If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Can't update W10
Hi all,
Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says: 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. Fokke Nauta |
Ads |
#2
|
|||
|
|||
Can't update W10
On Tue, 23 Jan 2018 11:50:26 +0100, Fokke Nauta
wrote: Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says: 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. You don't want 1709 so count yourself lucky. However you can use W10 help. Fokke Nauta |
#3
|
|||
|
|||
Can't update W10
Fokke Nauta wrote:
Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says: 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. Fokke Nauta And that worked ? ("I choosed company pc") You're not supposed to do that. The "free" upgrade is for *home* users. Whether installing Home or Pro, you are a "home user". Pretend to be a humble home user. That's a trick question to catch Enterprise end-users trying to thwart their IT department by "pouring crap" over top of carefully prepared IT OS installations. People were doing that at their work, blowing away the company OS image, which is why the trick question is there to stop the installation. The install should stop if you answer "as a business user". Or, it'll fail to activate, and go into grace mode. It won't be activated and after 30 days it'll indicate the end of the grace period. The grace period exists so IT people can prepare a machine for deployment, which may take days to do. The Digital Entitlement, you have until the end of January to generate one. This is a priority, and is what you need to achieve now. The current date is Jan23 and not much time remains for free upgrades. Check to see if it's activated. slmgr /dlv Does it say "activated" ? If you have a big investment (time spent) setting this up, then 1) make a backup of at least C: and System Reserved 2) slui 4 Enter the Win7 key and see if it is accepted. I don't know if that will override how you answered The Question, but it might. The idea is to convert the Win7 key into a digital entitlement. 3) Verify with slmgr /dlv 4) If you screw up, you can restore from (1). An alternative is: 1) Backup the current fully-fleshed Win10 install 2) Restore the Win7 image you made before this exercise started. You made a backup, right ? You're not relying on the "Revert" capability to save you I hope. It works, but it is slow and less than perfect. 3) Install Win10 over the restored Win7. 4) Answer "Home" user when The Question appears. 5) slmgr /dlv to check for Digital Entitlement and activation. 6) Now, restore the image from (1). Check activation. Use the command to activate if it's not activated, as the Digital Entitlement on the MS server from (5) should be enough to authorize the current installation. The key message here is, get your "activation" status worked out, no matter what, before the end of the month, or it's going to cost you $150 to fix later. You want proof you have Digital Entitlement now. I did this on my current machine, on Dec.31 (when the idea was, that was the last day). I got my Digital Entitlement completed, then I removed Windows 10 from the machine (for now). In future, I may need to restore it again, and the Digital Entitlement is waiting for me when I need it. It's like "free money" in a sense. Maybe if I sell my computer, it'll be the OS of choice to put on it :-) So I won't be wasting any other OSes. The Digital Entitlement and free upgrade is available until Jan.31 or so. Whatever the last day of the month is. ******* If you are actually Activated and that part is OK, then there is less to worry about. To enter Control Panels, use Start : Run and control control.exe And that will bring up the traditional Control Panel interface. You can pin this to the Task Bar so you won't have to do it a second time. In there, is a Troubleshooter control panel. Select it. The Troubleshooter should have a box in the upper right hand corner for "Search". Search for "Update" or "Windows Update". You get the idea. The Windows Update troubleshooter should be able to clean out the gigabytes of files in SoftwareDistribution. This has been known to help get Windows Update working again. A script on tenforums.com is available to do this too, and the TroubleShooter that Microsoft uses, does all the same steps. After doing that, and trying Settings gear wheel and "Updates and Security" from the Settings panel, report back how many updates aren't installed or are broken. You can also download updates from catalog.update.microsoft.com. Those come in executable .msu format. To install one in relative peace, you can: 1) Download the KB file matching your OS, from the selection you made in catalog.update.microsoft.com. If you have a list of failed updates, you can download all of those now, and save for the next steps. 