Networking two computers

Joe,
Maybe I should give you more information about my
situation. I have been connected to the internet for
years. Each computer can connect on their own. I have a
cable modem. The router is connected to the modem and
then each computer is connected to the router. I have a
desktop and a laptop. Each computer connects separately,
but I cannot share files between the two computers. I
have tried the "wizard" as Microsoft calls it, and I have
tried it using every single configuration they offer. No
matter what I try, it doesn't work. The computers can't
find each other, and then I keep getting error messages
telling me to run the wizard again. Hopefully I have
provided enough information to give you more insight.
Please refer to my original post to see the error message
I keep getting.
Thanks,
Bob
-----Original Message-----
Glad to see your back. So you have never been able to
connect to the internet? Ok is there a main PC or does
your internet connection come from the wall per se" into
the router?

I suggest that you have your internet connection from
your
ISP (from the wall) go directly into your PC and then
add
another NIC card going out to your router or just
install
a wireless nic and one inside your laptop. Another
configuration is this. If all you have are two PC's 1
desktop and 1 laptop It should work with the router
Like
this:

Into the router from your cable modem/ISP/Wall make sure
you are using the correct port on the router (there is
only one for incoming) and then the following cables or
wireles out of the router (outgoing) Think about trying
to
connect without using the wizard an see what you get.

Just another test here Bob:
plug the internet connection from the wall into the
router
and then plug a cable out of the router into the laptop
or
PC just one of them and see if you can get to the net.

I do not know exactly how you want to network so I am
assuming you want all your PC's to access the net via
the
router.
Joe
-----Original Message-----
Joe,
what do you mean by your question? I'm not sure what
you
mean, but I'll try to answer it. I am using a router
and
I have a desktop and laptop. The network wizard in XP
is
doing absolutely nothing to help me. I keep getting
error messages when I try to run the wizard, the
computers can't find each other, it cannot find
MSHOME.
I have tried to run the wizard at least a couple dozen
times over the past year and a half, and it NEVER
works.
You think I'm frustrated? I passed frustrated about 6
months ago. Thanks,
Bob

-----Original Message-----
How are you connecting the PC's Bob?
with what type of hardware? and please calm down I
know
you are frustrated but hang in there you will get it.
Joe
-----Original Message-----
Eric,
thanks for your reply, but I tried your suggestions
and
of course they didn't work. As far as I'm concerned,
Microsoft can take their network wizard and shove it
up
Bill Gates' ass.
Bob

-----Original Message-----
Greetings Bob,

Make sure the XP's firewall is disabled. It will
block
file and printer
sharing by default. If you installed a third party
firewall such as
ZoneAlarm, Sygate, or Norton make sure it is
properly
configured for the
network. Ensure NetBIOS over TCP/IP is enabled.
Details
here.

Enable NetBIOS Over TCP/IP (NetBT)
http://www.practicallynetworked.com/sharing/troublesh
oo
t/
netbt.htm

__________________
Eric


"Bob" wrote in
message
. ..
I have tried dozens of times to get my two
computers
to
network, but I have had no luck. I have run the
Windows
XP netork wizard (if you want to call it that), but
EVERYTIME I run it, it fails to set up the
wizard. I
keep getting the following message when I try to
View
the
workgroup computers--

Mshome is not accessible. You might not have
permission
to use this network resource. Contact the
administrator
of this server to find out if you have access
permission. The list of servers for this
workgroup
is
not currently available.

Any clues as to what I can do to get this network
to
work? Obviously Windows XP does not work well for
networking!


.

.

.

.

.