A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » New Users to Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

scan for file corruption



 
 
Thread Tools Display Modes
  #1  
Old January 25th 05, 06:33 PM
ms. greenhorn
external usenet poster
 
Posts: n/a
Default scan for file corruption

tried to find corrupted file by selecting "run" and entering "sfc/scannow"
w/no luck; repsonse was could not be found, to re-check the file name.
trying to repair corrupted file (per ms help desk) without re-installing os.
oh, and thanks for your suggestion, rick, but here i am, again.
Ads
  #2  
Old January 25th 05, 06:42 PM
Carey Frisch [MVP]
external usenet poster
 
Posts: n/a
Default scan for file corruption

1. Go to Start Run and type: CMD , and hit enter.
2. In the Command Prompt window type: SFC /SCANNOW
and hit enter. Have your Windows XP CD available.

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/secu...t/default.aspx

----------------------------------------------------------------------------

"ms. greenhorn" wrote:

| tried to find corrupted file by selecting "run" and entering "sfc/scannow"
| w/no luck; repsonse was could not be found, to re-check the file name.
| trying to repair corrupted file (per ms help desk) without re-installing os.
| oh, and thanks for your suggestion, rick, but here i am, again.
  #3  
Old January 25th 05, 07:01 PM
Byte
external usenet poster
 
Posts: n/a
Default scan for file corruption

If I may add, there is a space between SFC and the /
The original post does not show that.

"Carey Frisch [MVP]" wrote:

1. Go to Start Run and type: CMD , and hit enter.
2. In the Command Prompt window type: SFC /SCANNOW
and hit enter. Have your Windows XP CD available.

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/secu...t/default.aspx

----------------------------------------------------------------------------

"ms. greenhorn" wrote:

| tried to find corrupted file by selecting "run" and entering "sfc/scannow"
| w/no luck; repsonse was could not be found, to re-check the file name.
| trying to repair corrupted file (per ms help desk) without re-installing os.
| oh, and thanks for your suggestion, rick, but here i am, again.

  #4  
Old January 25th 05, 07:49 PM
ms. greenhorn
external usenet poster
 
Posts: n/a
Default scan for file corruption

to carey and byte - thanks for the details; cmd was not included in original
response under "blue screen error" post; also no reference to space after
sfc; oh and is sfc in caps or lc?

"Byte" wrote:

If I may add, there is a space between SFC and the /
The original post does not show that.

"Carey Frisch [MVP]" wrote:

1. Go to Start Run and type: CMD , and hit enter.
2. In the Command Prompt window type: SFC /SCANNOW
and hit enter. Have your Windows XP CD available.

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/secu...t/default.aspx

----------------------------------------------------------------------------

"ms. greenhorn" wrote:

| tried to find corrupted file by selecting "run" and entering "sfc/scannow"
| w/no luck; repsonse was could not be found, to re-check the file name.
| trying to repair corrupted file (per ms help desk) without re-installing os.
| oh, and thanks for your suggestion, rick, but here i am, again.

  #5  
Old January 25th 05, 09:01 PM
JAMI
external usenet poster
 
Posts: n/a
Default scan for file corruption

It should not matter whether you type it lower our uppercase as long as you
have the space before the switch

"ms. greenhorn" wrote:

to carey and byte - thanks for the details; cmd was not included in original
response under "blue screen error" post; also no reference to space after
sfc; oh and is sfc in caps or lc?

"Byte" wrote:

If I may add, there is a space between SFC and the /
The original post does not show that.

"Carey Frisch [MVP]" wrote:

1. Go to Start Run and type: CMD , and hit enter.
2. In the Command Prompt window type: SFC /SCANNOW
and hit enter. Have your Windows XP CD available.

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/secu...t/default.aspx

----------------------------------------------------------------------------

"ms. greenhorn" wrote:

| tried to find corrupted file by selecting "run" and entering "sfc/scannow"
| w/no luck; repsonse was could not be found, to re-check the file name.
| trying to repair corrupted file (per ms help desk) without re-installing os.
| oh, and thanks for your suggestion, rick, but here i am, again.

