Win XP Home and NIC Allied Telesyn AT-2500TX

I've changed the nic on my pc with an AT-2500TX.
The OS dont discover the new hardware and i cant add the driver.
Nicola

Hello

Well do you have the correct drivers on floppy disk or
maybe a cdrom, that support your OS, find that out first
ok, or try going to the manufacturer of that product website
and trying to locate the correct drivers for it.


Alvin


Nicola Bucci wrote:

I've changed the nic on my pc with an AT-2500TX.
The OS dont discover the new hardware and i cant add the driver.
Nicola

Thank you Alvin,
I've installed the same nic on a pc with XP Pro. When the os start it
discover and install correctly the new nic.
With XP Home the Os dont discover new HW.
Nicola

"Alvin A Brown" ha scritto nel messaggio
...
Hello

Well do you have the correct drivers on floppy disk or
maybe a cdrom, that support your OS, find that out first
ok, or try going to the manufacturer of that product website
and trying to locate the correct drivers for it.


Alvin


Nicola Bucci wrote:

I've changed the nic on my pc with an AT-2500TX.
The OS dont discover the new hardware and i cant add the driver.
Nicola

Hello

Well my question is if you install the card in an XP home pc
and use the drivers from your cdrom or floppy does it work

Alvin


Nicola Bucci wrote:

Thank you Alvin,
I've installed the same nic on a pc with XP Pro. When the os start it
discover and install correctly the new nic.
With XP Home the Os dont discover new HW.
Nicola

"Alvin A Brown" ha scritto nel messaggio
...
Hello

Well do you have the correct drivers on floppy disk or
maybe a cdrom, that support your OS, find that out first
ok, or try going to the manufacturer of that product website
and trying to locate the correct drivers for it.


Alvin


Nicola Bucci wrote:

I've changed the nic on my pc with an AT-2500TX.
The OS dont discover the new hardware and i cant add the driver.
Nicola

I cant install,
I've not the possibility to install a new driver. XP dont found new hw.
I've tryed to install an oem driver, but XP dont add a nic in the HW
listing.
Nicola

"Alvin A Brown" ha scritto nel messaggio
...
Hello

Well my question is if you install the card in an XP home pc
and use the drivers from your cdrom or floppy does it work

Alvin


Nicola Bucci wrote:

Thank you Alvin,
I've installed the same nic on a pc with XP Pro. When the os start it
discover and install correctly the new nic.
With XP Home the Os dont discover new HW.
Nicola

"Alvin A Brown" ha scritto nel messaggio
...
Hello

Well do you have the correct drivers on floppy disk or
maybe a cdrom, that support your OS, find that out first
ok, or try going to the manufacturer of that product website
and trying to locate the correct drivers for it.


Alvin


Nicola Bucci wrote:

I've changed the nic on my pc with an AT-2500TX.
The OS dont discover the new hardware and i cant add the driver.
Nicola

Hi Nicola

When you have the AT-2500 in the computer, which network adapter shows in
the device manager?

If the one you have replaced is still showing then "remove" it from the
device manager and restart the computer.

If you have the Allied Telesyn installation disk there is an installation
programme on the CD which may be of use instead of the Windows Hardware
wizard. The Allied Telesyn website also has the manual and drivers you need
with details of the procedures required for removing and installing or
updating a network driver.

http://www.alliedtelesyn.com/product/2500TX

Hope that helps
Pete
-------------------------


"Nicola Bucci" wrote in message
...
I've changed the nic on my pc with an AT-2500TX.
The OS dont discover the new hardware and i cant add the driver.
Nicola

Hello Pete, thank you.
In device manager i've not any network adatper and i've not any unknow
device :-(
When XP start i dont see the window "new hardware detect..."
I will see on the Allied Telesyn website.

Nicola


"Pete Baker" petebkrAThotmailDOTcom ha scritto nel messaggio
...
Hi Nicola

When you have the AT-2500 in the computer, which network adapter shows in
the device manager?

If the one you have replaced is still showing then "remove" it from the
device manager and restart the computer.

If you have the Allied Telesyn installation disk there is an installation
programme on the CD which may be of use instead of the Windows Hardware
wizard. The Allied Telesyn website also has the manual and drivers you
need
with details of the procedures required for removing and installing or
updating a network driver.

http://www.alliedtelesyn.com/product/2500TX

Hope that helps
Pete
-------------------------


"Nicola Bucci" wrote in message
...
I've changed the nic on my pc with an AT-2500TX.
The OS dont discover the new hardware and i cant add the driver.
Nicola

Nicola,

You have to take ol' Al's responses with a grain of salt. He doesn't
understand
that the system isn't detecting a plug and play nic. Wake up, Al!

With the computer off try to unplug and plug the nic in again. Sometimes
they don't seat properly. Be sure to plug the network cable in again, too.
If that doesn't work then if you have another blank pci slot then try that
other slot.

Also, could it be that the drivers for the old nic are compatible with the
new nic so that it would seem to be already installed? Check in device
manager to see if there is a network adapter listed.

If could be listed as the old or new nic and using the same drivers.

Regards.....

Sals

I have heard many people say that there is nothing worse than someone
who doesn't know what he/she is doing. There IS something worse. That is
someone who THINKS that he/she knows what he/she is doing, but really
doesn't!

"Nicola Bucci" wrote in message
...
I cant install,
I've not the possibility to install a new driver. XP dont found new hw.
I've tryed to install an oem driver, but XP dont add a nic in the HW
listing.
Nicola

"Alvin A Brown" ha scritto nel messaggio
...
Hello

Well my question is if you install the card in an XP home pc
and use the drivers from your cdrom or floppy does it work

Alvin


Nicola Bucci wrote:

Thank you Alvin,
I've installed the same nic on a pc with XP Pro. When the os start it
discover and install correctly the new nic.
With XP Home the Os dont discover new HW.
Nicola

"Alvin A Brown" ha scritto nel messaggio
...
Hello

Well do you have the correct drivers on floppy disk or
maybe a cdrom, that support your OS, find that out first
ok, or try going to the manufacturer of that product website
and trying to locate the correct drivers for it.


Alvin


Nicola Bucci wrote:

I've changed the nic on my pc with an AT-2500TX.
The OS dont discover the new hardware and i cant add the driver.
Nicola






---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.484 / Virus Database: 282 - Release Date: 05/27/2003