If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Router password
I have misplaced my router password. I know it is saved somewhere in
my Win 7 computer --- because I don't need to reset for power outages etc. Where in my Win 7 computer is the router code stored? |
Ads |
#2
|
|||
|
|||
Router password
On Sun, 17 Dec 2017 14:15:19 -0600, Mathedman wrote:
I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. Where in my Win 7 computer is the router code stored? Look in this file: C:\Users\Madman\Documents\Speshul\Hidden\Router-Passwords.doc |
#3
|
|||
|
|||
Router password
On 12/17/2017 12:15 PM, Mathedman wrote:
I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. Where in my Win 7 computer is the router code stored? The router does not store the password in your PC. It stores it within the router itself. I do not know how other brands of router handle this, but my Netgear router has a factory reset button. It requires a thin rod (e.g., the end of a paperclip) to reach and push the button. After doing that, the user ID is "admin", which cannot be changed; and the password is "password", which can be changed. I changed the password immediately after I setup my router, and I change it again periodically. -- David E. Ross http://www.rossde.com/ President Trump: Please stop using Twitter. We need to hear your voice and see you talking. We need to know when your message is really your own and not your attorney's. |
#4
|
|||
|
|||
Router password
On 17/12/2017 20:15, Mathedman wrote:
** I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. ** Where in my Win 7 computer is the router code stored? Do you mean a) the password to log in to the router to get line statistics, configure port forwarding etc. etc. ? or b) the WiFi password (or "pass phrase") you need to connect to the WiFi the router provides? -- Brian Gregory (in the UK). To email me please remove all the letter vee from my email address. |
#5
|
|||
|
|||
Router password
On 12/17/2017 12:31 PM, Sam Hill wrote:
On Sun, 17 Dec 2017 14:15:19 -0600, Mathedman wrote: I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. Where in my Win 7 computer is the router code stored? Look in this file: C:\Users\Madman\Documents\Speshul\Hidden\Router-Passwords.doc LOL, best laugh of the day, thanks. |
#6
|
|||
|
|||
Router password
Il giorno Sun 17 Dec 2017 09:31:05p, *Sam Hill* ha inviato su
alt.windows7.general il messaggio news cosa ha scritto: Look in this file: C:\Users\Madman\Documents\Speshul\Hidden\Router-Passwords.doc my antivirus blocks your .doc file can you zip it? -- /-\ /\/\ /\/\ /-\ /\/\ /\/\ /-\ T /-\ -=- -=- -=- -=- -=- -=- -=- -=- - -=- http://www.bb2002.it ............ [ al lavoro ] ........... |
#7
|
|||
|
|||
Router password
Ammammata wrote:
Il giorno Sun 17 Dec 2017 09:31:05p, *Sam Hill* ha inviato su alt.windows7.general il messaggio news cosa ha scritto: Look in this file: C:\Users\Madman\Documents\Speshul\Hidden\Router-Passwords.doc my antivirus blocks your .doc file can you zip it? Here you go. C:\Users\Madman\Documents\Speshul\Hidden\Router-Passwords.doc.zip I looked in the file, and all I could see is "12345678" and the name of some dog "rover". Paul |
#8
|
|||
|
|||
Router password
On 12/17/2017 12:15 PM, Mathedman wrote:
** I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. ** Where in my Win 7 computer is the router code stored? What make and model is the router? |
#9
|
|||
|
|||
Router password
On 12/17/2017 02:15 PM, Mathedman wrote:
** I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. ** Where in my Win 7 computer is the router code stored? What browser have you been using to access your router? It may remember the password. -- 7 days until the winter celebration (Monday December 25, 2017 12:00:00 AM for 1 day). Mark Lloyd http://notstupid.us/ "I am a demo religious meme which has been replicated here. You will be blessed if you copy me and pass me on to infect the next mind. And damned if you don't." |
#10
|
|||
|
|||
Router password
On 12/17/2017 09:45 PM, Mike S wrote:
On 12/17/2017 12:31 PM, Sam Hill wrote: On Sun, 17 Dec 2017 14:15:19 -0600, Mathedman wrote: I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. **** Where in my Win 7 computer is the router code stored? Look in this file: C:\Users\Madman\Documents\Speshul\Hidden\Router-Passwords.doc LOL, best laugh of the day, thanks. YEP! |
#11
|
|||
|
|||
Router password
On 12/17/2017 03:20 PM, David E. Ross wrote:
On 12/17/2017 12:15 PM, Mathedman wrote: I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. Where in my Win 7 computer is the router code stored? The router does not store the password in your PC. It stores it within the router itself. I do not know how other brands of router handle this, but my Netgear router has a factory reset button. It requires a thin rod (e.g., the end of a paperclip) to reach and push the button. After doing that, the user ID is "admin", which cannot be changed; and the password is "password", which can be changed. I changed the password immediately after I setup my router, and I change it again periodically. Correct. Best to just re-set the router and assign a new password. |
#12
|
|||
|
|||
Router password
