If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
cd burning issue
Hi all
winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc |
Ads |
#2
|
|||
|
|||
cd burning issue
"p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc Can you read a cd or dvd with this drive? Jim |
#3
|
|||
|
|||
cd burning issue
"Jim" wrote in message
... "p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc Can you read a cd or dvd with this drive? Jim Yes, on both drives thanks. |
#4
|
|||
|
|||
cd burning issue
Is error correction enabled on your drive properties in media player options?
If yes are you sure you have the software supplied with your drive (standard). If yes your drive might now be faulty take it to a computer technician let him test the drive and stop worrying yourself with so much other twang! "p.mc" wrote: "Jim" wrote in message ... "p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc Can you read a cd or dvd with this drive? Jim Yes, on both drives thanks. |
#5
|
|||
|
|||
cd burning issue
Failure on both drives would be unusual.. check in the drives properties
there should be a Recording tab and a check mark on "Enable CD Recording on this drive". If no tab is available, check the fix in Kelly's Korner http://www.kellys-korner-xp.com/xp_tweak_bookmarks.htm ------------------------------------ "Jim" wrote in message ... "p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc Can you read a cd or dvd with this drive? Jim |
#6
|
|||
|
|||
cd burning issue
If the Recording tab isn't available, find the registry fix here.
http://www.kellys-korner-xp.com/xp_tweaks.htm ------------------ "p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc |
#7
|
|||
|
|||
cd burning issue
Sorry, clicked on the wrong message.
--------------------------------------------- "Ronaldo" wrote in message ... Failure on both drives would be unusual.. check in the drives properties there should be a Recording tab and a check mark on "Enable CD Recording on this drive". If no tab is available, check the fix in Kelly's Korner http://www.kellys-korner-xp.com/xp_tweak_bookmarks.htm ------------------------------------ "Jim" wrote in message ... "p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc Can you read a cd or dvd with this drive? Jim |
#8
|
|||
|
|||
cd burning issue
Fix is on Line 23. Allow or Disable CD Burn Options
http://www.kellys-korner-xp.com/xp_tweaks.htm ---------------------------------- "Ronaldo" wrote in message ... If the Recording tab isn't available, find the registry fix here. http://www.kellys-korner-xp.com/xp_tweaks.htm ------------------ "p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc |
#9
|
|||
|
|||
cd burning issue
Update
Error correction (PJG's post) wasn't checked so tried that, but to no avail. Tried kelly's Korner link...No joy. I've been juggling "Enable CD Recording on this drive" on both drives just to make sure one wasn't faulty. Flashed Bios. Updated Nvidia chipset. Uninstalled both optical drives and let windows load em back. Uninstalled I-tunes Ver 8 (Trying anything) Changed from DMA to PIO and back. Made sure IMAPI (or was it ATAPI?) runs automatically in services. Googled intensly and found others with same issue different drives and systems but no real fix. Insatalled logitechs ASPI layer ( early Version, as stated "More stable") and checked with ASPI checker. Changed WMP from 9 to 11. Removed KB929399 (read somewhere gave probs) no joy re- installed fix. Don't really want to get into opening up and checking cables & power supplies if possible due to unlikely event of both drives failing simultaneously. I can burn/read dvd data on both drives, read on both CD drives but not burn CD data. But still none the wiser. I don't know what else I can try...Anything I've missed? -- Regards p.mc "Ronaldo" wrote in message ... Fix is on Line 23. Allow or Disable CD Burn Options http://www.kellys-korner-xp.com/xp_tweaks.htm ---------------------------------- "Ronaldo" wrote in message ... If the Recording tab isn't available, find the registry fix here. http://www.kellys-korner-xp.com/xp_tweaks.htm ------------------ "p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc |
#10
|
|||
|
|||
cd burning issue
I had a DVD/CD burner that would burn DVDs, read CDS and DVDS but would not