  #6  
Old February 3rd 05, 02:19 PM
Venom
external usenet poster
 
Posts: n/a
Default scan for file corruption







Introduction to using scannow sfc (system file checker)



Windows XP has the ability to protect itself from system instability caused by
3rd party software overwriting important system files. This used to be
(and still is in fact), a problem with Windows 95 and Windows 98.

With the introduction of Windows Millennium Edition, Microsoft made a real
effort to
stop this from happening. Now in Windows XP we have a much more refined
protection of these important files.... This system is called:

Windows File Protection

By default, Windows File Protection is always enabled and allows Windows
digitally signed files to replace existing files safely. Currently, signed
files are distributed
through:

# Windows Service Packs
# Hotfix distributions
# Operating system upgrades
# Windows Update
# Windows Device Manager

If you introduce a file replacement in any other way, Windows File protection
will overwrite your file!

An important part of Windows File Protection is the command line utility:

System File Checker (sfc.exe)

You will often see references to scannow sfc in online newsgroups etc. This
is a
great tool for troubleshooting Windows XP problems.



How to use scannow sfc...

The main reason for using this utility is when you suspect there may be a
problem with a Windows XP system file.

Perhaps you get a dialog box appear informing you of a problem with a .dll
file, or your program will just not load! It is therefore worth checking to
see if there are any corrupt system files using scannow sfc.

To do this simply go to the Run box on the Start Menu and type in:

sfc /scannow

This command will immediately initiate the Windows File Protection service
to scan all protected files and verify their integrity, replacing any files
with which it finds a problem.

The following should appear to give an indication of how long the process is
taking.







In an ideal world that would be the end of the story... Any corrupt, missing
or incorrect files would be replaced by this process.

However, things can go wrong and the following guide should help!

The #1 complaint with scannow sfc is the following dialog box appearing:




Why does this happen?

Well, in your computer's registry, are several settings that are checked
when you run scannow sfc.

As mentioned earlier in this article, the Windows File Protection service
constantly monitors for any changes to the main system files. Well Windows XP
keeps a cache (copy) of these essential files at the following location:

C:WINDOWS\System32\Dllcache (assuming C: is your system root which it
probably is.)

NB - The dllcache folder is extremely important so Windows XP hides it from
you! To view it go to: My Computer Tools Folder Options View
"uncheck" Hide protected operating system files.

If that's the case on your computer then there is normally no need for the
original XP CD to be inserted as your computer has a "copy" it can get hold
of in this cache...

But, if the Dllcache folder, or part of it, has become corrupted for some
reason then you will be prompted for the XP CD - so your computer can get a
clean copy!

Having said that not ALL installations of Windows XP have ALL the system
files cached into this folder! You may only have around 50MB of files in this
folder under Windows XP depending on the quota settings in the registry.
(Under Windows 2003 Server the default is 300MB of system files!)

Annoying, YES!

Is there a workaround YES!

As well as having a cache of all the system files on your PC, I like to have
the I386 folder from the XP CD installed on the computer as well. After doing
this I then modify the registry to tell it the source path for these files...
Why? Well not only does this prevent 99% of request for the the XP CD with
Windows File Protection. But the I386 folder also contains many other files
that are sometimes needed by the operating system and this stops those
requests for the XP CD too!

NB - With today's large hard drives you are not going to notice this 475 MB
folder on your computer, but older systems may not have the space for this...

Step 1

You will need to get your XP CD and locate the folder called:

I386

This is a major folder and should be one of the first you see, now copy this
onto your hard drive into the system root. For most of you that is going to
be C:\ so you should end up with a folder that looks like:
C:\WINDOWS\DLLCACHE

-----------------------------

Step 2

Now you will need to tell your computer you now have the files on your PC.
We do this is the registry (type regedit in the Run box on the start menu) by
navigating to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Setup

You will see various entries here on the right hand side. The one we want is
called:

SourcePath

It probably has an entry pointing to your CD-ROM drive, and that is why it
is asking for the XP CD. All we need to do is change it to:

C:\

Simply double click the SourcePatch setting and a new box will pop up
allowing you to make the change.

Now restart your computer and try scannow sfc again!

------------------------------

Other Problems with scannow sfc...

