A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Windows XP and video cards, drivers and similar
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Allocate memory



 
 
Thread Tools Display Modes
  #1  
Old December 21st 08, 11:03 PM posted to microsoft.public.windowsxp.video
Laci
external usenet poster
 
Posts: 1
Default Allocate memory

Hi everybody,
I'd like to know, if somebody can help me, if is any possibilities to set
the amount of memory used by the on board videocard. I tried to set it up on
the BIOS, but I couldn't find any settings of this kind. I'm using a
Fujitsu-Siemens Esprimo P5905 i945G, with an Intel 82945G on board video
card. The system has 2GB of memory and I'm using Windows XP Professional SP3.
Thank you
Ads
  #2  
Old December 22nd 08, 01:07 AM posted to microsoft.public.windowsxp.video
Andrew E.
external usenet poster
 
Posts: 3,409
Default Allocate memory

If the board supports a setting like that it would be in "Chipset
configuration"
or similiar,however that setting usually is/was found on earlier MBs
(815,845,
848).Either way,no matter what setting thier is or lack of,on-board video
is poor at best.Just about any aftermarket card will perform 10X better,even
the 35.00 ones.

"Laci" wrote:

Hi everybody,
I'd like to know, if somebody can help me, if is any possibilities to set
the amount of memory used by the on board videocard. I tried to set it up on
the BIOS, but I couldn't find any settings of this kind. I'm using a
Fujitsu-Siemens Esprimo P5905 i945G, with an Intel 82945G on board video
card. The system has 2GB of memory and I'm using Windows XP Professional SP3.
Thank you

  #3  
Old December 22nd 08, 12:22 PM posted to microsoft.public.windowsxp.video
TompangBuddy.Com
external usenet poster
 
Posts: 141
Default Allocate memory

Hello,

Your chipset uses Dynamic Video Memory Technology. See
http://download.intel.com/design/chi...s/30750801.pdf

--
http://www.tompangbuddy.com
Share Cab, Carpool and Save Earth in Singapore
"Laci" wrote in message
...
Hi everybody,
I'd like to know, if somebody can help me, if is any possibilities to set
the amount of memory used by the on board videocard. I tried to set it up
on
the BIOS, but I couldn't find any settings of this kind. I'm using a
Fujitsu-Siemens Esprimo P5905 i945G, with an Intel 82945G on board video
card. The system has 2GB of memory and I'm using Windows XP Professional
SP3.
Thank you



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 02:05 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.