burn CDs. Research showed there are two different lasers for DVD burners, one for CDS and one for DVD. Can you burn a DVD? If so, both drives may be faulty. K -- Disclaimer: The information has been posted "as is" with no warranties or guarantees and doesn''t give any rights. "p.mc" wrote: Update Error correction (PJG's post) wasn't checked so tried that, but to no avail. Tried kelly's Korner link...No joy. I've been juggling "Enable CD Recording on this drive" on both drives just to make sure one wasn't faulty. Flashed Bios. Updated Nvidia chipset. Uninstalled both optical drives and let windows load em back. Uninstalled I-tunes Ver 8 (Trying anything) Changed from DMA to PIO and back. Made sure IMAPI (or was it ATAPI?) runs automatically in services. Googled intensly and found others with same issue different drives and systems but no real fix. Insatalled logitechs ASPI layer ( early Version, as stated "More stable") and checked with ASPI checker. Changed WMP from 9 to 11. Removed KB929399 (read somewhere gave probs) no joy re- installed fix. Don't really want to get into opening up and checking cables & power supplies if possible due to unlikely event of both drives failing simultaneously. I can burn/read dvd data on both drives, read on both CD drives but not burn CD data. But still none the wiser. I don't know what else I can try...Anything I've missed? -- Regards p.mc "Ronaldo" wrote in message ... Fix is on Line 23. Allow or Disable CD Burn Options http://www.kellys-korner-xp.com/xp_tweaks.htm ---------------------------------- "Ronaldo" wrote in message ... If the Recording tab isn't available, find the registry fix here. http://www.kellys-korner-xp.com/xp_tweaks.htm ------------------ "p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc |
#11
|
|||
|
|||
cd burning issue
"p.mc" p@mc wrote in message
... I can burn/read dvd data on both drives, read on both CD drives but not burn CD data. Please clarify. These are both DVD drives, correct? (both are LH-20A1H, correct?) You can burn data onto CDs using them both, correct? (Data is data.) It sounds like you cannot create an audio CD on either, correct? Have you tried creating a DVD (that is, a DVD that will play on a DVD player)? Have you checked Event Viewer for any error reports? I've never used WMP, so I can't help you there. How about using CDBurnerXP (a superior program IMO)? If you still have a problem, you can post in their forum: http://cdburnerxp.se/ Also, how large is your hard drive and how much free space does it have? Were you *ever* able to create audio CDs on this PC? What is the make and model? |
#12
|
|||
|
|||
cd burning issue
How is your harddrive on available space?
Have you made any virtual memory changes? (50% over RAM for minimum and 300% for maximum) Have you tried uninstalling the Secondary IDE Channel, the restarting? Right click My Computer\Manage\Device Manager\right click ID Channel, Uninstall The IDE Digital cable, is it an 80 strand? What UDMA mode is it running on... five, six? Sorry but this is all I can think of... the problem seems very uncommon and since it affects both drives on the same function, I can't help but suspect it is related to power wiring or supply or bad digital wiring.. a bad IDE digital cable would affect both drives on the same functions, low power would also come up short when it came to burning, so you may have to open the box as last hope. ----------------------------------------- "p.mc" p@mc wrote in message ... Update Error correction (PJG's post) wasn't checked so tried that, but to no avail. Tried kelly's Korner link...No joy. I've been juggling "Enable CD Recording on this drive" on both drives just to make sure one wasn't faulty. Flashed Bios. Updated Nvidia chipset. Uninstalled both optical drives and let windows load em back. Uninstalled I-tunes Ver 8 (Trying anything) Changed from DMA to PIO and back. Made sure IMAPI (or was it ATAPI?) runs automatically in services. Googled intensly and found others with same issue different drives and systems but no real fix. Insatalled logitechs ASPI layer ( early Version, as stated "More stable") and checked with ASPI checker. Changed WMP from 9 to 11. Removed KB929399 (read somewhere gave probs) no joy re- installed fix. Don't really want to get into opening up and checking cables & power supplies if possible due to unlikely event of both drives failing simultaneously. I can burn/read dvd data on both drives, read on both CD drives but not burn CD data. But still none the wiser. I don't know what else I can try...Anything I've missed? -- Regards p.mc "Ronaldo" wrote in message ... Fix is on Line 23. Allow or Disable CD Burn Options http://www.kellys-korner-xp.com/xp_tweaks.htm ---------------------------------- "Ronaldo" wrote in message ... If the Recording tab isn't available, find the registry fix here. http://www.kellys-korner-xp.com/xp_tweaks.htm ------------------ "p.mc" p@mc wrote in message ... Hi all winxp pro SP3 Loadsa ram dual core **2 X lite on dvdrw LH-20A 1H** I went to burn a cdr for audio cd using wmp9 and got an error message; "Windows Media Player cannot burn the files to the CD. Verify that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs." So I complied with that but to