A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Customizing Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

USB Gamepad in DOS?



 
 
Thread Tools Display Modes
  #16  
Old July 29th 04, 12:19 AM
R. McCarty
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

While limited in scope, there are DOS drivers for DOS, Google
using USB Dos as keywords or a quick visit to
http://www.bootdisk.com/usb.htm


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.

Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to work

in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to work

in
any DOS set up.

Any ideas would be great. TIA. Colin D.








Ads
  #17  
Old July 29th 04, 12:19 AM
R. McCarty
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

While limited in scope, there are DOS drivers for DOS, Google
using USB Dos as keywords or a quick visit to
http://www.bootdisk.com/usb.htm


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.

Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to work

in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to work

in
any DOS set up.

Any ideas would be great. TIA. Colin D.








  #18  
Old July 29th 04, 12:27 AM
R. McCarty
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

While limited in scope, there are DOS drivers for DOS, Google
using USB Dos as keywords or a quick visit to
http://www.bootdisk.com/usb.htm


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.

Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to work

in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to work

in
any DOS set up.

Any ideas would be great. TIA. Colin D.








  #19  
Old July 29th 04, 12:36 AM
t.cruise
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

You are correct:

Q: This sounds like a huge change from today's Windows. Will my current applications still
work with Longhorn?
A: Yes. Microsoft has even pledged to retain DOS compatibility with Longhorn, though it's
currently unclear whether DOS support will be improved over what's available today in
Windows XP.

That doesn't mean that anyone will be writing drivers for USB hardware to function in the
DOS environment.
--

T.C.

Remove [NoSpam] to reply



"David Candy" wrote in message
...
Dos won't be removed from Longhorn. There are millions of companies that reley on Dos apps
known as Line Of Business apps. If longhorn dumps Dos then these companies won't buy it as
they would have to close down if they did.

One example is Market Research software. In the environment I'm most familar with it is a
Dos/Novell application. The Windows ports are crap and are designed for the non programmer
user. But a company using this software would, if Dos was excluded from Longhorn,
1/ Cease operations
2/ Not buy longhorn
3/ Retrain all programmers, analysts, data collection staff, statisticians, coders.
Hundreds of people. Most of a MR company (only HR and the researchers wouldn't need
training). And not collecting revenue while doing this. This is why Dos IS included in
Longhorn, Microsoft want people to buy it.

--
----------------------------------------------------------
'Not happy John! Defending our democracy',
http://www.smh.com.au/articles/2004/...392635123.html

"t.cruise" wrote in message
...
Well you probably won't be able to "talk people down to DOS" with the next major version
of Windows, because I suspect that even the DOS emulator will be gone when "Longhorn" is
released. My response in no way was meant to be taken personally. It's just that your
request was analogous to asking how to make a BetaMax Video Cassette work with a DVD
player. USB hardware components/drivers are years ahead of DOS technology. It's
difficult enough, if at all possible these days, to get Windows XP compatible drivers

for
some of the older Windows 98 USB peripherals, and you're asking for a driver that will
allow a USB hardware component to work with DOS programs.
--

T.C.

Remove [NoSpam] to reply


"Rowan Sheridan" wrote in message
...
Excuse me DOS has its uses, I work in a technical support department for a
company, I frequently talk users down to DOS so I can get them to execute
commands etc instead of saying,"can you double click on the little yellow
thing with a clamp on it....no can u double LEFT click."
Trust me this can get so bloody annoying. I'm not saying DOS is a better
operating system, just that it is not a totally ****ty OS and that it has
no uses

"t.cruise" wrote in message
...
DOS has been dead for years. When was the last time that a major

application was written
for DOS? Even Microsoft, who created DOS, finally abandoned it with

Windows XP, only
including a DOS emulator for those who refuse to give up on their almost

orphaned DOS
software. It wouldn't be "an opportunity for someone to fill." It would

be a waste of
time.
--

T.C.

Remove [NoSpam] to reply


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done

it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.
Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to

work
in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to

work
in
any DOS set up.

Any ideas would be great. TIA. Colin D.








