If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Loss of network connection after standby or hibernate
Greetings!
I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
Ads |
#2
|
|||
|
|||
Loss of network connection after standby or hibernate
Actually Intel has released a 802.11g mini PCI card for the Centrino
platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#3
|
|||
|
|||
Loss of network connection after standby or hibernate
Actually Intel has released a 802.11g mini PCI card for the Centrino
platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#4
|
|||
|
|||
Loss of network connection after standby or hibernate
Actually Intel has released a 802.11g mini PCI card for the Centrino
platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#5
|
|||
|
|||
Loss of network connection after standby or hibernate
Actually Intel has released a 802.11g mini PCI card for the Centrino
platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#6
|
|||
|
|||
Loss of network connection after standby or hibernate
Actually Intel has released a 802.11g mini PCI card for the Centrino
platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#7
|
|||
|
|||
Loss of network connection after standby or hibernate
Actually Intel has released a 802.11g mini PCI card for the Centrino
platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#8
|
|||
|
|||
Loss of network connection after standby or hibernate
802.11g is not native to Centrino platform that's why there are problems. AS
far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#9
|
|||
|
|||
Loss of network connection after standby or hibernate
802.11g is not native to Centrino platform that's why there are problems. AS
far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#10
|
|||
|
|||
Loss of network connection after standby or hibernate
Xref: kermit comp.os.ms-windows.networking.windows:35071 microsoft.public.windowsxp.network_web:199100
WTF??? Chris why do you removed "s" from "msmobiles.com" in your quotes below? the name is http://msmobiles.com and you know it very well. Chris De Herrera I warn you: don't behave like Jason Dunn from pocket pc thoughts!!!! changing name of posters in quotes - is it behavior worthy of Microsoft MVP?? I don't think so. It is respectsless and rude behavior. Who is MVP lead for Tablet PC? I need to inform them.. "Chris De Herrera" schrieb im Newsbeitrag ... Actually Intel has released a 802.11g mini PCI card for the Centrino platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#11
|
|||
|
|||
Loss of network connection after standby or hibernate
Xref: kermit comp.os.ms-windows.networking.windows:35071 microsoft.public.windowsxp.network_web:199100
WTF??? Chris why do you removed "s" from "msmobiles.com" in your quotes below? the name is http://msmobiles.com and you know it very well. Chris De Herrera I warn you: don't behave like Jason Dunn from pocket pc thoughts!!!! changing name of posters in quotes - is it behavior worthy of Microsoft MVP?? I don't think so. It is respectsless and rude behavior. Who is MVP lead for Tablet PC? I need to inform them.. "Chris De Herrera" schrieb im Newsbeitrag ... Actually Intel has released a 802.11g mini PCI card for the Centrino platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#12
|
|||
|
|||
Loss of network connection after standby or hibernate
Xref: kermit comp.os.ms-windows.networking.windows:35071 microsoft.public.windowsxp.network_web:199100
WTF??? Chris why do you removed "s" from "msmobiles.com" in your quotes below? the name is http://msmobiles.com and you know it very well. Chris De Herrera I warn you: don't behave like Jason Dunn from pocket pc thoughts!!!! changing name of posters in quotes - is it behavior worthy of Microsoft MVP?? I don't think so. It is respectsless and rude behavior. Who is MVP lead for Tablet PC? I need to inform them.. "Chris De Herrera" schrieb im Newsbeitrag ... Actually Intel has released a 802.11g mini PCI card for the Centrino platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#13
|
|||
|
|||
Loss of network connection after standby or hibernate
Xref: kermit comp.os.ms-windows.networking.windows:35071 microsoft.public.windowsxp.network_web:199100
WTF??? Chris why do you removed "s" from "msmobiles.com" in your quotes below? the name is http://msmobiles.com and you know it very well. Chris De Herrera I warn you: don't behave like Jason Dunn from pocket pc thoughts!!!! changing name of posters in quotes - is it behavior worthy of Microsoft MVP?? I don't think so. It is respectsless and rude behavior. Who is MVP lead for Tablet PC? I need to inform them.. "Chris De Herrera" schrieb im Newsbeitrag ... Actually Intel has released a 802.11g mini PCI card for the Centrino platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#14
|
|||
|
|||
Loss of network connection after standby or hibernate
Xref: kermit comp.os.ms-windows.networking.windows:35071 microsoft.public.windowsxp.network_web:199100
WTF??? Chris why do you removed "s" from "msmobiles.com" in your quotes below? the name is http://msmobiles.com and you know it very well. Chris De Herrera I warn you: don't behave like Jason Dunn from pocket pc thoughts!!!! changing name of posters in quotes - is it behavior worthy of Microsoft MVP?? I don't think so. It is respectsless and rude behavior. Who is MVP lead for Tablet PC? I need to inform them.. "Chris De Herrera" schrieb im Newsbeitrag ... Actually Intel has released a 802.11g mini PCI card for the Centrino platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
#15
|
|||
|
|||
Loss of network connection after standby or hibernate
Xref: kermit comp.os.ms-windows.networking.windows:35071 microsoft.public.windowsxp.network_web:199100
WTF??? Chris why do you removed "s" from "msmobiles.com" in your quotes below? the name is http://msmobiles.com and you know it very well. Chris De Herrera I warn you: don't behave like Jason Dunn from pocket pc thoughts!!!! changing name of posters in quotes - is it behavior worthy of Microsoft MVP?? I don't think so. It is respectsless and rude behavior. Who is MVP lead for Tablet PC? I need to inform them.. "Chris De Herrera" schrieb im Newsbeitrag ... Actually Intel has released a 802.11g mini PCI card for the Centrino platform. This is a new chip - Intel Pro/Wireless 2200BG chip. The latest Tablet PCs use it to implement 802.11g and still be a Centrino. -- Chris De Herrera http://www.cewindows.net http://www.tabletpctalk.com "www.msmobile.com" wrote in message ... 802.11g is not native to Centrino platform that's why there are problems. AS far as I am concerned I am enjoying built-in centrino 802.11b although i have also 802.11g card.. "Teffy" schrieb im Newsbeitrag om... Greetings! I have a Toshiba M200 TabletPC (WinXP) which came with an 802.11g wireless card. I connect to a D-Link DI-624 router. If I go to Standby or Hibernate then resume, I have no wireless network access at all. To get it to work again, I must disable then re-enable the 'Wireless Network Connection' via steps below: 1) Go to "View Network Connections" from "My Network Places" or by right-clicking the wireless network icon in the system tray. 2) Right-click "Wireless Network Connection" and choose "Disable" 3) Wait for it to display the new disabled status (for me, 5-10 seconds). 4) Right-click "Wireless Network Connection" again and choose "Enable" Is this a problem with settings somewhere in the network configuration? Does everyone get the same behavior after resuming from standby or hibernate? For me, it happens every time. If you don't know the solution, but have an easier way to disable then re-enable, please do tell. Teffy |
Thread Tools | |
Display Modes | |
|
|