no avail. So i tried burning an audio cd within i-tunes, and that failed aswell as Nero. I tried my CD/R discs on another PC without a problem so next I installed WMP 11, but still the same. Then after more googling I installed aspi files and checked with an aspi checker and they were installed properly and no probs were reported, I also loaded the latest firmware for the 2 optical drives but still the same issue. Now my heads totally batterd and I can't seem to find an answer. I can't see it being an issue with the cdr's or the media programs so that just leaves me believing something on my system is corrupted, or settings may be wrong somewhere. Please somebody put me out of my misery. also I changed dma to pio then back and also tried burning at slower speeds and stopping uneeded services. -- Regards p.mc |
#13
|
|||
|
|||
cd burning issue
"Daave" wrote in message
... "p.mc" p@mc wrote in message ... I can burn/read dvd data on both drives, read on both CD drives but not burn CD data. Please clarify. These are both DVD drives, correct? (both are LH-20A1H, correct?) Correct You can burn data onto CDs using them both, correct? (Data is data.) If you mean on the fly (from one disc to another disc both cd & dvd formats) then yes. If you meant make an audio or data cd from the HDD to either of the optical drives, then no. It sounds like you cannot create an audio CD on either, correct? Have you tried creating a DVD (that is, a DVD that will play on a DVD player)? Have you checked Event Viewer for any error reports? Event viewer...Application The LowerFilter registery key for CD-ROM was containing incorrect drivers and was corrected. The old value was : GEARAspiWDM. The new value is : (empty) "After I un-installed I-Tunes" Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i. The description for Event ID ( 1073 ) in Source ( ASP.NET 1.1.4322.0 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To completely uninstall ASP.NET from IIS, please re-enable IIS and unregister ASP.NET using aspnet_regiis.exe /u. Event viewer...System The nVidia WDM Video Capture (universal) service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The General Purpose USB Driver (adildr.sys) service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The nVidia WDM A/V Crossbar service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The driver detected a controller error on \Device\CdRom0. The driver detected a controller error on \Device\CdRom5. The driver detected a controller error on \Device\Harddisk5\D. The driver detected a controller error on \Device\Harddisk4\D. The driver detected a controller error on \Device\Harddisk2\D. The device, \Device\CdRom0, has a bad block. The device, \Device\CdRom1, has a bad block. An error was detected on device \Device\CdRom1 during a paging operation. The IMAPI CD-Burning COM Service service was successfully sent a start control. These are the probs found this month !! I've never used WMP, so I can't help you there. How about using CDBurnerXP (a superior program IMO)? If you still have a problem, you can post in their forum: http://cdburnerxp.se/ Also, how large is your hard drive and how much free space does it have? 80gb with system and prog files on...43gb free 400gb storage...226gb free 500gb ext...126gb free Were you *ever* able to create audio CDs on this PC? What is the make and model? pcspecialist bespoke winxp pro sp3 intel core 2 duo E6700 (2x 2.66ghz) 2x 1gb corsair memory asus PP5N32-E SLI plus mobo geeforce 8800 gtx pci express soundblaster x-fi platinum fatal1ty |
#14
|
|||
|
|||
cd burning issue
Try this:
Right-click My Computer and select Manage. Click Device Manager. Does anything look suspicious in the right pane? p.mc wrote: "Daave" wrote in message ... "p.mc" p@mc wrote in message ... I can burn/read dvd data on both drives, read on both CD drives but not burn CD data. Please clarify. These are both DVD drives, correct? (both are LH-20A1H, correct?) Correct You can burn data onto CDs using them both, correct? (Data is data.) If you mean on the fly (from one disc to another disc both cd & dvd formats) then yes. If you meant make an audio or data cd from the HDD to either of the optical drives, then no. It sounds like you cannot create an audio CD on either, correct? Have you tried creating a DVD (that is, a DVD that will play on a DVD player)? Have you checked Event Viewer for any error reports? Event viewer...Application The LowerFilter registery key for CD-ROM was containing incorrect drivers and was corrected. The old value was : GEARAspiWDM. The new value is : (empty) "After I un-installed I-Tunes" Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i. The description for Event ID ( 1073 ) in Source ( ASP.NET 1.1.4322.0 