---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004






---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004


  #20  
Old July 29th 04, 12:36 AM
t.cruise
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

You are correct:

Q: This sounds like a huge change from today's Windows. Will my current applications still
work with Longhorn?
A: Yes. Microsoft has even pledged to retain DOS compatibility with Longhorn, though it's
currently unclear whether DOS support will be improved over what's available today in
Windows XP.

That doesn't mean that anyone will be writing drivers for USB hardware to function in the
DOS environment.
--

T.C.

Remove [NoSpam] to reply



"David Candy" wrote in message
...
Dos won't be removed from Longhorn. There are millions of companies that reley on Dos apps
known as Line Of Business apps. If longhorn dumps Dos then these companies won't buy it as
they would have to close down if they did.

One example is Market Research software. In the environment I'm most familar with it is a
Dos/Novell application. The Windows ports are crap and are designed for the non programmer
user. But a company using this software would, if Dos was excluded from Longhorn,
1/ Cease operations
2/ Not buy longhorn
3/ Retrain all programmers, analysts, data collection staff, statisticians, coders.
Hundreds of people. Most of a MR company (only HR and the researchers wouldn't need
training). And not collecting revenue while doing this. This is why Dos IS included in
Longhorn, Microsoft want people to buy it.

--
----------------------------------------------------------
'Not happy John! Defending our democracy',
http://www.smh.com.au/articles/2004/...392635123.html

"t.cruise" wrote in message
...
Well you probably won't be able to "talk people down to DOS" with the next major version
of Windows, because I suspect that even the DOS emulator will be gone when "Longhorn" is
released. My response in no way was meant to be taken personally. It's just that your
request was analogous to asking how to make a BetaMax Video Cassette work with a DVD
player. USB hardware components/drivers are years ahead of DOS technology. It's
difficult enough, if at all possible these days, to get Windows XP compatible drivers

for
some of the older Windows 98 USB peripherals, and you're asking for a driver that will
allow a USB hardware component to work with DOS programs.
--

T.C.

Remove [NoSpam] to reply


"Rowan Sheridan" wrote in message
...
Excuse me DOS has its uses, I work in a technical support department for a
company, I frequently talk users down to DOS so I can get them to execute
commands etc instead of saying,"can you double click on the little yellow
thing with a clamp on it....no can u double LEFT click."
Trust me this can get so bloody annoying. I'm not saying DOS is a better
operating system, just that it is not a totally ****ty OS and that it has
no uses

"t.cruise" wrote in message
...
DOS has been dead for years. When was the last time that a major

application was written
for DOS? Even Microsoft, who created DOS, finally abandoned it with

Windows XP, only
including a DOS emulator for those who refuse to give up on their almost

orphaned DOS
software. It wouldn't be "an opportunity for someone to fill." It would

be a waste of
time.
--

T.C.

Remove [NoSpam] to reply


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done

it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.
Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to

work
in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to

work
in
any DOS set up.

Any ideas would be great. TIA. Colin D.








---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004






---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004


  #21  
Old July 29th 04, 12:36 AM
t.cruise
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

You are correct:

Q: This sounds like a huge change from today's Windows. Will my current applications still
work with Longhorn?
A: Yes. Microsoft has even pledged to retain DOS compatibility with Longhorn, though it's
currently unclear whether DOS support will be improved over what's available today in
Windows XP.

That doesn't mean that anyone will be writing drivers for USB hardware to function in the
DOS environment.
--

T.C.

Remove [NoSpam] to reply



"David Candy" wrote in message
...
Dos won't be removed from Longhorn. There are millions of companies that reley on Dos apps
known as Line Of Business apps. If longhorn dumps Dos then these companies won't buy it as
they would have to close down if they did.

One example is Market Research software. In the environment I'm most familar with it is a
Dos/Novell application. The Windows ports are crap and are designed for the non programmer
user. But a company using this software would, if Dos was excluded from Longhorn,
1/ Cease operations
2/ Not buy longhorn
3/ Retrain all programmers, analysts, data collection staff, statisticians, coders.
Hundreds of people. Most of a MR company (only HR and the researchers wouldn't need
training). And not collecting revenue while doing this. This is why Dos IS included in
Longhorn, Microsoft want people to buy it.

