If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
Ads |
#2
|
|||
|
|||
Cloning from 2TB disk to 3TB disk
My 2 TB Win XP disk is almost full, so I've been trying to transfer
the content to a new 3TB disk. I first used Paragon Hard Disk Manager 2009 Suite but it failed to recognize its partitions (all red marked). Then, thinking this version was not desined to handle a disk larger than 2TB, I bought Paragon Hard Disk Manager 15 Suite. The cloning process was completed on the screen. When I started the computer, it showed boot menu so I chose Normally, but as soon as Win XP logo appeared it crashed and restarted. If I chose Safe Mode, the result is the same. Finally, I downlorded Clonezilla Live and used its Default setting. Everything appeared normal. But when the computer started, the result was exactly same as with Paragone. It seems that, because booting happens up to Win XP logo appears, failure may have something to do with MBR. During cloning with Clonezilla, MBR must change to GUID.Perhaps my MOB (Gigabyte B75M-D3H and Asus P8Z77-V Pro) cann not boot 3TB disk? I do not want to switch to Win 7 or above, if this is the problem. Your help will be most appreciated. |
Thread Tools | |
Display Modes | |
|
|