2) Disconnect the network cable. Reboot. (This step puts wuauserv in a benign state. Since the network is no longer available to the OS, then wuauserv has no choice but to listen to the "query" from the .msu you're about to launch.) 3) Double click the .msu to install. 4) If you have multiple .msu files, *don't* click the reboot button you see. Only click reboot when the *last* .msu is installed. 5) Do your reboot. Reconnect the network cable when you feel like it. That doesn't "force" an update, but it is an alternate method to resolve a broken update. I've only had a couple of occasions where that method didn't get me past a "fail" one. HTH, Paul |
#4
|
|||
|
|||
Can't update W10
On 23-1-2018 12:37, Paul wrote:
Fokke Nauta wrote: Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says: 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. Fokke Nauta And that worked ? ("I choosed company pc") Yes, it did. No problem. You're not supposed to do that. The "free" upgrade is for *home* users. Whether installing Home or Pro, you are a "home user". Pretend to be a humble home user. Well, I have quite a humble nature :-) But I thought we have a professional LAN. That's a trick question to catch Enterprise end-users trying to thwart their IT department by "pouring crap" over top of carefully prepared IT OS installations. People were doing that at their work, blowing away the company OS image, which is why the trick question is there to stop the installation. Yes, I can imagine. Once upon a time I performed maintenance on desktop computers and the server in a community center. The install should stop if you answer "as a business user". No, it didn't. Or, it'll fail to activate, and go into grace mode. It won't be activated and after 30 days it'll indicate the end of the grace period. The grace period exists so IT people can prepare a machine for deployment, which may take days to do. It activated very well. It was not a W7 upgrade but a fresh W10 installation. The Digital Entitlement, you have until the end of January to generate one. This is a priority, and is what you need to achieve now. The current date is Jan23 and not much time remains for free upgrades. Check to see if it's activated. slmgr /dlv Does it say "activated" ? In PC settings it says that Windows is activated with a digital license. If you have a big investment (time spent) setting this up, then 1) make a backup of at least C: and System Reserved 2) slui 4 Enter the Win7 key and see if it is accepted. I don't know if that will override how you answered The Question, but it might. The idea is to convert the Win7 key into a digital entitlement. 3) Verify with slmgr /dlv 4) If you screw up, you can restore from (1). An alternative is: 1) Backup the current fully-fleshed Win10 install 2) Restore the Win7 image you made before this exercise started. As it is a newly built pc with a fresh W10 installation, there is no W7 image. You made a backup, right ? You're not relying on the "Revert" capability to save you I hope. It works, but it is slow and less than perfect. 3) Install Win10 over the restored Win7. 4) Answer "Home" user when The Question appears. 5) slmgr /dlv to check for Digital Entitlement and activation. 6) Now, restore the image from (1). Check activation. Use the command to activate if it's not activated, as the Digital Entitlement on the MS server from (5) should be enough to authorize the current installation. The key message here is, get your "activation" status worked out, no matter what, before the end of the month, or it's going to cost you $150 to fix later. You want proof you have Digital Entitlement now. I did this on my current machine, on Dec.31 (when the idea was, that was the last day). I got my Digital Entitlement completed, then I removed Windows 10 from the machine (for now). In future, I may need to restore it again, and the Digital Entitlement is waiting for me when I need it. It's like "free money" in a sense. Maybe if I sell my computer, it'll be the OS of choice to put on it :-) So I won't be wasting any other OSes. The Digital Entitlement and free upgrade is available until Jan.31 or so. Whatever the last day of the month is. ******* If you are actually Activated and that part is OK, then there is less to worry about. I'm happy to read that. To enter Control Panels, use Start : Run and control control.exe And that will bring up the traditional Control Panel interface. You can pin this to the Task Bar so you won't have to do it a second time. In there, is a Troubleshooter control panel. Select