--
----------------------------------------------------------
'Not happy John! Defending our democracy',
http://www.smh.com.au/articles/2004/...392635123.html

"t.cruise" wrote in message
...
Well you probably won't be able to "talk people down to DOS" with the next major version
of Windows, because I suspect that even the DOS emulator will be gone when "Longhorn" is
released. My response in no way was meant to be taken personally. It's just that your
request was analogous to asking how to make a BetaMax Video Cassette work with a DVD
player. USB hardware components/drivers are years ahead of DOS technology. It's
difficult enough, if at all possible these days, to get Windows XP compatible drivers

for
some of the older Windows 98 USB peripherals, and you're asking for a driver that will
allow a USB hardware component to work with DOS programs.
--

T.C.

Remove [NoSpam] to reply


"Rowan Sheridan" wrote in message
...
Excuse me DOS has its uses, I work in a technical support department for a
company, I frequently talk users down to DOS so I can get them to execute
commands etc instead of saying,"can you double click on the little yellow
thing with a clamp on it....no can u double LEFT click."
Trust me this can get so bloody annoying. I'm not saying DOS is a better
operating system, just that it is not a totally ****ty OS and that it has
no uses

"t.cruise" wrote in message
...
DOS has been dead for years. When was the last time that a major

application was written
for DOS? Even Microsoft, who created DOS, finally abandoned it with

Windows XP, only
including a DOS emulator for those who refuse to give up on their almost

orphaned DOS
software. It wouldn't be "an opportunity for someone to fill." It would

be a waste of
time.
--

T.C.

Remove [NoSpam] to reply


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done

it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.
Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to

work
in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to

work
in
any DOS set up.

Any ideas would be great. TIA. Colin D.








---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004






---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004


  #22  
Old July 29th 04, 07:55 AM
R. McCarty
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

While limited in scope, there are DOS drivers for DOS, Google
using USB Dos as keywords or a quick visit to
http://www.bootdisk.com/usb.htm


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.

Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to work

in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to work

in
any DOS set up.

Any ideas would be great. TIA. Colin D.








  #23  
Old July 29th 04, 08:24 AM
t.cruise
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

You are correct:

Q: This sounds like a huge change from today's Windows. Will my current applications still
work with Longhorn?
A: Yes. Microsoft has even pledged to retain DOS compatibility with Longhorn, though it's
currently unclear whether DOS support will be improved over what's available today in
Windows XP.

That doesn't mean that anyone will be writing drivers for USB hardware to function in the
DOS environment.
--

T.C.

Remove [NoSpam] to reply



"David Candy" wrote in message
...
Dos won't be removed from Longhorn. There are millions of companies that reley on Dos apps
known as Line Of Business apps. If longhorn dumps Dos then these companies won't buy it as
they would have to close down if they did.

One example is Market Research software. In the environment I'm most familar with it is a
Dos/Novell application. The Windows ports are crap and are designed for the non programmer
user. But a company using this software would, if Dos was excluded from Longhorn,
1/ Cease operations
2/ Not buy longhorn
3/ Retrain all programmers, analysts, data collection staff, statisticians, coders.
Hundreds of people. Most of a MR company (only HR and the researchers wouldn't need
training). And not collecting revenue while doing this. This is why Dos IS included in
Longhorn, Microsoft want people to buy it.

--
----------------------------------------------------------
'Not happy John! Defending our democracy',
http://www.smh.com.au/articles/2004/...392635123.html

"t.cruise" wrote in message
...
Well you probably won't be able to "talk people down to DOS" with the next major version
of Windows, because I suspect that even the DOS emulator will be gone when "Longhorn" is
released. My response in no way was meant to be taken personally. It's just that your
request was analogous to asking how to make a BetaMax Video Cassette work with a DVD
player. USB hardware components/drivers are years ahead of DOS technology. It's
difficult enough, if at all possible these days, to get Windows XP compatible drivers

for
some of the older Windows 98 USB peripherals, and you're asking for a driver that will
allow a USB hardware component to work with DOS programs.
--

T.C.

