If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Could not load file hal.dll (error no.7)!
I've encountered this message for several times when i try to format the hard
disk (using the existing and new unit also got problem). I thought that message comes from the XP installer itself then i try to used other XP cd's (in my company) to installed that pc but fails due to that error message. I've try to google it but fail due to different case. I've try to used other XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one can help me and explain to me why this thing could happen! Thanks.. |
Ads |
#2
|
|||
|
|||
Could not load file hal.dll (error no.7)!
"Asuran" wrote in message ... I've encountered this message for several times when i try to format the hard disk (using the existing and new unit also got problem). I thought that message comes from the XP installer itself then i try to used other XP cd's (in my company) to installed that pc but fails due to that error message. I've try to google it but fail due to different case. I've try to used other XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one can help me and explain to me why this thing could happen! Thanks.. You write "when i try to format the hard disk". How exactly are you formatting your hard disk? |
#3
|
|||
|
|||
Could not load file hal.dll (error no.7)!
I'm using the winxp cd to format the hard disk (clean format), during booting
it goes to licensing agreement up to there it shown me that message. Could it be any other hardware problem such as ram, psu or mobo? thanks "Pegasus (MVP)" wrote: "Asuran" wrote in message ... I've encountered this message for several times when i try to format the hard disk (using the existing and new unit also got problem). I thought that message comes from the XP installer itself then i try to used other XP cd's (in my company) to installed that pc but fails due to that error message. I've try to google it but fail due to different case. I've try to used other XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one can help me and explain to me why this thing could happen! Thanks.. You write "when i try to format the hard disk". How exactly are you formatting your hard disk? |
#4
|
|||
|
|||
Could not load file hal.dll (error no.7)!
If you booted the machine with your WinXP installation
CD and if the installation process then generated the message "Could not load file hal.dll" then the likely causes are a) Your installation CD is corrupt, or b) You have a hardware problem. "Asuran" wrote in message ... I'm using the winxp cd to format the hard disk (clean format), during booting it goes to licensing agreement up to there it shown me that message. Could it be any other hardware problem such as ram, psu or mobo? thanks "Pegasus (MVP)" wrote: "Asuran" wrote in message ... I've encountered this message for several times when i try to format the hard disk (using the existing and new unit also got problem). I thought that message comes from the XP installer itself then i try to used other XP cd's (in my company) to installed that pc but fails due to that error message. I've try to google it but fail due to different case. I've try to used other XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one can help me and explain to me why this thing could happen! Thanks.. You write "when i try to format the hard disk". How exactly are you formatting your hard disk? |
#5
|
|||
|
|||
Could not load file hal.dll (error no.7)!
....had this in distant past and bad RAM was the problem :-)
regards, Richard "Pegasus (MVP)" wrote in message ... If you booted the machine with your WinXP installation CD and if the installation process then generated the message "Could not load file hal.dll" then the likely causes are a) Your installation CD is corrupt, or b) You have a hardware problem. "Asuran" wrote in message ... I'm using the winxp cd to format the hard disk (clean format), during booting it goes to licensing agreement up to there it shown me that message. Could it be any other hardware problem such as ram, psu or mobo? thanks "Pegasus (MVP)" wrote: "Asuran" wrote in message ... I've encountered this message for several times when i try to format the hard disk (using the existing and new unit also got problem). I thought that message comes from the XP installer itself then i try to used other XP cd's (in my company) to installed that pc but fails due to that error message. I've try to google it but fail due to different case. I've try to used other XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one can help me and explain to me why this thing could happen! Thanks.. You write "when i try to format the hard disk". How exactly are you formatting your hard disk? |
#6
|
|||
|
|||
solution of error - 7
how solve this problems