#1

Has the CD Drive's drive letter changed (perhaps by the addition of another
hard drive, partition, or removable drive) since Windows XP was first
installed? If so, simply edit the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Setup\SourcePath
to reflect the changed drive letter.

After you restart the computer, WFP and sfc /scannow uses the new source
path instead of prompting for the Windows XP installation CD-ROM

#2

Has the registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Setup\SourcePath
got an incorrect entry? The SourcePath entry does NOT include the path
location till the I386 folder. It completes one folder ahead to reach the
I386 folder.

Example:

If the I386 directory is at C:\I386, the SourcePath value would be C:\

#3

If the problem persists and you have the correct path for your I386 folder
then the I386 folder is corrupted. To solve this problem copy I386 folder
from the CD-ROM to your system restart the system and then
perform sfc /scannow again.

#4

You do not have an XP retail CD with an I386 folder on it. If you have a
restore CD from your PC manufacturer then you may have to explore the CD to
find the folder.

#5

You still keep being prompted for the XP CD yet you have done all in this
article! There is another setting in the registry that may be causing the
problem. Navigate to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SourcePath

Make sure the entry here is the same path to the I386 folder as used above.

#6

Systems administrators can enforce security policies that may include
changes to the Windows File Protection settings. You will need to speak with
your network administrator about this, but it is important to bear in mind
when Windows starts up, the Windows File Protection service synchronizes
(copies) the WFP settings from the following registry key:

HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Win dows NT\Windows File
Protection

to the following registry key:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

Therefore, if any of the following values are present in the
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Win dows NT\Windows File
Protection key, they will take precedence over the same values under the
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon key.

This will not effect scannow sfc so much, but WILL make an impact if any of
the other sfc.exe "switches" have been used! (More about these at the end of
this article.)

#7

When you run scannow at logon you do not get a progress bar... This can
easily be remedied by adding a new DWORD: SFCShowProgress to the registry
key:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

the values available a 0 = disabled, 1 = enabled

------------------------------------



What about Windows Updates.....

You may be asking yourself how does sfc.exe know how to check for updated
Windows system files? Well during OS upgrades, service pack installations
etc.. the dllcache folder should be updated with these new files.

As an example the recent Windows XP Hotfix - KB828035 updated the system
file wkssvc.dll A new version of the file was placed in C:\WINDOWS\system32
and a copy in the cache: C:\WINDOWS\system32\dllcache A copy of the old
system file is archived in: C:\WINDOWS\$NtUninstallKB828035$

There is another location the Windows File protection service uses and that
is the I386 folder in C:\WINDOWS\ServicePackFiles When you install a service
pack, like SP1. Any new system drivers are cached in this location too.

If you have odd problems with running scannow sfc and nothing else in the
article has resolved it, then take a look at the entry in:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Setup
\ServicePackSourcePath

This should be pointing to the location C:\WINDOWS\ServicePackFiles
(assuming C:\ is the boot drive.)


---------------------------------------------------------

For those of you who are familiar with sfc.exe under Windows 2000
professional. It is worth noting that the following two options are NOT
available under Windows XP.

These a

sfc /cancel - In Windows 2000, this command immediately cancels all pending
scans of protected system files. This option has no effect in Windows XP.

sfc /quiet - In Windows 2000 this sets Windows File Protection to replace
any incorrect system files detected with the appropriate version from the dll
cache without any user notification. This option has no effect in Windows XP.

Thanks for reading this article
on scannow sfc.



Introduction to windows file protection...

The Windows File Protection "concept" was first introduced by Microsoft into
the Windows Millennium operating system, as a way of stabilising the
software. In Windows XP we have a much better version of this service and
this article has been written to inform the reader of it's benefits.

For those of you who remember using Windows 95 and 98 computers, a frequent
problem was the operating system become erratic or just completely freezing
for no apparent reason.

Wel, the often underlying cause of these woes was the unprotected system
files being overwritten, corrupted or even deleted!

This led to most of the support issues and was often referred to as "DLL
HELL" because things could get so bad...

Now with the Windows File Protection service in place technical support is
much easier!

What is windows file protection...

The windows file protection service is an "invisible" service that is
enabled by default and runs constantly in the background after a successful
logon. (It does not load in safe mode.)