Remove [NoSpam] to reply


"Rowan Sheridan" wrote in message
...
Excuse me DOS has its uses, I work in a technical support department for a
company, I frequently talk users down to DOS so I can get them to execute
commands etc instead of saying,"can you double click on the little yellow
thing with a clamp on it....no can u double LEFT click."
Trust me this can get so bloody annoying. I'm not saying DOS is a better
operating system, just that it is not a totally ****ty OS and that it has
no uses

"t.cruise" wrote in message
...
DOS has been dead for years. When was the last time that a major

application was written
for DOS? Even Microsoft, who created DOS, finally abandoned it with

Windows XP, only
including a DOS emulator for those who refuse to give up on their almost

orphaned DOS
software. It wouldn't be "an opportunity for someone to fill." It would

be a waste of
time.
--

T.C.

Remove [NoSpam] to reply


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done

it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.
Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to

work
in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to

work
in
any DOS set up.

Any ideas would be great. TIA. Colin D.








---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004






---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004


  #24  
Old July 29th 04, 10:22 AM
R. McCarty
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

While limited in scope, there are DOS drivers for DOS, Google
using USB Dos as keywords or a quick visit to
http://www.bootdisk.com/usb.htm


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.

Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to work

in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to work

in
any DOS set up.

Any ideas would be great. TIA. Colin D.








  #25  
Old July 29th 04, 10:42 AM
t.cruise
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

You are correct:

Q: This sounds like a huge change from today's Windows. Will my current applications still
work with Longhorn?
A: Yes. Microsoft has even pledged to retain DOS compatibility with Longhorn, though it's
currently unclear whether DOS support will be improved over what's available today in
Windows XP.

That doesn't mean that anyone will be writing drivers for USB hardware to function in the
DOS environment.
--

T.C.

Remove [NoSpam] to reply



"David Candy" wrote in message
...
Dos won't be removed from Longhorn. There are millions of companies that reley on Dos apps
known as Line Of Business apps. If longhorn dumps Dos then these companies won't buy it as
they would have to close down if they did.

One example is Market Research software. In the environment I'm most familar with it is a
Dos/Novell application. The Windows ports are crap and are designed for the non programmer
user. But a company using this software would, if Dos was excluded from Longhorn,
1/ Cease operations
2/ Not buy longhorn
3/ Retrain all programmers, analysts, data collection staff, statisticians, coders.
Hundreds of people. Most of a MR company (only HR and the researchers wouldn't need
training). And not collecting revenue while doing this. This is why Dos IS included in
Longhorn, Microsoft want people to buy it.

--
----------------------------------------------------------
'Not happy John! Defending our democracy',
http://www.smh.com.au/articles/2004/...392635123.html

"t.cruise" wrote in message
...
Well you probably won't be able to "talk people down to DOS" with the next major version
of Windows, because I suspect that even the DOS emulator will be gone when "Longhorn" is
released. My response in no way was meant to be taken personally. It's just that your
request was analogous to asking how to make a BetaMax Video Cassette work with a DVD
player. USB hardware components/drivers are years ahead of DOS technology. It's
difficult enough, if at all possible these days, to get Windows XP compatible drivers

for
some of the older Windows 98 USB peripherals, and you're asking for a driver that will
allow a USB hardware component to work with DOS programs.
--

T.C.

Remove [NoSpam] to reply


"Rowan Sheridan" wrote in message
...
Excuse me DOS has its uses, I work in a technical support department for a
company, I frequently talk users down to DOS so I can get them to execute
commands etc instead of saying,"can you double click on the little yellow
thing with a clamp on it....no can u double LEFT click."
Trust me this can get so bloody annoying. I'm not saying DOS is a better
operating system, just that it is not a totally ****ty OS and that it has
no uses

"t.cruise" wrote in message
...
DOS has been dead for years. When was the last time that a major

application was written
for DOS? Even Microsoft, who created DOS, finally abandoned it with

Windows XP, only
including a DOS emulator for those who refuse to give up on their almost

orphaned DOS
software. It wouldn't be "an opportunity for someone to fill." It would

be a waste of
time.
--

T.C.