it. The Troubleshooter should have a box in the upper right hand corner for "Search". Search for "Update" or "Windows Update". You get the idea. Yes, it says that some settings are set by the organisation (or somethinh like that). Anyway, the automatic update is disabled, and I don't mind. I can do that manually, can't I? No, obviously not. The Windows Update troubleshooter should be able to clean out the gigabytes of files in SoftwareDistribution. This has been known to help get Windows Update working again. A script on tenforums.com is available to do this too, and the TroubleShooter that Microsoft uses, does all the same steps. Ah. This reminds me of a trick with W7 updates trouble: 1) stop the windows update service 2) delete the Windows\SoftwareDistribution folder 3) restart the service 4) reopen the Update Windows dialog. Click the update button. Quess what? It's updating KB4054517 now. After doing that, and trying Settings gear wheel and "Updates and Security" from the Settings panel, report back how many updates aren't installed or are broken. You can also download updates from catalog.update.microsoft.com. Those come in executable .msu format. To install one in relative peace, you can: 1) Download the KB file matching your OS, from the selection you made in catalog.update.microsoft.com. If you have a list of failed updates, you can download all of those now, and save for the next steps. 2) Disconnect the network cable. Reboot. (This step puts wuauserv in a benign state. Since the network is no longer available to the OS, then wuauserv has no choice but to listen to the "query" from the .msu you're about to launch.) 3) Double click the .msu to install. 4) If you have multiple .msu files, *don't* click the reboot button you see. Only click reboot when the *last* .msu is installed. 5) Do your reboot. Reconnect the network cable when you feel like it. That doesn't "force" an update, but it is an alternate method to resolve a broken update. I've only had a couple of occasions where that method didn't get me past a "fail" one. Using this process sounds like a good idea when everything else fails. Or should I format the SSD and install W10 from scratch again, but this time as a home user? I purchased an OEM license, would I be allright with my activation again? Thanks, Fokke HTH, Paul |
#5
|
|||
|
|||
Can't update W10
On 23-1-2018 12:25, Lucifer Morningstar wrote:
On Tue, 23 Jan 2018 11:50:26 +0100, Fokke Nauta wrote: Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says: 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. You don't want 1709 so count yourself lucky. However you can use W10 help. Fokke Nauta I have 1709, whatever it might be. No good? |
#6
|
|||
|
|||
Can't update W10
On 23-1-2018 13:40, Fokke Nauta wrote:
On 23-1-2018 12:37, Paul wrote: Fokke Nauta wrote: Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says: 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. Fokke Nauta cut The Windows Update troubleshooter should be able to clean out the gigabytes of files in SoftwareDistribution. This has been known to help get Windows Update working again. A script on tenforums.com is available to do this too, and the TroubleShooter that Microsoft uses, does all the same steps. Ah. This reminds me of a trick with W7 updates trouble: 1) stop the windows update service 2) delete the Windows\SoftwareDistribution folder 3) restart the service 4) reopen the Update Windows dialog. Click the update button. Quess what? It's updating KB4054517 now. Well, it did and it required a restart after installing. After that I went looking for updates again but it tried to download the same update again. This time it won't download. And it said that the installation of KB4054517 failed. So - back to square one :-( After doing that, and trying Settings gear wheel and "Updates and Security" from the Settings panel, report back how many updates aren't installed or are broken. You can also download updates from catalog.update.microsoft.com. Took a look into that. There are so many drivers that I don't know which ones to choose. Those come in executable .msu format. To install one in relative peace, you can: 1) Download the KB file matching your OS, from the selection you made in catalog.update.microsoft.com. If you have a list of failed updates, you can download all of those now, and save for the next steps. 2) Disconnect the network cable. Reboot. (This step puts wuauserv in a benign state. Since the network is no longer available to the OS, then wuauserv has no choice but to listen to the "query" from the .msu you're about to launch.) 3) Double click the .msu to install. 4) If you have multiple .msu files, *don't* click the reboot button you see. Only click reboot when the *last* .msu is installed. 5) Do your reboot. Reconnect the network cable when you feel like it. That doesn't "force" an update, but it is an alternate method to resolve a broken update. I've only had a couple of occasions where that method didn't get me past a "fail" one. Using this process sounds like a good idea when everything else fails. Or should I format the SSD and install W10 from scratch again, but this time as a home user? I purchased an OEM license, would I be allright with my activation again? Thanks, Fokke HTH, Paul |