ALL SYS, DLL, EXE, and OCX files that ship on the Windows XP CD are
protected. True Type fonts--Micross.ttf, Tahoma.ttf, and Tahomabd.ttf - are
also protected. They are all "backed up" to a special folder called dllcache.
The location of this file is:

%SYSTEMROOT%\system32\dllcache

The dllcache folder is extremely important so Windows XP hides it from you!
To view it go to: My Computer Tools Folder Options View "uncheck"
Hide protected operating system files. This will also reveal other hidden
system files so be careful! e.g. pagefile.sys

Windows File Protection works by detecting the replacement/overwriting of
these system files. It then scans the file in question against several
catalogue files it has access to (nt5.cat, nt5inf.cat etc...). Should the
file not be the correct digitally signed version it is expecting, Windows
File Protection will then replace it with the cached version stored in the
%SYSTEMROOT%\system32\dllcache folder, or in cases where no cached version
exists you may be prompted for the Windows XP CD in order to restore the file
with a supported version.

To test this go to the dllcache folder yourself (probably
C:\WINDOWS\system32\dllcache on your computer) and rename the file
acctres.dll to acctress.dll

Close the explorer window and reopen at the same location. You will now see
the windows file protection service has replaced the file acctres.dll (now
delete acctress.dll)

This action is recorded in the system Log (via Event Viewer):
-----------------------------------------------------------------------------------------------------------------
Event Type: Information
Event Source: Windows File Protection
Event Category: None
Event ID: 64002
Date: 28/12/2003
Time: 15:37:42
User: N/A
Computer: MARCXP
Description:
File replacement was attempted on the protected system file acctres.dll.
This file was restored to the original version to maintain system stability.
The file version of the system file is 6.0.2600.0.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
---------------------------------------------------------------------------------------------------------------

Is Windows File Protection a good thing...

YES it IS!

It exists to protect the Windows system files from being modified, whether
accidentally or otherwise. As a network administrator I am VERY pleased with
this feature – no more running around fixing machines due to someone
installing/deleting something they shouldn’t have. You’d be surprised what
people are told to delete in these email virus hoaxes that are being sent
around. Another important reason for having this service running is
Trojan/viruses that try to overwrite system files to then pass on information
on your machine. If this happens windows file protection will kick in!

For software vendors writing software for Windows XP, they can no longer
replace files on your PC as part of the install process. Part of the
certification process to get the XP logo for their software products means
vendors now have to follow strict rules about how software is installed. This
is a GOOD thing!

What about when system files are updated by Microsoft...


If Windows File Protection protects system files then how exactly can they
be updated with newer versions?

Well Microsoft has made the following methods Windows File Protection
"aware" Meaning the newer files will replace the old system files and a copy
of the new file will be stored in the dllcache folder. The security
catalogues are also updated so the Windows File Protection service always
knows what version of the digitally signed file is current!

Replacement of protected system files is supported using the following
mechanisms:

• Windows Service Pack installation (UPDATE.EXE) e.g. XP SP1a

• Hotfix distributions installed using (HOTFIX.EXE) e.g. KB825035

• Operating system upgrade (WINNT32.EXE)

• Windows Update Website

• Windows Device Installer



Can I turn off Windows File Protection...

The official answer form Microsoft is NO and this is be design. (The only
exception is if you are using a kernel debugger.)

However, there is a way to do it, BUT I can think of no reason for you to do
so!!!

On a close inspection of the system file sfc.dll it is possible to see a
reference, in part of the code, that checks the value of the SFCDisable in
the WinLogon key... (Something we talk about in a moment!)

This key is: 0ffffff9dh

This is NOT a documented feature from Microsoft and should NOT be used
unless you REALLY are sure you need to disable the service!

(NB - It is interesting to note that the virus "W32/CodeRed.D", that caused
so much mayhem by shutting down Internet Servers in the summer of 2002, used
this very same undocumented setting to stop the Windows File protection
service from running. The virus could then release its Trojan payload to do
damage and replicate itself around the Internet!

The registry key to change is:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows
NT\CurrentVersion\Winlogon\SFCDisable

By default, SFCDisable is set to 0, which means Windows File Protection is
active.