Remove [NoSpam] to reply


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done

it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.
Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to

work
in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to

work
in
any DOS set up.

Any ideas would be great. TIA. Colin D.








---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004






---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004


  #26  
Old July 29th 04, 06:51 PM
R. McCarty
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

While limited in scope, there are DOS drivers for DOS, Google
using USB Dos as keywords or a quick visit to
http://www.bootdisk.com/usb.htm


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.

Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to work

in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to work

in
any DOS set up.

Any ideas would be great. TIA. Colin D.








  #27  
Old July 29th 04, 06:55 PM
t.cruise
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

You are correct:

Q: This sounds like a huge change from today's Windows. Will my current applications still
work with Longhorn?
A: Yes. Microsoft has even pledged to retain DOS compatibility with Longhorn, though it's
currently unclear whether DOS support will be improved over what's available today in
Windows XP.

That doesn't mean that anyone will be writing drivers for USB hardware to function in the
DOS environment.
--

T.C.

Remove [NoSpam] to reply



"David Candy" wrote in message
...
Dos won't be removed from Longhorn. There are millions of companies that reley on Dos apps
known as Line Of Business apps. If longhorn dumps Dos then these companies won't buy it as
they would have to close down if they did.

One example is Market Research software. In the environment I'm most familar with it is a
Dos/Novell application. The Windows ports are crap and are designed for the non programmer
user. But a company using this software would, if Dos was excluded from Longhorn,
1/ Cease operations
2/ Not buy longhorn
3/ Retrain all programmers, analysts, data collection staff, statisticians, coders.
Hundreds of people. Most of a MR company (only HR and the researchers wouldn't need
training). And not collecting revenue while doing this. This is why Dos IS included in
Longhorn, Microsoft want people to buy it.

--
----------------------------------------------------------
'Not happy John! Defending our democracy',
http://www.smh.com.au/articles/2004/...392635123.html

"t.cruise" wrote in message
...
Well you probably won't be able to "talk people down to DOS" with the next major version
of Windows, because I suspect that even the DOS emulator will be gone when "Longhorn" is
released. My response in no way was meant to be taken personally. It's just that your
request was analogous to asking how to make a BetaMax Video Cassette work with a DVD
player. USB hardware components/drivers are years ahead of DOS technology. It's
difficult enough, if at all possible these days, to get Windows XP compatible drivers

for
some of the older Windows 98 USB peripherals, and you're asking for a driver that will
allow a USB hardware component to work with DOS programs.
--

T.C.

Remove [NoSpam] to reply


"Rowan Sheridan" wrote in message
...
Excuse me DOS has its uses, I work in a technical support department for a
company, I frequently talk users down to DOS so I can get them to execute
commands etc instead of saying,"can you double click on the little yellow
thing with a clamp on it....no can u double LEFT click."
Trust me this can get so bloody annoying. I'm not saying DOS is a better
operating system, just that it is not a totally ****ty OS and that it has
no uses

"t.cruise" wrote in message
...
DOS has been dead for years. When was the last time that a major

application was written
for DOS? Even Microsoft, who created DOS, finally abandoned it with

Windows XP, only
including a DOS emulator for those who refuse to give up on their almost

orphaned DOS
software. It wouldn't be "an opportunity for someone to fill." It would

be a waste of
time.
--

T.C.

Remove [NoSpam] to reply


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done

it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.
Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to

work
in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to

work
in
any DOS set up.

Any ideas would be great. TIA. Colin D.








---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004






---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004


  #28  
Old July 29th 04, 09:35 PM
R. McCarty
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

While limited in scope, there are DOS drivers for DOS, Google
using USB Dos as keywords or a quick visit to
http://www.bootdisk.com/usb.htm


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.

Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to work

in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to work

in
any DOS set up.