On Sun, 17 Dec 2017 13:20:00 -0800, "David E. Ross"
wrote: On 12/17/2017 12:15 PM, Mathedman wrote: I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. Where in my Win 7 computer is the router code stored? The router does not store the password in your PC. It stores it within the router itself. That happens to not be entirely true. Firefox and other browsers do store the router password and userid combination if you tell them to, assuming you have used the browser login page at some time. "Tools/Options/Security/Remember logins for sites" or "File", "preferences" .... or some similar combination. You will need to click on the "show passwords" and "yes, you nagging little bugger I really *DO* want to do this" buttons. I do not know how other brands of router handle this, but my Netgear router has a factory reset button. It requires a thin rod (e.g., the end of a paperclip) to reach and push the button. After doing that, the user ID is "admin", which cannot be changed; and the password is "password", which can be changed. I changed the password immediately after I setup my router, and I change it again periodically. Standard passwords may be "1234", "0000", "admin", "Administrator" or something equally secure. The factory reset password may even be on a label stuck to the router. If everything else fails, calling your ISP helpdesk is a good move. They can either supply the default password or reset it remotely. Once they have done this, changing it using the web page interface is easy. *ALWAYS* change it immediately after resetting it to the default. Leaving the default in makes your network very, very open to exploitation. Mand. |
#13
|
|||
|
|||
Router password
In message , Brian
Gregory writes: On 17/12/2017 20:15, Mathedman wrote: ** I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. ** Where in my Win 7 computer is the router code stored? Do you mean a) the password to log in to the router to get line statistics, configure port forwarding etc. etc. ? The one to control aspects of the router itself (including the one below) or b) the WiFi password (or "pass phrase") you need to connect to the WiFi the router provides? The one for access to the wifi or c) the one to connect to the (A)DSL line? (Actually, I'm not sure if that one is more a user name/number than a password - might be both - but it/they is/are stored in the router.) You need a to change b or c. You need b to even get access so you can enter a, if you're connecting by wifi, but not if you're (even temporarily) connecting by cable (which is one option if you forget b). For a the username is often admin and the password admin (again) or password, so it is indeed a good idea to change those. For b they're often on a label on the router, if you haven't changed them. For c, you'll need to look at the paperwork provided by your ISP - _don't_ do a "factory reset" (paperclip) if you _don't_ have a note of these, if it's a router other than one provided by your ISP. (If it is, it _may_ be configured such that resetting it resets to the right thing. But it may not!) To answer the original question: a is probably stored in your browser, if you have it configured to store passwords. The wifi one b is stored with the network connections alongside the SSID (wifi network name), though I'm not sure you can tell Windows to show it as other than blobs. The ADSL details c are AFAIK _only_ stored in the router. -- J. P. Gilliver. UMRA: 1960/1985 MB++G()AL-IS-Ch++(p)Ar@T+H+Sh0!:`)DNAf Grief generates a huge energy in you and it's better for everybody if you harness it to do something. - Judi Dench, RT 2015/2/28-3/6 |
#14
|
|||
|
|||
Router password
On 12/19/2017 12:56 AM, Mandy Liefbowitz wrote:
[snip] If everything else fails, calling your ISP helpdesk is a good move. They can either supply the default password or reset it remotely. Once they have done this, changing it using the web page interface is easy. Particularly if you got this router from the ISP, rather than using your own. *ALWAYS* change it immediately after resetting it to the default. Leaving the default in makes your network very, very open to exploitation. Mand. Yes, always change it from the default. Change WiFi SSIDs too. BTW, about 10 years ago I found THREE wireless networks around here. ALL called "Linksys" and with no security. Most are doing better now. -- 6 days until the winter celebration (Monday December 25, 2017 12:00:00 AM for 1 day). Mark Lloyd http://notstupid.us/ "Cogito, ergo non credo." |
#15
|
|||
|
|||
Router password
On 18/12/2017 4:15 AM, Mathedman wrote:
I have misplaced my router password. I know it is saved somewhere in my Win 7 computer --- because I don't need to reset for power outages etc. Where in my Win 7 computer is the router code stored? Why not just reset the router? You using mostly default settings right? -- @~@ Remain silent! Drink, Blink, Stretch! Live long and prosper!! / v \ Simplicity is Beauty! /( _ )\ May the Force and farces be with you! ^ ^ (x86_64 Ubuntu 9.10) Linux 2.6.39.3 不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA): http://www.swd.gov.hk/tc/index/site_...sub_addressesa |
|
Thread Tools | |
Display Modes | Rate This Thread |
|
|