A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » General XP issues or comments
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Getting Windows XP to remember folder settings.



 
 
Thread Tools Display Modes
  #1  
Old November 22nd 04, 05:59 AM
S_Nyaya
external usenet poster
 
Posts: n/a
Default Getting Windows XP to remember folder settings.

Hi,

This has been asked jolly many times before!

From some days ago, folders cannot seem to remember the settings I had set
originally - view all items as icons. Now I find that some folders display
files and sub-folders as thumbnails and some as tiles.

I did the registry hack (Bags MRU) to take care of the 'last 400 settings'
issue - in fact the settings are at 8000.

Almost all folders within all five hard drives on this machine never seem to
remember their view settings!

Also some windows are maximized and minimized other times when opened!

ToolsFolder OptionsViewApply to All Folders is set correctly. So is the
setting in the window to 'remember each folders' view settings". Nothing
works.

Does not affect performance of this machine in the slightest - but remains
an annoyance, especially more so as I cannot locate a cause or remedy!

Thanks in advance.

Satyanyaya



Ads
  #2  
Old November 22nd 04, 07:47 AM
S_Nyaya
external usenet poster
 
Posts: n/a
Default Getting Windows XP to remember folder settings.

Hi,

To add: The folders also do not seem to remember their Customization
settings. Sometimes the Documents and SettingsAdministrator folder would
show as being a video folder. Or, the Windows folder would show as a Music
file folder!

Harmless but really annoying!

Regards.

Satyanyaya

"S_Nyaya" wrote in message
...
Hi,

This has been asked jolly many times before!

From some days ago, folders cannot seem to remember the settings I had set
originally - view all items as icons. Now I find that some folders display
files and sub-folders as thumbnails and some as tiles.

I did the registry hack (Bags MRU) to take care of the 'last 400 settings'
issue - in fact the settings are at 8000.

Almost all folders within all five hard drives on this machine never seem
to
remember their view settings!

Also some windows are maximized and minimized other times when opened!

ToolsFolder OptionsViewApply to All Folders is set correctly. So is the
setting in the window to 'remember each folders' view settings". Nothing
works.

Does not affect performance of this machine in the slightest - but remains
an annoyance, especially more so as I cannot locate a cause or remedy!

Thanks in advance.

Satyanyaya





  #3  
Old November 22nd 04, 08:31 AM
Kelly
external usenet poster
 
Posts: n/a
Default Getting Windows XP to remember folder settings.

Maybe your setting needs to be changed? Without knowing more, that is all I
can suggest. Good luck!

--
All the Best,
Kelly (MS-MVP)

Troubleshooting Windows XP
http://www.kellys-korner-xp.com

*HBTM*

"S_Nyaya" wrote in message
...
Hi,

This has been asked jolly many times before!

From some days ago, folders cannot seem to remember the settings I had set
originally - view all items as icons. Now I find that some folders display
files and sub-folders as thumbnails and some as tiles.

I did the registry hack (Bags MRU) to take care of the 'last 400 settings'
issue - in fact the settings are at 8000.

Almost all folders within all five hard drives on this machine never seem
to
remember their view settings!

Also some windows are maximized and minimized other times when opened!

ToolsFolder OptionsViewApply to All Folders is set correctly. So is the
setting in the window to 'remember each folders' view settings". Nothing
works.

Does not affect performance of this machine in the slightest - but remains
an annoyance, especially more so as I cannot locate a cause or remedy!

Thanks in advance.

Satyanyaya





  #4  
Old November 22nd 04, 09:04 AM
David Candy
external usenet poster
 
Posts: n/a
Default Getting Windows XP to remember folder settings.

I've not ever seen a need to increase the store. It defaults to more =
than 400 in SP2 but 400 is ample and 8000 is a great big f*cking waste =
of space and memory. Each time I've checked I've used no more than 200 =
slots. At the moment I'm up to 208 and that's over months.



The store may be corrupt. Type regedit in Start Run and delete all these =
keys. Then read the last section carefully (Apply to All).

Delete these keys or values from the registry. This will reset many =
things like saved folder settings.
Type Regedit in Start - Run
Click Start - Turn Off Computer (or maybe Shutdown) - Ctrl + Alt + Shift =
+ click Cancel (or Close) (your Desktop and Start Menu now disappear). =
This is a clean shutdown unlike using Task Manager.