stevenchan45 wrote: Could not load file hal.dll (error no.7)! 06-Nov-07 I've encountered this message for several times when i try to format the hard disk (using the existing and new unit also got problem). I thought that message comes from the XP installer itself then i try to used other XP cd's (in my company) to installed that pc but fails due to that error message. I've try to google it but fail due to different case. I've try to used other XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one can help me and explain to me why this thing could happen! Thanks.. Previous Posts In This Thread: On Tuesday, November 06, 2007 11:51 PM stevenchan45 wrote: Could not load file hal.dll (error no.7)! I've encountered this message for several times when i try to format the hard disk (using the existing and new unit also got problem). I thought that message comes from the XP installer itself then i try to used other XP cd's (in my company) to installed that pc but fails due to that error message. I've try to google it but fail due to different case. I've try to used other XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one can help me and explain to me why this thing could happen! Thanks.. On Wednesday, November 07, 2007 7:07 AM Pegasus \(MVP\) wrote: Could not load file hal.dll (error no.7)! You write "when i try to format the hard disk". How exactly are you formatting your hard disk? On Wednesday, November 07, 2007 9:22 PM stevenchan45 wrote: I'm using the winxp cd to format the hard disk (clean format), during booting I'm using the winxp cd to format the hard disk (clean format), during booting it goes to licensing agreement up to there it shown me that message. Could it be any other hardware problem such as ram, psu or mobo? thanks "Pegasus (MVP)" wrote: On Thursday, November 08, 2007 4:17 AM Pegasus \(MVP\) wrote: If you booted the machine with your WinXP installationCD and if the If you booted the machine with your WinXP installation CD and if the installation process then generated the message "Could not load file hal.dll" then the likely causes are a) Your installation CD is corrupt, or b) You have a hardware problem. "Asuran" wrote in message ... On Thursday, November 08, 2007 11:19 AM RJK wrote: .... ....had this in distant past and bad RAM was the problem :-) regards, Richard Submitted via EggHeadCafe - Software Developer Portal of Choice XAML Organizer http://www.eggheadcafe.com/tutorials...organizer.aspx |
#7
|
|||
|
|||
solution of error - 7
how solve this problems
stevenchan45 wrote: Could not load file hal.dll (error no.7)! 06-Nov-07 I've encountered this message for several times when i try to format the hard disk (using the existing and new unit also got problem). I thought that message comes from the XP installer itself then i try to used other XP cd's (in my company) to installed that pc but fails due to that error message. I've try to google it but fail due to different case. I've try to used other XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one can help me and explain to me why this thing could happen! Thanks.. Previous Posts In This Thread: On Tuesday, November 06, 2007 11:51 PM stevenchan45 wrote: Could not load file hal.dll (error no.7)! I've encountered this message for several times when i try to format the hard disk (using the existing and new unit also got problem). I thought that message comes from the XP installer itself then i try to used other XP cd's (in my company) to installed that pc but fails due to that error message. I've try to google it but fail due to different case. I've try to used other XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one can help me and explain to me why this thing could happen! Thanks.. On Wednesday, November 07, 2007 7:07 AM Pegasus \(MVP\) wrote: Could not load file hal.dll (error no.7)! You write "when i try to format the hard disk". How exactly are you formatting your hard disk? On Wednesday, November 07, 2007 9:22 PM stevenchan45 wrote: I'm using the winxp cd to format the hard disk (clean format), during booting I'm using the winxp cd to format the hard disk (clean format), during booting it goes to licensing agreement up to there it shown me that message. Could it be any other hardware problem such as ram, psu or mobo? thanks "Pegasus (MVP)" wrote: On Thursday, November 08, 2007 4:17 AM Pegasus \(MVP\) wrote: If you booted the machine with your WinXP installationCD and if the If you booted the machine with your WinXP installation CD and if the installation process then generated the message "Could not load file hal.dll" then the likely causes are a) Your installation CD is corrupt, or b) You have a hardware problem. "Asuran" wrote in message ... On Thursday, November 08, 2007 11:19 AM RJK wrote: .... ....had this in distant past and bad RAM was the problem :-) regards, Richard Submitted via EggHeadCafe - Software Developer Portal of Choice XAML Organizer http://www.eggheadcafe.com/tutorials...organizer.aspx |
#8
|
|||
|
|||
solution of error - 7
Get back into your time machine and go back to 2007 when the post