#7
|
|||
|
|||
Can't update W10
Fokke Nauta wrote:
Or should I format the SSD and install W10 from scratch again, but this time as a home user? I purchased an OEM license, would I be allright with my activation again? Thanks, Fokke If your Windows Update is working, do you really need to test that ? The OEM license would likely be a System Builder license, as a royalty license for Win10, would include an MSDM table in the BIOS chip for re-activation. I'm not really sure whether MS does anything to help a System Builder. It could be that you have to enter the key the second time as well. It would be easy for Microsoft to keep a record of each activation, and realize your machine had "burned" a System Builder OEM key. As you're not supposed to be able to transfer such a key to a second machine. But do they do it that way ? Dunno. I have one activation here, where how it happened remains a mystery. The OS is activated, but no qualifying OS was present at the time. I suspect there was some sort of confusion between the Insider Editions I was running and the Release edition. And maybe it came up on an operator "scope" at Microsoft and they just approved it as some sort of bug. I know that two Insider Editions got into a squabble and I had to reenter account and password at one point, while that got worked out. Really, just about anything is possible with that activation server. Paul |
#8
|
|||
|
|||
Can't update W10
On 23-1-2018 14:00, Paul wrote:
Fokke Nauta wrote: Or should I format the SSD and install W10 from scratch again, but this time as a home user? I purchased an OEM license, would I be allright with my activation again? Thanks, Fokke If your Windows Update is working, do you really need to test that ? Well, it's still not working. Downloaded a W10 update repair tool from MS and it fixed several issues. But it still won't update ... The OEM license would likely be a System Builder license, as a royalty license for Win10, would include an MSDM table in the BIOS chip for re-activation. I'm not really sure whether MS does anything to help a System Builder. It could be that you have to enter the key the second time as well. It would be easy for Microsoft to keep a record of each activation, and realize your machine had "burned" a System Builder OEM key. As you're not supposed to be able to transfer such a key to a second machine. But do they do it that way ? Dunno. I have one activation here, where how it happened remains a mystery. The OS is activated, but no qualifying OS was present at the time. I suspect there was some sort of confusion between the Insider Editions I was running and the Release edition. And maybe it came up on an operator "scope" at Microsoft and they just approved it as some sort of bug. I know that two Insider Editions got into a squabble and I had to reenter account and password at one point, while that got worked out. Really, just about anything is possible with that activation server. Paul |
#9
|
|||
|
|||
Can't update W10
Fokke Nauta wrote:
Paul wrote: You can also download updates from catalog.update.microsoft.com. Took a look into that. There are so many drivers that I don't know which ones to choose. Use the search box at the upper right corner to hunt for the updates by number that you want to download. |
#10
|
|||
|
|||
Can't update W10
On 1/23/2018 5:50 AM, Fokke Nauta wrote:
Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says:Â* 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. Fokke Nauta Try the Windows Update Troubleshooter https://support.microsoft.com/en-us/help/10164 Ben |
#11
|
|||
|
|||
Can't update W10
On 1/23/2018 3:02 PM, Ben Myers wrote:
On 1/23/2018 5:50 AM, Fokke Nauta wrote: Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says:Â* 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. Fokke Nauta Try the Windows Update Troubleshooter https://support.microsoft.com/en-us/help/10164 Ben Don't give up it took me some months to finally get my tablet to upgrade to 1709. I can't tell you what I did precisely, but it may have been that not all of the previous version updates had been applied. -- 2017: The year we learn to play the great game of Euchre |