In Regedit navigate to each of these keys and delete them
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer and =
delete the value
Shellstate

HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\Cabi=
netState and delete the value
Settings

HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\Stre=
ams
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\Stre=
amsMRU (may not exist)
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell \BagMRU
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell \Bags
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell NoRoam\BagMRU
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell NoRoam\Bags
[the above one is what reset deletes, 90% of the time it is sufficient =
but 10% of the time the BagMRU needs to be deleted too. If you know what =
cross linked files are the same thing is happening here - the BagMRU =
point to the wrong Bag or serveral BagMRU point to the same bag]



Then in Task Manager, File - Run type explorer. (Start menu and Desktop =
come back).

You then need to reconfigure explorer and the desktop.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D

Understanding Saved Views and Browsing Folders
In Windows 2000 Professional, the view you use is not always permanently =
saved in Windows Explorer. You can control whether the views you use are =
saved permanently or temporarily by using the Remember each folder's =
view settings check box on the View tab of the Folder Options dialog box =
(see figure 9.3).=20

By default the Remember each folder's view settings option is enabled. =
When you choose to leave this setting enabled, the following happens:=20

a.. The changes you make to a folder's view is automatically saved =
when you close the folder.=20
b.. The view you use to view one folder is not applied to other =
folders.=20
c.. When you open a folder, it opens in the view you used when you =
last viewed it.=20
When you clear the check box for Remember each folder's view settings, =
the following happens:=20

a.. When you start Windows Explorer, the first folder you view =
displays in the folder's saved view. Windows Explorer holds that view in =
temporary memory and applies it to all the folders that you visit while =
Windows Explorer remains open unless you manually alter the view.=20
b.. As you browse to other folders (after the initial folder is =
opened), the saved view for each folder is ignored, and when you quit =
Windows Explorer, the folder view that you have been using to view =
multiple folders is deleted from temporary memory.=20
c.. The next time you open Windows Explorer, once again, it is the =
saved view of the first folder you open that determines how you view =
multiple folders.=20
Setting All Folders to the Same View
Some users want to have all their Windows Explorer folders set to the =
same view. In Windows 2000 Professional, the default setting is that any =
change made to a folder's view is automatically saved when you close the =
folder and is not applied to other folders. However, you can set all =
folders to the same view by using the Folder Options command as =
described in the following procedure.=20

To set all folders to the same view=20
1.. In My Computer or Windows Explorer, set the view to your =
preference.=20
2.. On the Tools menu, click Folder Options.=20
3.. In the Folder Options dialog box, click the View tab.=20
4.. Under Folder Views, click Like Current Folder.=20
Important The Remember each folder's view settings check box on the View =
tab of the Folder Options dialog box (see Figure 9.3) affects how the =
view settings of individual folders are applied and saved. For more =
information about the impact of clearing this check box, see =
"Understanding Saved Views and Browsing Folders" earlier in this =
chapter.=20

Windows 2000 Resource Kit

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D

And check

NoSaveSettings=20
HKCU\Software\Microsoft\Windows\CurrentVersion\Pol icies\Explorer=20
Data type Range Default value=20
REG_DWORD 0 | 1 0 =20

Description
Prevents users from saving certain changes to the=20
desktop. Users can change the desktop, but some changes,=20
such as the positions of open windows and the size and=20
position of the taskbar, are not saved when users log=20
off. Shortcuts placed on the desktop are always saved.

This entry stores the setting of the Don't save settings=20
at exit Group Policy. Group Policy adds this entry to the=20
registry with a value of 1 when you enable the policy. If=20
you disable the policy or set it to Not configured, Group=20
Policy deletes the entry from the registry and the system=20
behaves as though the value is 0.

Value Meaning=20
0 (or not in registry) The policy is disabled or=20
not configured. Changes to the desktop are saved.=20
1 The policy is enabled. Some changes to the desktop are not saved.=20

Windows 2000 Resource Kit Reference

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D

Saved folder settings are stored in BagMRU. Defaults and =
network/removable drives are stored in Streams key (as everything was in =
earlier versions).=20

You have to do Apply To All while in a file folder.=20
For each type of object (File Folder, Control Panel, My Computer, etc) =
that you do an Apply to All in it's clsid and the settings are =
created/updated at=20
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\Stre=
ams\Defaults=20

{F3364BA0-65B9-11CE-A9BA-00AA004AE837} is ordinary folders, and other =
numbers are what ever they are (My Comp, Control Panel, etc - note My =
Docs is an ordinary folder). They only appear IF you do an apply to all =
in that type of object.

as well as a higher set of defaults at=20
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\Stre=
ams=20
Settings=3D=20

So the point being in the order that you do things. You want to do your =
overall default setting last. This is how I advised someone who asked

Can someone please tell me how to force Windows to keep=20
the seperate folder view settings I choose? I have=20
checked and rechecked the box in folder options for it to=20
remember, but it has no memory for that issue. To be more=20
specific; I want to always have the thumbnail view in My=20
Pictures and also in the Control Panel Dialog, but every=20
time I open them I have to manually set that view.



