A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Hardware and Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

usb problem



 
 
Thread Tools Display Modes
  #1  
Old January 5th 05, 06:01 PM
GAURAV
external usenet poster
 
Posts: n/a
Default usb problem

gaurav wrote:
i have a laptop zepto znote 4200. i recently connected it to my pc
via usb cable. when removing the cable i safely removed it from my pc
first and then unplugged it. and then i got a white screen on the
laptop that wudnt go. i had to cold reboot. after rebooting whenever
i connect any usb device to my laptop it says bandwidth exceeded
press reset to reset the usb port or press close to close this
window.......if you press close you will not be able to use the usb
port. even after resetting i got this error whenever i connected and
usb device. so in the end i tried pressing close. and since then i
havnt been able to use any of my 3 usb ports. now it doesnt even
detect when i plug in a device. i alredy went into the device manager
and checked the ports and the hub .........it says they are working
fine. i even tried reinstalling the drivers but to no avail. pls
help!!--
gaurav

Ads
  #2  
Old January 5th 05, 08:27 PM
Yves Leclerc
external usenet poster
 
Posts: n/a
Default usb problem

You can/should not use a Standard USB cable to connect 2 PCs, be them
Laptops or standard PCs. You need to use a special inter-connect USB cable.

You now may have phyically blown the USB controller ports/chip and you may
have to replace the USB system in your PC.

"GAURAV" wrote in message
...
gaurav wrote:
i have a laptop zepto znote 4200. i recently connected it to my pc
via usb cable. when removing the cable i safely removed it from my pc
first and then unplugged it. and then i got a white screen on the
laptop that wudnt go. i had to cold reboot. after rebooting whenever
i connect any usb device to my laptop it says bandwidth exceeded
press reset to reset the usb port or press close to close this
window.......if you press close you will not be able to use the usb
port. even after resetting i got this error whenever i connected and
usb device. so in the end i tried pressing close. and since then i
havnt been able to use any of my 3 usb ports. now it doesnt even
detect when i plug in a device. i alredy went into the device manager
and checked the ports and the hub .........it says they are working
fine. i even tried reinstalling the drivers but to no avail. pls
help!!--
gaurav



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Explorer crashing on context menu Sgt. Pepper General XP issues or comments 3 January 5th 05 03:18 AM
Error during every search Brennon Bortz General XP issues or comments 6 January 4th 05 11:34 PM
Can't open control panel fadja General XP issues or comments 2 January 3rd 05 10:03 PM
Restart problem Shaga Windows XP Help and Support 1 October 21st 04 11:23 AM
Restart problem Shaga Hardware and Windows XP 0 October 21st 04 03:59 AM






All times are GMT +1. The time now is 03:57 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.