#12
|
|||
|
|||
Can't update W10
Fokke Nauta wrote:
On 23-1-2018 14:00, Paul wrote: Fokke Nauta wrote: Or should I format the SSD and install W10 from scratch again, but this time as a home user? I purchased an OEM license, would I be allright with my activation again? Thanks, Fokke If your Windows Update is working, do you really need to test that ? Well, it's still not working. Downloaded a W10 update repair tool from MS and it fixed several issues. But it still won't update ... Is grabbing a .msu file from catalog.update.microsoft.com working ? I would jam in the files until all of them were accepted. You can use Sysinternals.com Process Monitor, to log all the WriteFile calls, and see where the update is writing. Perhaps it uses CBS logfile ? I've even used Process Monitor to log a Macrium Reflect backup (twenty minutes worth of computing activity), so you can create huge traces with it. My trace in that case was 9GB in size, on an x64 system. Paul |
#13
|
|||
|
|||
Can't update W10
On 01/23/2018 2:33 PM, Keith Nuttle wrote:
On 1/23/2018 3:02 PM, Ben Myers wrote: On 1/23/2018 5:50 AM, Fokke Nauta wrote: Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says:Â* 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. Fokke Nauta Try the Windows Update Troubleshooter https://support.microsoft.com/en-us/help/10164 Ben Don't give up it took me some months to finally get my tablet to upgrade to 1709.Â* I can't tell you what I did precisely, but it may have been that not all ofÂ* the previous version updates had been applied. Might this help? Paul would Know. DISM.exe /Online /Cleanup-image /Restorehealth Rene |
#14
|
|||
|
|||
Can't update W10
Rene Lamontagne wrote:
On 01/23/2018 2:33 PM, Keith Nuttle wrote: On 1/23/2018 3:02 PM, Ben Myers wrote: On 1/23/2018 5:50 AM, Fokke Nauta wrote: Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says: 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. Fokke Nauta Try the Windows Update Troubleshooter https://support.microsoft.com/en-us/help/10164 Ben Don't give up it took me some months to finally get my tablet to upgrade to 1709. I can't tell you what I did precisely, but it may have been that not all of the previous version updates had been applied. Might this help? Paul would Know. DISM.exe /Online /Cleanup-image /Restorehealth Rene Isn't this a fresh install though ? What are the odds a fresh install has a damaged WinSXS ? I'd like to get some tiny hint from the OP, that'll head us in the right direction. Finding the right log file would be a start. Is that the CBS log ? Or some other log ? Paul |
#15
|
|||
|
|||
Can't update W10
On 01/23/2018 4:22 PM, Paul wrote:
Rene Lamontagne wrote: On 01/23/2018 2:33 PM, Keith Nuttle wrote: On 1/23/2018 3:02 PM, Ben Myers wrote: On 1/23/2018 5:50 AM, Fokke Nauta wrote: Hi all, Recently built a new pc and installed W10 Pro x64. Always worked with W7; W10 is new to me. Installation worked will, all necessary programs are installed. But I can't update Windows. It says:Â* 2017-12 Cumulative Update for Windows 10 Version 1709 for x64-based Systems (KB4054517). Awaiting restart. After restarting it says: We could'n finish installing updates. Then it shows an overview: KB4054517 (9) failed to install KB4056887 Requires restart KB4058043 Requires restart KB4056892 failed to install So - what's wrong here? Whilst installing W10 I was asked to choose as to whether using it as a home pc or a company pc. I choosed company pc, as it works in our LAN as a file-, print- and webserver. Sort of NAS. Perhaps some settings now prevent a normal update? Thanks in advance for your help. Fokke Nauta Try the Windows Update Troubleshooter https://support.microsoft.com/en-us/help/10164 Ben Don't give up it took me some months to finally get my tablet to upgrade to 1709.Â* I can't tell you what I did precisely, but it may have been that not all ofÂ* the previous version updates had been applied. Might this help? Paul would Know. DISM.exe /Online /Cleanup-image /Restorehealth Rene Isn't this a fresh install though ? What are the odds a fresh install has a damaged WinSXS ? I'd like to get some tiny hint from the OP, that'll head us in the right direction. Finding the right log file would be a start. Is that the CBS log ? Or some other log ? Â*Â* Paul It sounds like a clean install but he mentions win 7 in the same sentence! so I'm not sure. I have only used this command on an upgraded system so not sure if it would help a new install, May be worth a shot anyway in case all the trying to upgrade may have done some damage. Rene |
|
Thread Tools | |
Display Modes | Rate This Thread |
|
|