Any ideas would be great. TIA. Colin D.








  #29  
Old July 29th 04, 09:39 PM
t.cruise
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

You are correct:

Q: This sounds like a huge change from today's Windows. Will my current applications still
work with Longhorn?
A: Yes. Microsoft has even pledged to retain DOS compatibility with Longhorn, though it's
currently unclear whether DOS support will be improved over what's available today in
Windows XP.

That doesn't mean that anyone will be writing drivers for USB hardware to function in the
DOS environment.
--

T.C.

Remove [NoSpam] to reply



"David Candy" wrote in message
...
Dos won't be removed from Longhorn. There are millions of companies that reley on Dos apps
known as Line Of Business apps. If longhorn dumps Dos then these companies won't buy it as
they would have to close down if they did.

One example is Market Research software. In the environment I'm most familar with it is a
Dos/Novell application. The Windows ports are crap and are designed for the non programmer
user. But a company using this software would, if Dos was excluded from Longhorn,
1/ Cease operations
2/ Not buy longhorn
3/ Retrain all programmers, analysts, data collection staff, statisticians, coders.
Hundreds of people. Most of a MR company (only HR and the researchers wouldn't need
training). And not collecting revenue while doing this. This is why Dos IS included in
Longhorn, Microsoft want people to buy it.

--
----------------------------------------------------------
'Not happy John! Defending our democracy',
http://www.smh.com.au/articles/2004/...392635123.html

"t.cruise" wrote in message
...
Well you probably won't be able to "talk people down to DOS" with the next major version
of Windows, because I suspect that even the DOS emulator will be gone when "Longhorn" is
released. My response in no way was meant to be taken personally. It's just that your
request was analogous to asking how to make a BetaMax Video Cassette work with a DVD
player. USB hardware components/drivers are years ahead of DOS technology. It's
difficult enough, if at all possible these days, to get Windows XP compatible drivers

for
some of the older Windows 98 USB peripherals, and you're asking for a driver that will
allow a USB hardware component to work with DOS programs.
--

T.C.

Remove [NoSpam] to reply


"Rowan Sheridan" wrote in message
...
Excuse me DOS has its uses, I work in a technical support department for a
company, I frequently talk users down to DOS so I can get them to execute
commands etc instead of saying,"can you double click on the little yellow
thing with a clamp on it....no can u double LEFT click."
Trust me this can get so bloody annoying. I'm not saying DOS is a better
operating system, just that it is not a totally ****ty OS and that it has
no uses

"t.cruise" wrote in message
...
DOS has been dead for years. When was the last time that a major

application was written
for DOS? Even Microsoft, who created DOS, finally abandoned it with

Windows XP, only
including a DOS emulator for those who refuse to give up on their almost

orphaned DOS
software. It wouldn't be "an opportunity for someone to fill." It would

be a waste of
time.
--

T.C.

Remove [NoSpam] to reply


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done

it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.
Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to

work
in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to

work
in
any DOS set up.

Any ideas would be great. TIA. Colin D.








---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004






---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.725 / Virus Database: 480 - Release Date: 7/19/2004


  #30  
Old July 30th 04, 12:56 AM
R. McCarty
external usenet poster
 
Posts: n/a
Default USB Gamepad in DOS?

While limited in scope, there are DOS drivers for DOS, Google
using USB Dos as keywords or a quick visit to
http://www.bootdisk.com/usb.htm


"Sapper" wrote in message
...
Well that seems to open an opportunity for someone to fill, any takers?
Not being funny or anything, but it does seem odd that no one has done it
yet.
I assume that includes DOSBOX? Which I am about ot try.

"Glen" wrote in message
...
There aren't any drivers for usb devices in DOS as far as I know.

Therefore
no USB device can work in DOS.

Glen


"Sapper" wrote in message
...
O.K. I have some old programs, ROTT being one, which I can get to work

in
a
DOPS environment, but cannot get my basic MS Sindwinder gamepad to work

in
any DOS set up.

Any ideas would be great. TIA. Colin D.








 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 05:58 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.