Setting SFCDisable to 1 will disable Windows File Protection . Setting
SFCDisable to 2 will disable Windows File Protection for the next system
restart only (without a prompt to re-enable).

Important: You must have a kernel debugger attached to the system via null
modem cable to use SFCDisable = 1 or SFCDisable = 2.

After Windows File Protection is disabled using the SFCDisable = 1 setting,
the following message will appear after logon:

Warning! Windows File Protection is not active on this system. Would you
like to enable Windows File Protection now? This will enable Windows File
Protection until the next system restart. Yes No.

Clicking Yes will reactivate Windows File Protection until the next system
restart. This message will appear at every successful logon until SFCDisable
is set to 0.

NOTE: The above message will only be presented to Administrators.

To verify that Windows File Protection has been disabled after rebooting
click on Start menu Control Panel Administrative Tools Event Viewer.

An event will be logged to indicate Windows File Protection is disabled on
the PC. If this event hasn’t been logged in Event Viewer then the service has
NOT been disabled...



Customizing Windows File Protection...


The Windows File Protection service can be customized in several ways with
the simplest way of modifying the options being through the Group Policy
Editor.

Click on Start Menu Run box type in gpedit.msc and hit the Ok button.

Expand Computer Configuration Administrative Templates System

then select the Windows File Protection folder...

ANY changes made here will update the registry keys at:

HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Win dows NT\Windows File
Protection

Administrators PLEASE note:

When Windows XP starts up, the Windows File Protection service synchronizes
(copies) the Windows File Protection settings from the following registry key:

HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Win dows NT\Windows File
Protection

to the following registry key:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

Therefore, if any of the following values are present in the
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Win dows NT\Windows File
Protection key, they will take precedence over the same values under the
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon key.


Other edits include:

All registry settings for this service are located in:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

By default, only Administrators and System will be able to modify these
settings.


SFCScan (REG_DWORD)
0 = do not scan protected files at boot (default).
1 = scan protected files at every boot.
2 = scan protected files once.

SFCQuota (REG_DWORD)
n = size (in megabytes) of dllcache quota.
FFFFFFFF = all files.

If you don't know hex, here's some samples:

00000099 = 153 (MB).
0000004b = 75 (MB).
00000032 = 50 (MB).
0000000a = 10 (MB).

SFCShowProgress (REG_DWORD)
0 = System File Checker progress meter is not displayed.
1 = System File Checker progress meter is displayed (default).

SFCDllCacheDir (REG_EXPAND_SZ)
Path = local location of dllcache directory (default is
%Systemroot%\system32\dllcache).



By now you should have a greater understanding of Windows File Protection in
Windows XP and how it works.

Please read my separate article on the scannow sfc command line utility that
allows you to manually use the Windows File protection service on your PC.

Disclaimer: Modifying the registry can cause serious problems that may
require you to reinstall your operating system. I cannot guarantee that
problems resulting from modifications to the registry can be solved. Use the
information provided at your own risk.




"Carey Frisch [MVP]" wrote:

1. Go to Start Run and type: CMD , and hit enter.
2. In the Command Prompt window type: SFC /SCANNOW
and hit enter. Have your Windows XP CD available.

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/secu...t/default.aspx

----------------------------------------------------------------------------

"ms. greenhorn" wrote:

| tried to find corrupted file by selecting "run" and entering "sfc/scannow"
| w/no luck; repsonse was could not be found, to re-check the file name.
| trying to repair corrupted file (per ms help desk) without re-installing os.
| oh, and thanks for your suggestion, rick, but here i am, again.

  #7  
Old December 22nd 07, 07:55 PM posted to microsoft.public.windowsxp.newusers
Beagleboy
external usenet poster
 
Posts: 7
Default scan for file corruption

Does it matter which XP cd you use? I have the original, with SP1, and then
Dell sent me another one, with SP2 on it. Would like to know, since I'm
really having a problem with my non-expandable windows boxes decreasing in
size.
Thanks for any help.
--
Ray


"Carey Frisch [MVP]" wrote:

1. Go to Start Run and type: CMD , and hit enter.
2. In the Command Prompt window type: SFC /SCANNOW
and hit enter. Have your Windows XP CD available.