Set Control Panel how you want then Tools - View - Apply To All Folders. =
This sets the global default and the Control Panel type of objects =
defaults (but the system default remains the same - it can't be changed =
but all other defaults/settings override it). Then go to an ordinary =
folder (as My Pics is for this feature) and set it how you want all =
folders but CP. Then Tools - View - Apply To All Folders. This sets the =
global default and the file folder type of object defaults (CP's default =
settings will still override the global). Then set My Pics how you want =
it and do nothing else as we are saving it by the checkbox Remember =
Folder Settings AND BY THE PATH WE GOT THERE. EG

Desktop\My Comp\C:\Documents & Settings\user name\My Docs\My Pics
is a different setting to
Desktop\My Comp\My Docs\My Pics

There is some searching for similar settings but the path used, if too =
different, means it won't find the settings for similar named folders.

The system defaults (and saved settings for individual folders already =
opened) are the only setting unless you've done an Apply To All, eg no =
global or type defaults.



Plus if you hold down control and click close while in a file folder it =
also updates=20
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer=20
Shellstate=3D=20

This is mainly setting irrelevent things except it holds the global =
sort, which all the others override. But File Open dialog boxes only use =
this setting, so it basically only affects sorting in File Open dialogs. =
But it seems that sometimes an earlier windows versions setting get =
written here and other settings then aren't saved




--=20
----------------------------------------------------------
http://www.uscricket.com
"S_Nyaya" wrote in message =
...
Hi,
=20
This has been asked jolly many times before!
=20
From some days ago, folders cannot seem to remember the settings I had =

set
originally - view all items as icons. Now I find that some folders =

display
files and sub-folders as thumbnails and some as tiles.
=20
I did the registry hack (Bags MRU) to take care of the 'last 400 =

settings'
issue - in fact the settings are at 8000.
=20
Almost all folders within all five hard drives on this machine never =

seem to
remember their view settings!
=20
Also some windows are maximized and minimized other times when opened!
=20
ToolsFolder OptionsViewApply to All Folders is set correctly. So is =

the
setting in the window to 'remember each folders' view settings". =

Nothing
works.
=20
Does not affect performance of this machine in the slightest - but =

remains
an annoyance, especially more so as I cannot locate a cause or remedy!
=20
Thanks in advance.
=20
Satyanyaya
=20
=20

  #5  
Old November 22nd 04, 09:13 AM
Kelly
external usenet poster
 
Posts: n/a
Default Getting Windows XP to remember folder settings.

Hope all is well, David. )

--
All the Best,
Kelly (MS-MVP)

Troubleshooting Windows XP
http://www.kellys-korner-xp.com

*HBTM*

"David Candy" . wrote in message
...
I've not ever seen a need to increase the store. It defaults to more than
400 in SP2 but 400 is ample and 8000 is a great big f*cking waste of space
and memory. Each time I've checked I've used no more than 200 slots. At the
moment I'm up to 208 and that's over months.



The store may be corrupt. Type regedit in Start Run and delete all these
keys. Then read the last section carefully (Apply to All).

Delete these keys or values from the registry. This will reset many things
like saved folder settings.
Type Regedit in Start - Run
Click Start - Turn Off Computer (or maybe Shutdown) - Ctrl + Alt + Shift +
click Cancel (or Close) (your Desktop and Start Menu now disappear). This is
a clean shutdown unlike using Task Manager.


In Regedit navigate to each of these keys and delete them
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer and
delete the value
Shellstate

HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\CabinetState
and delete the value
Settings

HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\Streams
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\StreamsMRU
(may not exist)
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell \BagMRU
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell \Bags
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell NoRoam\BagMRU
HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell NoRoam\Bags
[the above one is what reset deletes, 90% of the time it is sufficient but
10% of the time the BagMRU needs to be deleted too. If you know what cross
linked files are the same thing is happening here - the BagMRU point to the
wrong Bag or serveral BagMRU point to the same bag]



Then in Task Manager, File - Run type explorer. (Start menu and Desktop come
back).

You then need to reconfigure explorer and the desktop.

================================================== =================

Understanding Saved Views and Browsing Folders
In Windows 2000 Professional, the view you use is not always permanently
saved in Windows Explorer. You can control whether the views you use are
saved permanently or temporarily by using the Remember each folder's view
settings check box on the View tab of the Folder Options dialog box (see
figure 9.3).