originated. munna prasad wrote in message ... : how solve this problems : : : : : stevenchan45 wrote: : : Could not load file hal.dll (error no.7)! : 06-Nov-07 : : I've encountered this message for several times when i try to format the hard : disk (using the existing and new unit also got problem). I thought that : message comes from the XP installer itself then i try to used other XP cd's : (in my company) to installed that pc but fails due to that error message. : I've try to google it but fail due to different case. I've try to used other : XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one : can help me and explain to me why this thing could happen! Thanks.. : : Previous Posts In This Thread: : : On Tuesday, November 06, 2007 11:51 PM : stevenchan45 wrote: : : Could not load file hal.dll (error no.7)! : I've encountered this message for several times when i try to format the hard : disk (using the existing and new unit also got problem). I thought that : message comes from the XP installer itself then i try to used other XP cd's : (in my company) to installed that pc but fails due to that error message. : I've try to google it but fail due to different case. I've try to used other : XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one : can help me and explain to me why this thing could happen! Thanks.. : : On Wednesday, November 07, 2007 7:07 AM : Pegasus \(MVP\) wrote: : : Could not load file hal.dll (error no.7)! : You write "when i try to format the hard disk". How exactly are : you formatting your hard disk? : : On Wednesday, November 07, 2007 9:22 PM : stevenchan45 wrote: : : I'm using the winxp cd to format the hard disk (clean format), during booting : I'm using the winxp cd to format the hard disk (clean format), during booting : it goes to licensing agreement up to there it shown me that message. Could it : be any other hardware problem such as ram, psu or mobo? thanks : : "Pegasus (MVP)" wrote: : : On Thursday, November 08, 2007 4:17 AM : Pegasus \(MVP\) wrote: : : If you booted the machine with your WinXP installationCD and if the : If you booted the machine with your WinXP installation : CD and if the installation process then generated the : message "Could not load file hal.dll" then the likely causes : are : a) Your installation CD is corrupt, or : b) You have a hardware problem. : : : "Asuran" wrote in message : ... : : On Thursday, November 08, 2007 11:19 AM : RJK wrote: : : ... : ...had this in distant past and bad RAM was the problem :-) : : regards, Richard : : : Submitted via EggHeadCafe - Software Developer Portal of Choice : XAML Organizer : http://www.eggheadcafe.com/tutorials...organizer.aspx |
#9
|
|||
|
|||
solution of error - 7
Get back into your time machine and go back to 2007 when the post
originated. munna prasad wrote in message ... : how solve this problems : : : : : stevenchan45 wrote: : : Could not load file hal.dll (error no.7)! : 06-Nov-07 : : I've encountered this message for several times when i try to format the hard : disk (using the existing and new unit also got problem). I thought that : message comes from the XP installer itself then i try to used other XP cd's : (in my company) to installed that pc but fails due to that error message. : I've try to google it but fail due to different case. I've try to used other : XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one : can help me and explain to me why this thing could happen! Thanks.. : : Previous Posts In This Thread: : : On Tuesday, November 06, 2007 11:51 PM : stevenchan45 wrote: : : Could not load file hal.dll (error no.7)! : I've encountered this message for several times when i try to format the hard : disk (using the existing and new unit also got problem). I thought that : message comes from the XP installer itself then i try to used other XP cd's : (in my company) to installed that pc but fails due to that error message. : I've try to google it but fail due to different case. I've try to used other : XP cd's and hard disk but none is work. Hdd using is 40GB WD. hope some one : can help me and explain to me why this thing could happen! Thanks.. : : On Wednesday, November 07, 2007 7:07 AM : Pegasus \(MVP\) wrote: : : Could not load file hal.dll (error no.7)! : You write "when i try to format the hard disk". How exactly are : you formatting your hard disk? : : On Wednesday, November 07, 2007 9:22 PM : stevenchan45 wrote: : : I'm using the winxp cd to format the hard disk (clean format), during booting : I'm using the winxp cd to format the hard disk (clean format), during booting : it goes to licensing agreement up to there it shown me that message. Could it : be any other hardware problem such as ram, psu or mobo? thanks : : "Pegasus (MVP)" wrote: : : On Thursday, November 08, 2007 4:17 AM : Pegasus \(MVP\) wrote: : : If you booted the machine with your WinXP installationCD and if the : If you booted the machine with your WinXP installation : CD and if the installation process then generated the : message "Could not load file hal.dll" then the likely causes : are : a) Your installation CD is corrupt, or : b) You have a hardware problem. : : : "Asuran" wrote in message : ... : : On Thursday, November 08, 2007 11:19 AM : RJK wrote: : : ... : ...had this in distant past and bad RAM was the problem :-) : : regards, Richard : : : Submitted via EggHeadCafe - Software Developer Portal of Choice : XAML Organizer : http://www.eggheadcafe.com/tutorials...organizer.aspx |
Thread Tools | |
Display Modes | |
|
|