On Fri, 07 Mar 2014 15:53:14 -0500, Paul wrote:
Ken Blake, MVP wrote: And checking the box in the taste scheduler "Run with highest Some of my typos boggle my imagination. Where did "taste" come from? It should be "task," of course. It's also amazing to me that I don't see a typo when I type it, but I immediately see it when I read my message later. I notice I make those mistakes too, and they seem to be getting worse with time. Ah, so you're getting older too? g It's like your brain is taking a shortcut, and saying "this particular *sound* is spelled this particular way". The sound (in your head), of "Taste" is similar enough to "Task", to leap to the wrong conclusion. Yes! My understanding is that that's what happens. Maybe if you were a Tech Writer, and not drafting conversational English as much, this kind of "optimization" wouldn't happen. I've done a fair amount of tech writing in my time, I still do some of it, and I'm probably about to begin a new tech writing undertaking. And despite the errors I myself make and don't see, I'm also very good at proofreading what others have written. |
|
Thread Tools | |
Display Modes | |
|
|