By default the Remember each folder's view settings option is enabled. When
you choose to leave this setting enabled, the following happens:

a.. The changes you make to a folder's view is automatically saved when
you close the folder.
b.. The view you use to view one folder is not applied to other folders.
c.. When you open a folder, it opens in the view you used when you last
viewed it.
When you clear the check box for Remember each folder's view settings, the
following happens:

a.. When you start Windows Explorer, the first folder you view displays in
the folder's saved view. Windows Explorer holds that view in temporary
memory and applies it to all the folders that you visit while Windows
Explorer remains open unless you manually alter the view.
b.. As you browse to other folders (after the initial folder is opened),
the saved view for each folder is ignored, and when you quit Windows
Explorer, the folder view that you have been using to view multiple folders
is deleted from temporary memory.
c.. The next time you open Windows Explorer, once again, it is the saved
view of the first folder you open that determines how you view multiple
folders.
Setting All Folders to the Same View
Some users want to have all their Windows Explorer folders set to the same
view. In Windows 2000 Professional, the default setting is that any change
made to a folder's view is automatically saved when you close the folder and
is not applied to other folders. However, you can set all folders to the
same view by using the Folder Options command as described in the following
procedure.

To set all folders to the same view
1.. In My Computer or Windows Explorer, set the view to your preference.
2.. On the Tools menu, click Folder Options.
3.. In the Folder Options dialog box, click the View tab.
4.. Under Folder Views, click Like Current Folder.
Important The Remember each folder's view settings check box on the View tab
of the Folder Options dialog box (see Figure 9.3) affects how the view
settings of individual folders are applied and saved. For more information
about the impact of clearing this check box, see "Understanding Saved Views
and Browsing Folders" earlier in this chapter.

Windows 2000 Resource Kit

================================================== ========================

And check

NoSaveSettings
HKCU\Software\Microsoft\Windows\CurrentVersion\Pol icies\Explorer
Data type Range Default value
REG_DWORD 0 | 1 0

Description
Prevents users from saving certain changes to the
desktop. Users can change the desktop, but some changes,
such as the positions of open windows and the size and
position of the taskbar, are not saved when users log
off. Shortcuts placed on the desktop are always saved.

This entry stores the setting of the Don't save settings
at exit Group Policy. Group Policy adds this entry to the
registry with a value of 1 when you enable the policy. If
you disable the policy or set it to Not configured, Group
Policy deletes the entry from the registry and the system
behaves as though the value is 0.

Value Meaning
0 (or not in registry) The policy is disabled or
not configured. Changes to the desktop are saved.
1 The policy is enabled. Some changes to the desktop are not saved.

Windows 2000 Resource Kit Reference

================================================== ==========================

Saved folder settings are stored in BagMRU. Defaults and network/removable
drives are stored in Streams key (as everything was in earlier versions).

You have to do Apply To All while in a file folder.
For each type of object (File Folder, Control Panel, My Computer, etc) that
you do an Apply to All in it's clsid and the settings are created/updated at
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\Streams\Defaults

{F3364BA0-65B9-11CE-A9BA-00AA004AE837} is ordinary folders, and other
numbers are what ever they are (My Comp, Control Panel, etc - note My Docs
is an ordinary folder). They only appear IF you do an apply to all in that
type of object.

as well as a higher set of defaults at
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\Streams
Settings=

So the point being in the order that you do things. You want to do your
overall default setting last. This is how I advised someone who asked

Can someone please tell me how to force Windows to keep
the seperate folder view settings I choose? I have
checked and rechecked the box in folder options for it to
remember, but it has no memory for that issue. To be more
specific; I want to always have the thumbnail view in My
Pictures and also in the Control Panel Dialog, but every
time I open them I have to manually set that view.



Set Control Panel how you want then Tools - View - Apply To All Folders.
This sets the global default and the Control Panel type of objects defaults
(but the system default remains the same - it can't be changed but all other
defaults/settings override it). Then go to an ordinary folder (as My Pics is
for this feature) and set it how you want all folders but CP. Then Tools -
View - Apply To All Folders. This sets the global default and the file
folder type of object defaults (CP's default settings will still override
the global). Then set My Pics how you want it and do nothing else as we are
saving it by the checkbox Remember Folder Settings AND BY THE PATH WE GOT
THERE. EG

Desktop\My Comp\C:\Documents & Settings\user name\My Docs\My Pics
is a different setting to
Desktop\My Comp\My Docs\My Pics

There is some searching for similar settings but the path used, if too
different, means it won't find the settings for similar named folders.