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To completely uninstall ASP.NET from IIS, please re-enable IIS and unregister ASP.NET using aspnet_regiis.exe /u. Event viewer...System The nVidia WDM Video Capture (universal) service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The General Purpose USB Driver (adildr.sys) service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The nVidia WDM A/V Crossbar service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The driver detected a controller error on \Device\CdRom0. The driver detected a controller error on \Device\CdRom5. The driver detected a controller error on \Device\Harddisk5\D. The driver detected a controller error on \Device\Harddisk4\D. The driver detected a controller error on \Device\Harddisk2\D. The device, \Device\CdRom0, has a bad block. The device, \Device\CdRom1, has a bad block. An error was detected on device \Device\CdRom1 during a paging operation. The IMAPI CD-Burning COM Service service was successfully sent a start control. These are the probs found this month !! I've never used WMP, so I can't help you there. How about using CDBurnerXP (a superior program IMO)? If you still have a problem, you can post in their forum: http://cdburnerxp.se/ Also, how large is your hard drive and how much free space does it have? 80gb with system and prog files on...43gb free 400gb storage...226gb free 500gb ext...126gb free Were you *ever* able to create audio CDs on this PC? What is the make and model? pcspecialist bespoke winxp pro sp3 intel core 2 duo E6700 (2x 2.66ghz) 2x 1gb corsair memory asus PP5N32-E SLI plus mobo geeforce 8800 gtx pci express soundblaster x-fi platinum fatal1ty |
#15
|
|||
|
|||
cd burning issue
Device manager reports no problems, both driveds are enabled and reporting
no errors. I've just done a "sfc /scannow" but also no joy. -- Regards p.mc "Daave" wrote in message ... Try this: Right-click My Computer and select Manage. Click Device Manager. Does anything look suspicious in the right pane? p.mc wrote: "Daave" wrote in message ... "p.mc" p@mc wrote in message ... I can burn/read dvd data on both drives, read on both CD drives but not burn CD data. Please clarify. These are both DVD drives, correct? (both are LH-20A1H, correct?) Correct You can burn data onto CDs using them both, correct? (Data is data.) If you mean on the fly (from one disc to another disc both cd & dvd formats) then yes. If you meant make an audio or data cd from the HDD to either of the optical drives, then no. It sounds like you cannot create an audio CD on either, correct? Have you tried creating a DVD (that is, a DVD that will play on a DVD player)? Have you checked Event Viewer for any error reports? Event viewer...Application The LowerFilter registery key for CD-ROM was containing incorrect drivers and was corrected. The old value was : GEARAspiWDM. The new value is : (empty) "After I un-installed I-Tunes" Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i. The description for Event ID ( 1073 ) in Source ( ASP.NET 1.1.4322.0 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To completely uninstall ASP.NET from IIS, please re-enable IIS and unregister ASP.NET using aspnet_regiis.exe /u. Event viewer...System The nVidia WDM Video Capture (universal) service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The General Purpose USB Driver (adildr.sys) service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The nVidia WDM A/V Crossbar service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. The driver detected a controller error on \Device\CdRom0. The driver detected a controller error on \Device\CdRom5. The driver detected a controller error on \Device\Harddisk5\D. The driver detected a controller error on \Device\Harddisk4\D. The driver detected a controller error on \Device\Harddisk2\D. The device, \Device\CdRom0, has a bad block. The device, \Device\CdRom1, has a bad block. An error was detected on device \Device\CdRom1 during a paging operation. The IMAPI CD-Burning COM Service service was successfully sent a start control. These are the probs found this month !! I've never used WMP, so I can't help you there. How about using CDBurnerXP (a superior program IMO)? If you still have a problem, you can post in their forum: http://cdburnerxp.se/ Also, how large is your hard drive and how much free space does it have? 80gb with system and prog files on...43gb free 400gb storage...226gb free 500gb ext...126gb free Were you *ever* able to create audio CDs on this PC? What is the make and model? pcspecialist bespoke winxp pro sp3 intel core 2 duo E6700 (2x 2.66ghz) 2x 1gb corsair memory asus PP5N32-E SLI plus mobo geeforce 8800 gtx pci express soundblaster x-fi platinum fatal1ty |
Thread Tools | |
Display Modes | |
|
|