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/secu...t/default.aspx

----------------------------------------------------------------------------

"ms. greenhorn" wrote:

| tried to find corrupted file by selecting "run" and entering "sfc/scannow"
| w/no luck; repsonse was could not be found, to re-check the file name.
| trying to repair corrupted file (per ms help desk) without re-installing os.
| oh, and thanks for your suggestion, rick, but here i am, again.

  #8  
Old December 23rd 07, 10:12 AM posted to microsoft.public.windowsxp.newusers
Bharadwaj Subramaniam
external usenet poster
 
Posts: 1
Default scan for file corruption



Well its like please check the version of Windows installed on your system

Click Start -- Run and type "winver" without quotes....

Now you will know if Windows Xp SP1 or Windows XP SP2 is installed on your
system. Accordingly, you will need to insert the disk in the drive and run
SFC.

If you have Windows XP Sp1 installed use Windows xp SP1 disk or If you have
Windows XP SP2 installed you will have to use windows XP sp2 CD.

Thanks please let me know if this helps..

--
Bharadwaj !!@@!!


"Beagleboy" wrote:

Does it matter which XP cd you use? I have the original, with SP1, and then
Dell sent me another one, with SP2 on it. Would like to know, since I'm
really having a problem with my non-expandable windows boxes decreasing in
size.
Thanks for any help.
--
Ray


"Carey Frisch [MVP]" wrote:

1. Go to Start Run and type: CMD , and hit enter.
2. In the Command Prompt window type: SFC /SCANNOW
and hit enter. Have your Windows XP CD available.

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/secu...t/default.aspx

----------------------------------------------------------------------------

"ms. greenhorn" wrote:

| tried to find corrupted file by selecting "run" and entering "sfc/scannow"
| w/no luck; repsonse was could not be found, to re-check the file name.
| trying to repair corrupted file (per ms help desk) without re-installing os.
| oh, and thanks for your suggestion, rick, but here i am, again.

  #9  
Old March 25th 10, 09:30 PM posted to microsoft.public.windowsxp.newusers
Charlene
external usenet poster
 
Posts: 8
Default scan for file corruption



"ms. greenhorn" wrote:

tried to find corrupted file by selecting "run" and entering "sfc/scannow"
w/no luck; repsonse was could not be found, to re-check the file name.
trying to repair corrupted file (per ms help desk) without re-installing os.
oh, and thanks for your suggestion, rick, but here i am, again.

  #10  
Old March 25th 10, 09:30 PM posted to microsoft.public.windowsxp.newusers
Charlene
external usenet poster
 
Posts: 8
Default scan for file corruption



"ms. greenhorn" wrote:

tried to find corrupted file by selecting "run" and entering "sfc/scannow"
w/no luck; repsonse was could not be found, to re-check the file name.
trying to repair corrupted file (per ms help desk) without re-installing os.
oh, and thanks for your suggestion, rick, but here i am, again.

  #11  
Old July 7th 10, 08:11 PM posted to microsoft.public.windowsxp.newusers
Twayne[_2_]
external usenet poster
 
Posts: 4,276
Default scan for file corruption

In ,
Charlene typed:
"ms. greenhorn" wrote:

tried to find corrupted file by selecting "run" and
entering "sfc/scannow" w/no luck; repsonse was could not
be found, to re-check the file name. trying to repair
corrupted file (per ms help desk) without re-installing
os. oh, and thanks for your suggestion, rick, but here i
am, again.


A restore from backup image should take less than a half hour.
A restore from a 3rd party backup program an hour or so, IFF it backed up
everything needed.
A manual reinstall restoration a couple of days before everything is
tweaked.

Why not use the first method?


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
about:blank virus/spyware IndianFriend General XP issues or comments 6 March 29th 05 07:05 AM
180 search assistant dee General XP issues or comments 2 October 9th 04 01:55 AM
Address Bar Auto Search Jeff M General XP issues or comments 3 October 8th 04 03:52 AM
hijacked home page CANT FIX HIJACKED HOMEPAGE Security and Administration with Windows XP 1 September 14th 04 01:45 AM
Event ID 11 - please help Leroy Casterline Hardware and Windows XP 7 August 27th 04 03:02 AM






All times are GMT +1. The time now is 07:27 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.