The system defaults (and saved settings for individual folders already
opened) are the only setting unless you've done an Apply To All, eg no
global or type defaults.



Plus if you hold down control and click close while in a file folder it also
updates
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer
Shellstate=

This is mainly setting irrelevent things except it holds the global sort,
which all the others override. But File Open dialog boxes only use this
setting, so it basically only affects sorting in File Open dialogs. But it
seems that sometimes an earlier windows versions setting get written here
and other settings then aren't saved




--
----------------------------------------------------------
http://www.uscricket.com
"S_Nyaya" wrote in message
...
Hi,

This has been asked jolly many times before!

From some days ago, folders cannot seem to remember the settings I had set
originally - view all items as icons. Now I find that some folders display
files and sub-folders as thumbnails and some as tiles.

I did the registry hack (Bags MRU) to take care of the 'last 400 settings'
issue - in fact the settings are at 8000.

Almost all folders within all five hard drives on this machine never seem
to
remember their view settings!

Also some windows are maximized and minimized other times when opened!

ToolsFolder OptionsViewApply to All Folders is set correctly. So is the
setting in the window to 'remember each folders' view settings". Nothing
works.

Does not affect performance of this machine in the slightest - but remains
an annoyance, especially more so as I cannot locate a cause or remedy!

Thanks in advance.

Satyanyaya





  #6  
Old November 22nd 04, 03:16 PM
S_Nyaya
external usenet poster
 
Posts: n/a
Default Getting Windows XP to remember folder settings.

Hi,

Thanks for the responses, David and Kelly.

I shall try out the way suggested by David sometime later and post my
experience.

Regards.

Satyanyaya
-----------------

"S_Nyaya" wrote in message
...
Hi,

This has been asked jolly many times before!

From some days ago, folders cannot seem to remember the settings I had set
originally - view all items as icons. Now I find that some folders display
files and sub-folders as thumbnails and some as tiles.

I did the registry hack (Bags MRU) to take care of the 'last 400 settings'
issue - in fact the settings are at 8000.

Almost all folders within all five hard drives on this machine never seem
to
remember their view settings!

Also some windows are maximized and minimized other times when opened!

ToolsFolder OptionsViewApply to All Folders is set correctly. So is the
setting in the window to 'remember each folders' view settings". Nothing
works.

Does not affect performance of this machine in the slightest - but remains
an annoyance, especially more so as I cannot locate a cause or remedy!

Thanks in advance.

Satyanyaya





  #7  
Old November 23rd 04, 07:53 AM
Kelly
external usenet poster
 
Posts: n/a
Default Getting Windows XP to remember folder settings.

Most welcome and good luck!

--
All the Best,
Kelly (MS-MVP)

Troubleshooting Windows XP
http://www.kellys-korner-xp.com

*HBTM*

"S_Nyaya" wrote in message
...
Hi,

Thanks for the responses, David and Kelly.

I shall try out the way suggested by David sometime later and post my
experience.

Regards.

Satyanyaya
-----------------

"S_Nyaya" wrote in message
...
Hi,

This has been asked jolly many times before!

From some days ago, folders cannot seem to remember the settings I had
set
originally - view all items as icons. Now I find that some folders
display
files and sub-folders as thumbnails and some as tiles.

I did the registry hack (Bags MRU) to take care of the 'last 400
settings'
issue - in fact the settings are at 8000.

Almost all folders within all five hard drives on this machine never seem
to
remember their view settings!

Also some windows are maximized and minimized other times when opened!

ToolsFolder OptionsViewApply to All Folders is set correctly. So is
the
setting in the window to 'remember each folders' view settings". Nothing
works.

Does not affect performance of this machine in the slightest - but
remains
an annoyance, especially more so as I cannot locate a cause or remedy!

Thanks in advance.

Satyanyaya







 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Removing "BagsMRU" from registry David Candy Customizing Windows XP 9 March 12th 05 11:39 PM
Can't make specific folders consistently open in Thumbnail Flycaster General XP issues or comments 7 September 15th 04 11:36 AM
FOLDERS VIEW FORGOTTEN - TRIED EVERYTHING!!!!! Paolo Customizing Windows XP 7 August 23rd 04 08:30 PM
Unable to save "details" folder view in explorer.exe Charlie Moore General XP issues or comments 3 August 5th 04 09:30 AM
Folder settings not retained Greg P Windows XP Help and Support 7 August 5th 04 12:14 AM






All times are GMT +1. The time now is 09:44 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.